Thermo Scientific MaxQ 5000 Refrigerated Incubator Shaker SHKA5000-8CE Lab

Oaken Commercial Incubator & Hatcher This item was removed from a university lab where it was su (more)rplus to requirements. The incubator powers on, with the internal light and fan in working order. The unit is in reasonable cosmetic condition and in working order (thermometer not included). Includes:- 12 x Egg Trays (Dimensions: 50 x 36 cm, each holding up to 88 eggs)

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, (more) 115V Refrigerant R134A Operating Temperature Range Ambient +10-50°C Temperature Accuracy ±0.3°C Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention - Interior light for better sample visibility - Optional slide shaker table available to put in and take out samples easily Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Programmable. High accuracy temperature control and temperature distribution. Inner glass door keeps temperature stable during sample observation. Operating temperature range: -10~ + 50° CINCLUDED: The Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range A (more)mbient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V provides precise and energy-efficient temperature control, ideal for laboratories needing reliable incubation solutions. With a 32-liter capacity and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, this incubator offers flexibility for a wide range of applications. The advanced Peltier heating and cooling system, combined with individually controlled upper and lower elements, ensures even temperature distribution. The intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller makes it easy to monitor and adjust settings, while the SetpointWAIT function ensures processes only start when the desired temperature is reached. Safety is paramount in the IPP30plus, with over- and undertemperature monitors and the integrated AutoSAFETY protection system providing visual and acoustic alarms in case of deviation. The incubator's stainless steel interior and textured exterior are built for durability, offering resistance to corrosion and easy cleaning. It also features three freely selectable temperature calibration points for precision control, and an autodiagnostic system for fault detection, ensuring long-term reliability in any laboratory setting. INCLUDED: The Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP2200eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP2200eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP2200eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark SureTherm CO2 Incubator, 45L, 115V w/ Two Shelves Cell cultures depend on optimized growth (more) conditions in order to thrive. With precise temperature and CO₂ control, Benchmark’s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real time”. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.* * Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)

Closed, rectangular tunnel equipped with integrated electronic system. To be installed on band conve (more)yors. Industry: - Food; - Cosmetic; - Chemical and pharmaceutical; - Others. Use: - Quality control; - Customer protection; - Machine protection. Main advantages: - Compact look; - Easy and comfortable to use menu; - Touch panel. Optional equipment: • Test cards - ball (balls) melted in plastic, used for sensitivity checking (numerous types and diameters – with certificates, if needed); • Signalling device – sound and light signals; • Printer: - with RS 232 port (maximal cable length 100 meters); - with RS 485 port (maximal cable length 1200 meters); • Integrated IT solutions: - mesuset (detector operation via laptop); - mesunet (web integration and remote operating); - others; • Voltage control system: - magnetic stabilizer; - electronic stabilizer; • Remote deleting switch-key; • Transmission and mechanical separation systems solutions; • Recoil system: - lateral actuator system; - trigger flap system; - tape stranding device; - others; • Markers: - pressure paint nozzle marking system; - sack marker; - others; • Belt conveyor flight operating: -“maneuverable” belt conveyor flight; - others.

Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber Temperature Setpoint Ra (more)nge 4°C to 70°C Humidity Setpoint Range 15 to 95% RH Capacity 23 cu. ft. (651.3L) Features - Designed for rigorous scientific and laboratory research requirements - Self-closing, right-hinged solid door and three 304 stainless steel sliding tray shelves - PID controller with graphic display, programmable ramp and soak functions, and process phase graphic animations - USB data port, RS-485 communication (MODBUS-RTU), real-time clock, battery backup, and event logs - Foamed-in-place polyurethane foam insulation and white powder-coated steel exterior - Top-mounted variable speed compressor and hydrocarbon natural refrigerant - Multi-element proportional electric heating and shielded interior LED lighting - Heavy-duty door handle, magnetic door gasket, keyed door lock, and probe access port The Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber is designed to meet the rigorous demands of scientific and laboratory research. This 23 cu. ft. capacity chamber features advanced engineering in cabinet construction, refrigeration, temperature control, and monitoring to ensure energy-efficient, safe, and reliable performance. It includes a self-closing, right-hinged solid door and three 304 stainless steel sliding tray shelves. The PID controller with a graphic display offers programmable ramp and soak functions, process phase graphic animations, a USB data port, RS-485 communication (MODBUS-RTU), a real-time clock, battery backup, and event logs. The chamber provides precise temperature control from 4°C to 70°C with ± 0.1°C accuracy, ± 0.5°C stability, and ± 1°C uniformity. Additional features include foamed-in-place polyurethane foam insulation, a white powder-coated steel exterior, a 304 stainless steel interior, plenum air distribution, a top-mounted variable speed compressor, hydrocarbon natural refrigerant, multi-element proportional electric heating, shielded interior LED lighting, a heavy-duty door handle, magnetic door gasket, keyed door lock, and a probe access port. This chamber is ideal for a wide range of applications in life science, pharmacy, biological, medical, clinical, and industrial fields. INCLUDED: The Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber includes: - Key for Door Lock - 3 x Sliding Shelves - Power Cord - Operator's Manual - 18 Month Manufacturer's Warranty

Benchmark MC-12 High Speed Microcentrifuge Benchmark’s MC-12 is the first and only compact microcent (more)rifuge capable of achieving centrifugal speeds up to the critical threshold of 16,000 x g, often held as the standard for many molecular biology/DNA protocols. Its brushless, maintenance free drive system makes it powerful, yet compact enough to allow each work station to be fully equipped with a personal centrifuge. The MC-12 defines a new class of microcentrifuge: compact, quick, powerful and affordable. All aspects of microcentrifuge performance were taken into consideration and no compromises were made. In addition to its unsurpassed speed, the MC-12 also delivers shortened acceleration/deceleration times, whisper quiet operation, and its computer-designed airflow pattern minimizes sample temperature increases during longer runs at high speeds. All operating parameters are set using a single, conveniently located control knob and the large, bright LCD provides a clear indication of time and rpm or g-force. A separate momentary spin button permits instant spin downs, without setting or disturbing any preset parameters. The aircraft grade aluminum rotor accepts 1.5 to 2.0ml tubes directly, as well as 0.5ml and 0.2ml tubes with optional adapters. For applications requiring sub-ambient temperatures, the MC-12 is cold room safe. INCLUDED: The Benchmark MC-12 High Speed Microcentrifuge includes: - 12 Place Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty