SLS Galaxy S 200 Incubator Lab

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and heats, but does not cool or shake. It is sold for spares/repairs.

Memmert IN750 Natural Convection Incubator 749L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 749 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Large 749 L (26.5 cu.ft.) capacity for versatile applications - High-precision control with 0.1 °C resolution and 1 Pt100 sensor DIN class A - SingleDISPLAY ControlCOCKPIT with adaptive PID-microprocessor controller and high-definition TFT display - SetpointWAIT function ensures process timing starts once set temperature is reached - Inner glass doors with fully insulated stainless steel doors and 2-point compression lock - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on all sides The Memmert IN750 Natural Convection Incubator 749L, 115V provides an expansive 749 L (26.5 cu.ft.) chamber, perfect for applications needing precise temperature regulation. Operating from +20°C to +80°C and capable of maintaining settings as low as 5°C above ambient, it features the user-friendly ControlCOCKPIT with SingleDISPLAY and high-definition TFT display for adjusting temperature (Celsius or Fahrenheit), air flap position, and timer. Its fully insulated stainless steel door includes an inner glass pane with a 2-point compression lock for visibility and safety. Natural convection and a pre-heated fresh air admixture ensure consistent chamber conditions, while AtmoCONTROL software enables efficient data management. Built for durability, it accommodates up to 14 shelves with a max load of 661 lbs, making it ideal for demanding lab settings. INCLUDED: The Memmert IN750 Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heraeus B12 incubator. Temperature range from ambient +5ºC to 70ºC. Heating time 40 min at 37 °C. 13 (more)1 L capacity. Natural convection. internal glass. Digital. Timer function to activate/deactivate the incubator. Stainless steel interior. Microprocessor control. 2 trays. Maximum load per shelf: 20 kg. Rear RS 232 port. External dimensions (LAF) 696*850*540mm; internal 552*610*390mm. weight 55 kilos User manual.emperature range from ambient +5ºC to 70ºC. Capacity 131 L. Natural convection. Internal glass. Digital. Microprocessor control. 2 trays. Manual. Features Specifications

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

CAE Healthcare METIman Patient Simulator Lab This item was removed from a university lab where it wa (more)s surplus to requirements. It is in good clean condition, due to the power supply not being included we are unable to test it. Operating System Support Minimum Requirements available on request. This item includes a MacBook with the operation manual on it. Unfortunately, it seems like the software was deleted before we received the system. This MacBook requires a plug-in connection to remain powered on, when the cable is removed it no longer powers on. *Examination bed not Included* No power leads supplied with the Item.

F.J. Edwards Sheet Metal Folder This item was removed from a university lab where it was surplus to  (more)requirements. The machine is in reasonable, used cosmetic condition with visible wear from previous use. It is mechanically sound. MC No.: C-4277Capacity: 3 FT-16.6 in mild steel (Skates not included)

