Table on wheels for BINDER incubator 83 x 60 x 50cm

BINDER BED-53 incubator / oven with natural convection 100°C Model: BED53 / BD 53 Capacity: 53 liter (more)s Temperature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 40 x 40 x 33 cm Overall dimensions: 63.5 x 64.5 x 61.5 cm Weight: 41 kg Tested at 37°C (temperature recorded: 35.5°C)

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers but requires a replacement compressor and recharge as well as a new drive belt. It is sold for spares/repairs.

Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.)cu.ft.) Features - 384 L (13.6 cu. ft.) volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert HPP410eco Climate Chamber 384L, 115V offers precise climate control for a wide range of laboratory applications. With a 384-liter capacity and a temperature range from +5°C to +70°C (with humidity) or 0°C to +70°C (without humidity), this chamber provides versatile conditions for storage and incubation. Equipped with dual Pt100 sensors for accurate temperature control to 0.1°C, it ensures reliable performance and consistent environmental conditions. The adjustable humidity range from 10% to 90% RH, controlled by a hot steam generator and dehumidified by Peltier technology, allows for flexible climate simulation, making it ideal for sensitive samples. The TwinDISPLAY control system, powered by a PID microprocessor, ensures easy and precise adjustments, while the AtmoCONTROL software enables programmability via USB or Ethernet. Safety is a top priority, with the integrated AutoSAFETY system offering visual and acoustic alarms for over- and undertemperature protection. The durable stainless steel door with a 2-point locking system and an inner glass door provides secure access while maintaining energy efficiency. With a maximum chamber load of 440 lbs and support for up to 14 shelves, the HPP410eco delivers exceptional capacity and reliability for demanding laboratory environments. INCLUDED: The Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V Temperature Range Ambient +5°C  (more)to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 56L (2 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180 °C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO50 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. With the K7 active humidity option installed, this CO2 Incubator allows for direct humidity control from 40 to 97% RH, or no RH. Further enhancing its functionality, the ICO50 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO50 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V includes: - 1 x Stainless Steel Perforated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICO105 CO2 Incubator 107L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 107L (3.8 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO105 CO2 Incubator 107L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO105 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO105 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO105 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO105 CO2 Incubator 107L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Metrohm exchange unit 20 ml.

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and the heating is in good working order. Inside tank dimensions - L59 W31 H37cm It is in good cosmetic condition with some marks from use.

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights These were removed f (more)rom a university lab where they were surplus to requirements. Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks. Includes: 10 x  Ohaus 200g weights10 x power supplies4 x manuals These scales also have the option to be operated with AA batteries Max 300gModel number- TA301

Leica S 6D Stereo Microscope 6.3x - 40x with Leica L2 Lightbox and Schott KL 1500 Electronic This sy (more)stem was removed from a university lab where it was surplus to requirements. The Leica S 6D stereo microscope is in good condition with minor wear. The Leica L2 lightbox is missing its power lead, while the Schott KL 1500 light source is in good condition and fully operational. The system comprises the following: - Leica S 6D Stereo Microscope - Model: S 6D - Serial No.: N/A - Leica L2 Lightbox - Model: L2 - Art No.: 10 446385 - Serial No.: N/A - Schott KL 1500 Electronic - Model: KL 1500 - Serial No.: N/A

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.