VWR Incu-Line Incubator Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Heraeus B5060 EK CO2 Incubator This item was removed from a university lab where it was surplus to r (more)equirements. The unit is in good clean condition with intact feet and a door seal and catch in good condition. It powered on, and the controls and digital displays were functioning as intended.The unit powers up and is in good working order (thermometer & CO2 analyser not included). CO2 stabilised at 5%. Specifications: - Internal Dimensions: L 60cm x W 51cm x H 55cm - Five shelves fitted - No UV lamp fitted - Over temperature cut-off working No further testing carried out. Model: B5060 EKSerial No: 8607594

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

This was removed from a university lab where it was surplus to requirements. Both incubators power u (more)p and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order. The incubators are in good cosmetic condition with only minor marks from use. Top:-Model - MCO-20AICSN - 01212218External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm Bottom:-Model - MCO-20AICSN - 01212221External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm

This item has just arrived in our stock. Please enquire for further details.

Baker Hypoxycool Culture Media Hypoxia Conditioner This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside. It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility. Internal dimensions 38 x 38 x 30cm (LxWxH)

Memmert BE300 incubator. Capacity 39 L. Max temperature: 70ºC. Stainless steel. 2 shelves. Inner gla (more)ss door. Ignition module: 3 indicators, fresh air regulator and manual ignition controller. Work control module: rotary controller and set for temperature and programs. Timer from 1 to 999 min. Overheating control and time self-diagnosis. RS232C. Dimensions (LHD): inner 480*320*250 mm, external 630*435*595 mm. Includes manual. Optimize your experiments with the Memmert BE300 Incubator, available at Galileo Equipment. Perfect for applications in microbiology, cell research, and stability testing, this oven offers precise temperature control and thermal uniformity. Its robust design and advanced technology guarantee consistent and reliable results. With ease of use and energy efficiency, the Memmert BE300 is the ideal choice for demanding laboratories. Buy now and take advantage of our exclusive offers to improve your laboratory performance with this high-quality oven!

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Agilent 2100 Bioanalyzer is a unique and versatile analysis tool designed to efficiently handle  (more)nucleic acids, proteins and cells on a single platform. Designed to eliminate time-consuming procedures, the Agilent 2100 system employs micro-fabricated chips which accommodate up to 12-wells requiring minimum sample consumption in the low µl-range. The compact and powerful system design of this Agilent Bionalyzer enables easy, fast, and efficient sample handling, detection, separation, and data analysis. The 2100 system prevents potential mistakes in data interpretation and storage using its efficient lab-on-a-chip technology. This bioanalyzer helps enhance PCR reactions for a variety of procedures including gene expression and  cloning. With its advanced microarrays and microarray scanner, the Agilent 2100 provides accurate solutions for gene expression analysis. The device can be used with Agilent’s add-on pressure cartridge, cell fluorescence software, and Cell LabChip for a wide range of cell applications and cytometric analyses (all not included). Including PC

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to r (more)equirements. The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples. It is in very good cosmetic condition with only minor marks from use.