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41222 Coherent Cube 405nmITEM-41220 2 x CEM-09A-II Monitors w/ cablesITEM-41368 Planner Products LTD Power Supply Box Model LNP4 PSUITEM-41369 Sanyo MSE Micro Centaur CentrifugeITEM-41370 Bio-Rad Model-1000/500 Power SupplyITEM-41371 Bio-Rad Power Pac 300ITEM-41372 Bio-Rad Power Pac 3000ITEM-37181 Fisherbrand FB 70155ITEM-37178 Biotek Valve ModuleITEM-41433 MSE MicroCentaur CentrifugeITEM-41381 Mover Link F01828ITEM-41382 Mini-Hub F01928ITEM-41384 StarTech ComITEM-41385 Bespoke ServerITEM-37184 Moxa NPort 5610-8 Device ServerITEM-37182 Dedotec Dedocool COOLITEM-40026 SMC AW20-N02H-CZ Pneumatic Regulator FilterITEM-40027 Thermo Fisher Ngs, Gripper Finger Assy V3ITEM-40028 Nikon Plan Fluor 100x/1.30 Oil DamagedITEM-40029 3 x Damaged ObjectivesITEM-41558 LabNet MultigeneITEM-41559 helena biosciences Phoenix model-FGEN05THITEM-41562 Grant W28 Lab Water Bath HeatingITEM-41563 Hybaid Mini Oven Mk 2ITEM-41442 Jedcod Auto Dosing Pump DP-2ITEM-41443 Hanna Instruments pH 209 pH MeterITEM-41446 Jena GmbH EBQ 100ITEM-39950 Coherent Innova I300CITEM-39951 Laser HoseITEM-24750 Bio-Rad Power Pac 3000 Electrophoresis Power Supply LabITEM-17790 Fisons MSE Micro Centaur Centrifuge / Microcentrifuge Lab Spares or RepairsITEM-16565 Consort E455 Microcomputer Electrophoresis Power Supply LabITEM-12464 Lot of 2x Cambridge Thermometers Lab EquipmentITEM-17642 MSE Sanyo Micro Centaur Centrifuge Microcentrifuge Lab Spares or RepairsITEM-24748 Fisher Scientific FB1000 Electrophoresis Power Supply LabITEM-18131 AIW Corp P-136-29-MSHA 18 AWG 6/C SOOW-A 105C 600V Cable (UL) Halogen LampITEM-16595 Watson-Marlow H.R. Flow - Inducer Type - MHRE Peristaltic Pump LabITEM-24737 Techne TC-3000x FTC3X/05 Thermal Cycler Lab Spares/RepairsITEM-16732 Volpi Intralux 150H Fiber Optic Light Source LabITEM-15978 HARTING Han Plug & Connector Cable (33 Feet) from Balzers UMS 630 UHV LabITEM-15977 HARTING Han Cable (35 Feet) with plug 31 Pin Female from Balzers UMS 630 UHV LabITEM-12678 Foxboro Temperature Gauge Centigrade Steam CalibrationITEM-17561 5 x Eti Ltd Superfast Thermapen Electric Thermometers LabITEM-13625 GMT PR Pat No 47774/68 MT3 Dead Centre with Flip-Over Pilot Drill for LatheITEM-17454 Integra Fireboy Plus Portable Safety Bunsen Burner LabITEM-15976 HARTING Han Cable with Connector 19 Feet from Balzers UMS 630 UHV LabITEM-17564 Hach Pocket Colorimeter II Chlorine Analysis System Lab Spares or RepairsITEM-15975 HARTING Han 20 Foot 42 Pin Plug & Connector Cable from Balzers UMS 630 UHV LabITEM-24999 Vickers Stereo MicroscopeITEM-25000 Vickers Stereo MicroscopeITEM-25001 Vickers Stereo MicroscopeITEM-24745 Nikon SMZ-1B Stereo Zoom Microscope LabITEM-17568 5 x Barton TC7 Storage Containers Tubs Size 7 H200 x W310 x L520mm

Memmert UN30plus Natural Convection Oven 32L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 32 L (1.1 cu. ft.) Features - 32L internal volume accommodates various sample sizes for lab versatility - TwinDISPLAY with dual high-definition TFT-color displays for precise control and monitoring - Temperature range from +20°C to +300°C with accuracy up to 99.9°C: 0.1, from 100°C: 0.5 - 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring and error prevention - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with electronically adjustable air flap for consistent temperature control - Digital timer adjustable from 1 minute to 99 days for flexibility in lab processes - AutoSAFETY with over- and undertemperature monitoring to ensure protection and safe operation The Memmert UN30plus Natural Convection Oven 32L, 115V is a versatile and precision-engineered solution for temperature control in laboratory and industrial settings. With a 32L internal volume, this oven provides ample space for a variety of sample sizes while maintaining a temperature range from +20°C to +300°C. The oven’s advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays, allows for precise monitoring and easy adjustments. Equipped with two Pt100 sensors in a 4-wire circuit, the UN30plus ensures consistent temperature accuracy, protecting your samples through mutual monitoring and error prevention. This oven also features natural convection for uniform heat distribution, ideal for delicate samples, along with a pre-heated fresh air admixture controlled by an adjustable air flap for optimal temperature stability. The digital timer, adjustable from 1 minute to 99 days, offers flexibility in various applications, while the AutoSAFETY system provides integrated over- and undertemperature protection for maximum safety. The easy-to-clean stainless steel interior, reinforced by ribbing, is corrosion-resistant, making the Memmert UN30plus both robust and reliable for continuous lab use. INCLUDED: TheMemmert UN30plus Natural Convection Oven 32L, 115V includes: - 1 x Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW