Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

SANYO MIR-152 refrigerated incubator / oven - with forced convection -10 / 50 ° C Model: SANYO PHCBI (more) MIR 152 refrigerated and ventilated Capacity: 126 liters Temperature range: -10 ° C to 50 ° C Glass on the front Integrated digital temperature display 1 shelf With internal lighting Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 220 W, Internal dimensions: 62 x 38 x 55 cm Overall dimensions: 70 x 58 x 102 cm Weight: 70 kg Tested at 37 ° C and 4 ° C

Temperature range: Ambient +10°C tot 60°C Temperature control: ± 0.1°C Temperature uniformity: ± 0,3 (more)°C Humidity range: Ambient to 95% RH Humidity control: ± 3% RH CO2 range: 0 – 20% CO2 control: ± 0.1% External dimensions (WxDxH): 902 x 846 x 1958 mm Internal dimensions (WxDxH): 813 x 686 x 1339 mm Shelf dimensions (WxD): 743 x 621 mm Nett volume: 708 liter Nett weight: 374 kg

This Labnet Vortemp 56 Microplate Shaking Incubator was removed from a university lab where it was s (more)urplus to requirements. The item powers on and runs up to 120rpm. It was tested with a digital thermometer (not included).When the temperature was set to 37˚c, the thermometer read 35˚c.When the temperature was set to 99.5˚c, the thermometer read 94˚c.Both temperatures were reached relatively quickly. It holds 56 x 2.0ml tubes. The item is in reasonably good used cosmetic condition with marks and scratches.

Sanyo C02 Incubator Model: MCO-19AIC (UV) Lab This item was removed from a university where it was s (more)urplus to requirement. The unit powers up, is in good cosmetic condition, and has been temperature tested (thermometer & CO2 probe not included).When the CO2 was tested, the unit did not stabilize at 5% and instead rose to 8.2% - 8.4% during testing. Therefore, it is listed as Spares/Repair. Internal Dimensions: L 45cm x W 44cm x H 66cm.

Thermo Scientific BB15 Function Line CO₂ Double Stack Incubators This item was removed from a univer (more)sity laboratory where it was surplus to requirements. Both incubators are in good used cosmetic condition, with the copper lining showing typical discolouration associated with copper. They have been tested and performed as expected. Testing Summary: - Minimum temperature tested: ~18ºC - Calibrated at 37ºC and 5% CO₂ (overnight run) - Maximum temperature tested: 55ºC Note: Re-calibration is required after installation to ensure optimal performance.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

19 x Thermo Scientific BioProcess Container Tank Liners Non Irradiated 100L This was removed from a  (more)university lab where it was surplus to requirements. All items are brand new in their original packaging. Part#: SH30642.02Lot#: ECH256646Date: AUG/2017 Total Bags: 19

Zeiss Axioplan 2 Imaging Fluorescence Microscope w/ Lamp PSU, HBO/HAL Lab This system was removed fr (more)om a university where it was surplus to requirement. The system is in good cosmetic condition with all included units powering on without any issues. The motorized stage and filter turret, are functioning as intended. The lamp PSU works but does not show lamp hours. We would recommend setting this up with a new mercury lamp system. Modules included: Eyepieces:- 2x Zeiss Pl 10x 25 (P/N: 44 40 34) Nosepiece:- 1x 6-position nosepiece, fitted with the following 2 objectives: - Zeiss CP-ACHROMAT 5x/0.12 ∞/- (P/N: 44 09 20) - Zeiss EC Plan-NEOFLUAR 100x/1.30 oil ∞/0.17 (P/N: 1018-595, 1066-987) Additional items:- 1x Carl Zeiss HBO 100 lamp house (P/N: 1007-980) - 1x Carl Zeiss HAL 100 12v 100w lamp house (P/N: 1039-685) - 1x LEJ ebq 100 lamp power supply (P/N: 1003-928, 426-784) S/N: N40418608 - 1x Zeiss Condenser Achromatic-Aplanatic Swing Out (P/N: 1035-632) - 1x Zeiss Mechanical Stage (P/N: 1067-325) - 1x Zeiss Reflector Turret 322 Synchroflex T 2.5 5/500 with the following filters/cubes: - Filter Set 20, BP 546/12, FT560, BP 575-640 - 02, G365, FT395, LP 420 - Filter Set 10, BP 450/490, FT510, BP 515-565 - 41007, HQ - P/N: 424931 - 30, 150020, Aqua - 2x Iris Stop Slider (P/N: 1062-360) - 1x Filter Slide (P/N: 45 21 74) - 1x VGA type connection cable

Memmert IF110plus Forced Circulation Incubator 108L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 108 L (3.8 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF110plus Forced Circulation Incubator 108L, 115V offers a precise working temperature range starting from Min. 10°C above ambient up to +80°C with 0.1°C accuracy, ensuring optimal environmental conditions for laboratory processes. Its spacious 108 L (3.8 cu.ft.) stainless steel interior is designed for durability and ease of cleaning, making it ideal for routine use in demanding lab environments. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, equipped with two high-definition TFT-color displays, allows users to easily monitor and adjust key parameters like temperature, fan speed, and air flap position, all with intuitive control. For enhanced safety, the IF110plus features AutoSAFETY with integrated over- and undertemperature monitoring and a mechanical temperature limiter TB for additional protection. The Function SetpointWAIT ensures the process begins only once the desired temperature is reached, increasing precision. Additionally, the incubator includes a fixed sterilization program, which operates at 160°C for 4 hours to clean the chamber. With forced air circulation, adjustable in 10% steps, and the ability to manage fresh air admixture, this incubator is both efficient and reliable for various laboratory applications. INCLUDED: The Memmert IF110plus Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.