A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg Capac (more)ity 42 g / 210 g Readability 0.01 mg / 0.1 mg Repeatability 0.02 mg / 0.1 mg Features - Precision semi-micro balance with dual-range readability of 0.01 mg / 0.1 mg for high-accuracy applications requiring consistent, reliable results across a wide dual capacity range - Splash/Dust Proof Membrane Keypad - Easy to clean antistatic breeze break, ABS housing, and SS pan, spill ring, dust plate & base floor - Stable die cast aluminum base with built-in internal weight that performs automatic self-calibration - Easy to see large .7in (17.8mm) LCD display with simple 6 button keypad interface - Super visible front mounted spirit level bubble helps reduce leveling time and increase accuracy - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Space saving footprint and collapsible doors maximize valuable bench space and reduce breeze break mishaps - Handy step card and door control lever opens either side of the weighing chamber for quick and efficient access - Easy-click door lock joints enable user to quickly configure doors to fit weighing work flows The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg, is crafted for precision and ease of use, equipped with advanced features tailored to meet the demands of diverse laboratory environments. With dual capacities of 42 g and 210 g, and an impressive readability of 0.01 mg in the lower range and 0.1 mg in the higher, it ensures exceptional precision for critical measurements. Its splash and dust-proof membrane keypad, along with a robust die-cast aluminum base, provides durability and stability. The built-in internal calibration weight enables automatic self-calibration, ensuring consistent accuracy. A large 0.7-inch LCD display and straightforward six-button keypad interface make the balance easy to read and operate, while the front-mounted spirit level bubble helps users quickly achieve accurate leveling. With an anti-static breeze break and ABS housing, along with stainless steel components such as the pan, spill ring, and base floor, the Gemini GR-202 is designed for easy maintenance and long-lasting performance. The compact footprint and collapsible doors save valuable bench space and reduce accidental mishaps, while easy-click door lock joints allow users to adjust the chamber for convenient access and workflow efficiency. The Full Digital Calibration function supports both internal and external calibration, allowing quick, reliable calibration on site for peak performance. For data management, this model includes a memory function to store up to 200 weighing data records and complies with GLP/GMP/GCP/ISO output standards. Connectivity options include bi-directional RS-232C, and with the underhook for below-weighing applications, the Gemini GR-202 adapts to various tasks with precision. Supported by a 5-year warranty, this balance ensures reliable performance for your lab’s most critical measurements. INCLUDED: The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg includes: - Weighing Pan - Fine Range Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Accuris AP1096 IsoPure 96 Automated Purification System Sample Capacity 96 Samples / 50ul to 1000ul  (more)Display 7.0 Inch Color Touch Screen Program Memory 100 Programs (Internal Memory) Features - Compatible with all popular magnetic bead kits - Touch screen panel for on-board programming and operation - Process up to 96 samples in deep-well plates - 8-position carousel with 2 heating blocks - Sample volumes from 50µl to 1000µl - Lysis and elution temperature range of Ambient +5°C to 120°C - Variable mixing speeds with 10 levels to select from - Ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants The Accuris AP1096 IsoPure 96 Automated Purification System is a high throughput, automated system that improves the efficiency and reproducibility of magnetic bead-based purification protocols. Capable of processing up to 96 samples at one time, the instrument is easy to set up and program. Mixing, magnetic bead transfer, washing, and elution steps are performed automatically. The purification process can be completed within 10 to 60 minutes depending on the type of reagent kit used and complexity of the program. The IsoPure™ 96 can be programmed by using the color touch screen or the included mouse. After a protocol has been created, the instrument will calculate and display the estimated time for each step and the total time. Typical step settings include: - Tip Comb Loading and Unloading: Automate tip comb loading and unloading by designating the respective plate positions in the script. - Mixing: Parameters for mixing time, speed, and amplitude can be programmed for each step of the protocol. - Temperature Control: Heating of the sample mixture during the lysis and elution steps significantly improves the purity and yield of the target molecule. The IsoPure 96 is equipped with 2 heating blocks on the plate carousel that can be precisely set to temperatures from ambient + 5°C to 120°C. IsoPure deep well plates fit into the heating blocks for efficient heat transfer. A cooling fan inside the processing chamber maintains the ambient operating temperature to ensure consistent results. - Bead Collection and Release: The complete collection of magnetic beads from sample mixtures is crucial for maximizing the yield of purified analytes. The IsoPure software offers full control of magnetic parameters to ensure cleaner extractions. General settings allow control of magnet speed, position, repeat collection cycles, etc, to guarantee consistent yields. Accuris Instruments has partnered with leading magnetic bead kit manufacturers to develop and optimize protocols for specific applications. To request scripts for specific kits, or for assistance in optimization, please contact us. An ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants. This additional safeguard reduces the possibility of unwanted DNA/RNA contamination of critical samples that could be amplified downstream in a PCR detection assay. UV sterilization time can be adjusted based on specific program requirements to ensure a sterile environment prior to purification. The IsoPure 96 can store up to 100 program files which can be transferred between instruments, or to a computer for storage or sharing. Simply insert the included flash drive to export the selected files. Programming control can be done via the touch screen, or by using the included mouse. A PC can also be connected for remote programming. Accuris offers high-quality deep well plates and magnetic tip combs designed to fit the IsoPure 96. Produced using virgin polypropylene and packaged in a sterile facility, these consumables are guaranteed to be contaminant-free. The IsoPure 96 also accepts industry-standard 96 deep well plates and tip combs designed for high throughput purification systems. INCLUDED: The Accuris AP1096 IsoPure 96 Automated Purification System includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty