Table on wheels for BINDER incubator 85 x 76 x 44.5cm

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. It is supplied with a trolley

Boekel Scientific 260700 Microplate Incubator, 115V The Boekel Scientific 260700 Microplate Incubato (more)r, 115V isgreat for places with little space or when you need a dedicated incubator formicroplates or petri dishes. The unit has set temperature of 37C and this canbe adjusted with the dial in the back of the unit. The chamber is accessedthrough a see-through, flip-up door. A temperature indicating liquid crystalstrip is used to monitor the temperature. Features•Small design•Liquid crystal temperature indication strip•Flip-up see through door•Ideal for microplates and small petri dishes•Heating indicator light•Adjustable temperature•Heat supplied from back of unit to eliminate overheating samplesClick Here to View Product Video INCLUDED: The Boekel Scientific 260700 Microplate Incubator, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity for flexible storage and temperature control - Setting temperature range from 0°C to +70°C with 0.1°C accuracy - Energy-saving Peltier heating/cooling system integrated in the rear - ControlCOCKPIT with adaptive multifunctional PID-microprocessor controller and high-definition TFT-color display - Process time starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration values for precise control - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel exterior The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V offers precise temperature control with an energy-efficient Peltier heating and cooling system. Designed for laboratory environments, this incubator features a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, ensuring consistent results across a variety of applications. The ControlCOCKPIT adaptive multifunctional PID-microprocessor controller with a high-definition TFT-color display provides intuitive control, while the SetpointWAIT function ensures that processes only begin once the desired temperature is reached. Built with a 53-liter stainless steel interior, this incubator is both robust and easy to clean, making it ideal for long-term use. It supports up to four shelves with a maximum chamber load of 176 lbs, providing ample space for different sample sizes. Safety is a priority with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and an autodiagnostic system for fault analysis. With its durable textured stainless steel exterior, the IPP55 is built to withstand the rigors of daily laboratory use while maintaining high performance and reliability. INCLUDED: The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Temperature range: 30°C to 40°C Net content: 610 litres Dimensions (WxDxH): 715 x 800 x 2012 mm Inte (more)rnal dimensions (WxDxH): 590 x 675 x 1400 mm

Faithful HWS Series constant temperature and humidity incubators. Volume: 70 L (HWS-70B), 150 L (HW (more)S-150B) and 250 L (HWS-250B). Forced ventilation. Temperature range: with humidity 10 to 65 ∫ C; humidity 0 to 65ºC. Resolution 0.1 ºC. Stability: high temperature ± 0.5 ºC; low-temperature ± 1ºC. Uniformity ± 1ºC. Humidifier ultrasonic manual. Range humidity 45% - 95%. Stability humidity ± 5% RH. Stainless steel. Antiescarcha. Control automatic humidity/temperature. Timer 0-99,9 h/cycle. Control over temperature. Automatic recovery after cutting. Interior light. Not CFC. Optional: sterilization by UV light, printer, RS485, alarm, SMS, wireless, USB, data storage, touch screen. The price shown is for the model 70 L (HWS-70B). For other models, use the drop-down.

Motic PSM-1000 Trinocular Upright Industrial Microscope, Standard System Objectives Optional Optica (more)l System Spectrums ranging from NUV to visible to NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Design encourages the optimal amount of usability without sacrificing comfort - Standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR] - Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke - Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MPS Y device consists of the electromagnetic module of high resolution and Y operation panel equippe (more)d with LCD. It has been designed to be easily integrated into customer-owned weighing systems, and therefore can be built either into technological line or inside weighing devices or laboratory equipment. The MPS Y allows to perform the measurements using the under-pan weighing method or a regular weighing pan. In case of the under-pan method the load is suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2xUSB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi. MPS.Y can also be integrated with E2R Weighing Records and E2R PGC.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Single-channel micropipette E4 XLS - model LTS - 1 - 10 ml RAININ METTLER TOLEDO Model LTS: 1 to 10m (more)l Manufacturer reference: 17012313 Volume: 1 - 10 ml