Snijders EB2-N Refrigerated Incubator

Sanyo MCO-18AC CO2 Incubator This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

Scientific Industries Incubator-Genie SI-1403 Shaking Incubator This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in good working order, but may need slight calibration. (Digital thermometer used for testing, not included). It is in good cosmetic condition with minor marks.

Memmert IF55plus Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 53 L (1.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF55plus Forced Circulation Incubator 53L, 115V provides precise temperature control with a working temperature range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, ensuring reliable performance for various lab applications. Its 53 L (1.1 cu.ft.) stainless steel interior is easy to clean and reinforced for durability, while the TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays offers clear and intuitive control. The incubator features forced air circulation, adjustable in 10% steps, and pre-heated fresh air admixture to maintain uniform temperature throughout the chamber. Safety is prioritized with the inclusion of AutoSAFETY, which integrates over- and undertemperature monitoring, along with a mechanical temperature limiter (TB) for added protection. The Function SetpointWAIT ensures processes only begin once the set temperature is reached, enhancing experimental accuracy. Other key features include a fixed sterilization program for the chamber, autodiagnostic system for fault detection, and a fully insulated stainless steel door with 2-point locking, making it a dependable choice for sensitive laboratory processes. INCLUDED: The Memmert IF55plus Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN110plus Natural Convection Incubator 108L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 108 L (3.8 cu.ft.) for versatile applications - Precise temperature control with 0.1°C setting resolution using 2 Pt100 sensors DIN Class A in a 4-wire circuit - ControlCOCKPIT with TwinDISPLAY offers advanced PID-microprocessor control and two high-definition TFT-color displays - Natural convection with adjustable pre-heated fresh air admixture through electronically controlled air flap - Digital timer with backwards counting, adjustable from 1 minute to 99 days - Two stainless steel, electropolished grids, with a max chamber load of 385 lbs (175 kg) - AtmoCONTROL software for data logging and program management via USB or Ethernet interface The Memmert IN110plus Natural Convection Incubator 108L, 115V offers precision and reliability for a wide range of temperature-sensitive applications. With a spacious 108 L (3.8 cu.ft.) stainless steel chamber, this incubator is designed for natural convection heating, ensuring consistent and uniform temperature distribution throughout the chamber. Its advanced ControlCOCKPIT system with TwinDISPLAY and high-definition TFT-color screens allows for easy adjustments of temperature, air flap position, and timer settings. The temperature range spans from +20 to +80°C with an impressive 0.1°C resolution, delivering exceptional control and stability, aided by two Pt100 sensors in a 4-wire circuit that monitor temperature with accuracy. This incubator also features a digital timer adjustable from 1 minute to 99 days, making it ideal for long-duration experiments. It includes AtmoCONTROL software, providing seamless data logging and program management via USB or Ethernet interfaces. The interior is designed for ease of cleaning and durability, with two stainless steel grids capable of supporting up to 385 lbs. Safety is paramount with integrated overtemperature protection and an autodiagnostic system that alerts users visually and audibly in case of any issues. INCLUDED: TheMemmert IN110plus Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surpl (more)us to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation. It is in good cosmetic condition with minor marks. Internal dimensions are: L41cm x W41cm x H60cm.

Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V Temperature Range -10°C to 60°C w/o H (more)umidity (+10°C to 60°C w/ Humidity and/or Light) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Integrated illumination box with programmable daylight (6,500 K) and UV light for precise light control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750L is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750L is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. The ICH750L model includes an advanced illumination box integrated into the upper interior, equipped with fluorescent lamps providing cold white light (daylight: light color 865, 6,500 K) and UV radiation within the 320 to 400 nm spectral range. This setup replicates standard light D65, essential for tests that require precise light conditions. Both daylight and UV light can be individually programmed through the controller, offering tailored adjustment for specific testing needs. Light intensity is maintained with high accuracy, at ± 6% for cold white light and ± 10% for UV light, ensuring consistent conditions for reliable test results. INCLUDED: TheMemmert ICH750L Stability Climate Chamber w/ Light 749L, 115V includes: - Illumination Box - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. Models with PTFE-coated collectors that can withstand corrosive compounds are available. Features Upright stainOptional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty