Vortem 1550 Shaking Incubator LABNET

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 With support bases height 200 mm on casters Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021 Some marks on one of the walls (see photos)

MEMMERT ULE 500 / 220 ° C drying oven / incubator with forced convection Drying cabinet Capacity: 10 (more)8 litres External dimensions: (W) x (D) x (H): 57 x 75.5 x 71 cm Internal dimensions: (W) x (D) x (H): 37 x 46 x 54cm zinc-plated steel back Temperature range • from +30 ° C (however, at least 10 ° C above ambient temperature) to +220 ° C 2 perforated stainless steel shelves, non-tilting 230 V 50/60 Hz 2000 W Weight: 55 kg Tested at 150 ° C It must be set to 156 ° C to have 150 ° C. You must therefore add 4% to the desired value. (for example to have 105°C you have to put 109°C) In terms of linearity and fluctuation, it is very good, the temperature fluctuates by more or less 0.3°C light traces inside and the stainless steel exterior walls

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Orbital shaker with Ohaus incubator and cooling The innovative OHAUS incubating cooling shakers are  (more)designed to have a wide temperature range from 10°C below ambient up to 65°C to ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - Prepared for the use of microplates, without the need for accessories, and can easily accommodate modular blocks thanks to the block adapter supplied. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The innovative design with Peltier system, for direct contact between plate and sample, ensures rapid and uniform heating and cooling precision. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicator Technical Specifications - ISICMBCDG - Calibration: temperature calibration - Transmission System: Brushless DC Motor; triple Eccentric - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Speed ​​range: 100 to 1,200 rpm - Timer: 1 second to 160 hours - Tray structure: aluminum

Ohaus Defender 3000 Bench Scale Designed with convenience in mind, but without compromising on quali (more)ty. The OHAUS Defender 3000 scale is ideal for general purpose weighing and simple counting applications in manufacturing, packaging, warehouse, inventory, shipping and receiving environments. Features: tubular frame with basic, simple and robust design, tactile key indicators, backlit LCD display, built-in rechargeable battery operation and flexible mounting options. Applications Weighing, piece counting Display Backlit liquid crystal display (LCD) Operation AC adapter (included) or rechargeable battery (included) Communication Easy access communication port with RS232 interface (included) Structure ABS indicator with reversible rear cover, painted steel column and wall bracket, 304 stainless steel platform with painted tubular steel frame, IP67 aluminum load cell, stainless steel foot Construction features 125% overload protection Technical features: Authorization for trade EC type-approved; Measurement Approval Canada; NTEP certified Battery life 100 hours with rechargeable battery Lid in use Available as an accessory Releases Not applicable Platform structure Stainless steel Degree of protection Not applicable Second scale input Not applicable Tare range A flow rate by subtractio

VACUUBRAND MV 10C NT Chemistry Diaphragm Pump Ultimate Vacuum 0.9 mbar / 0.68 torr Maximum Pumping  (more)Speed 5.6 CFM at 60Hz Number of Heads/Stages 8/4 Features - Outstanding chemical resistance and superior vapor tolerance - Reduced process time due to very high flow rates even close to ultimate vacuum - Very low vibration and quiet - Excellent ultimate vacuum even with gas ballast - Excellent environmental friendliness due to efficient solvent recovery (on models with EK accessory) Four-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet the highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0.9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. Upgraded with an exhaust waste vapor condenser (EK) the MV 10C NT +EK provides an excellent, environmentally friendly system with efficient solvent recovery. A separator for the inlet (AK) made of glass (with protective coating) against particles and liquid droplets is available as an optional accessory. The high pumping speed and excellent ultimate vacuum of the MV 10C NT reduces the process time significantly. The pump meets the high vacuum requirements, e.g., of parallel processes in vacuum networks. Further typical applications are vacuum ovens, large rotary evaporators, pilot plants and mini plants as well as kilo laboratories. For rough operating conditions we recommend an inlet separator (AK) to protect the pump from particles and liquid droplets. The exhaust waste vapor condenser on the MV 10C NT +EK (also available as accessory) enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment. INCLUDED: The VACUUBRAND MV 10C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z327-K Centrifuge Blood Tube Bundle w/ swing out rotor for 10/15ml and 1.8/7ml tubes, 115V Sp (more)eed Range 200 to 18,000 RPM Max Capacity 4 x 200ml Max. RCF 23,542 x g Features - 120 V / 50-60Hz - Speed Range: 200 to 18,000 rpm - Max. RCF: 23,542 xg - Max. Capacity: 4 x 200 ml - Timer: up to 99 hr., 59min and continuous - Swing out rotors accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml) - Swing out plate rotor accepts deepwell plates - Extremely versatile, 17 rotor options - High speed rotors (up to 23,542 xg) Introducing the Hermle Z327-K Centrifuge Blood Tube Bundle, the ultimate solution for processing blood samples in clinical laboratories and blood banks. This bundle includes a swing out rotor that can accommodate 10/15ml and 1.8/7ml tubes, providing versatility for different blood collection tubes. With a voltage of 120 V / 50-60Hz, this centrifuge is highly efficient and reliable, ensuring consistent and accurate results. Its speed range of 200 to 18,000 rpm and a maximum RCF of 23,542 xg allows for quick and efficient separation of blood components, making it a valuable asset for any laboratory setting. The Hermle Z327-K Centrifuge Blood Tube Bundle features an advanced timer that can be set up to 99 hr., 59min, and continuous operation, providing enhanced control and precision during operation. With its swing out rotors capable of accepting up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml), and a swing-out plate rotor that accepts deepwell plates, this centrifuge offers unmatched versatility with 17 rotor options to choose from. Safety and convenience are also at the forefront of this bundle's design, with an advanced safety mechanism that ensures the rotor stays locked during operation, minimizing the risk of accidents. Its compact and lightweight design makes it easy to use and transport, while its intuitive controls and digital display allow for easy operation and monitoring. In summary, the Hermle Z327-K Centrifuge Blood Tube Bundle is an essential tool for any clinical laboratory or blood bank that demands high-quality and reliable results. Its advanced features and comprehensive package offer unmatched efficiency, precision, and convenience in blood sample preparation and separation. INCLUDED: The Hermle Z327-K Centrifuge Blood Tube Bundle w/ swing out rotor for 10/15ml and 1.8/7ml tubes, 115V includes: - Refrigerated Centrifuge (120V) - 4 x 200 ml swing out rotor - 4 x 200ml round bucket for Z327-200-AC - 7 x 10/15ml round insert for Z327-200-BUK (2 pack) - 8 x 1.8-7ml blood tube insert for Z327-200-BUK (2 pack) - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW