Selecta Prebatem

This listing is for a Monmouth Guardian MSC T1200 Class 2 Biological Safety Cabinet. The unit is in (more) full working condition and is ready for immediate release. The Monmouth Guardian MSC T1200 is a Class 2 Biological Safety Cabinet designed for microbiology and biotechnology applications. Here are some key features and specifications: Dimensions: Working Chamber: 741(h) x 1107(w) x 510(d)mm, Overall External: 1321(h) x 1200(w) x 750(d)mm Air Cleanliness: ISO Class 4 | H14 HEPA Filter – 99.97% efficient at 0.3um Motorised Sliding Sash: Allows for easy access and manipulation of samples UV Light: Included for additional disinfection and decontamination Power Consumption: 0.15kW Noise Level: 64dB when running

Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab This item was removed from a (more) university lab where it was surplus to requirements. The unit powers on and the fan, airflow, UV, white light, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 150cm Includes:-Manual-Stand for unit

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

This Envair Bio 2 Class 2 Microbiological Safety Cabinet was removed from a laboratory where it was  (more)surplus to requirements. The unit powers up and the airflow and light is working. The UV is not working. Cabinet dimensions - D70 W125 H139cmFrame dimensions - D61 W122 H83cmInternal workspace dimensions - D56 W106 H71cm The item is in a reasonable, used cosmetic condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The biohazard cabinet of the brand Clean air type EF/A6, equipped with a UV lamp, generates a steril (more)e airflow in the cabinet, keeping the material of the cabinet free of contamination and contamination (product protection). In addition, the downflow provides reasonable protection against cross-contamination while conducting experiments. The intake of air from the laboratory space ensures that an inwardly directed protective air curtain is formed at the front of the cabinet, which serves for personal protection. This biohazard cabinet is suitable, among other things, for culturing cells and for transfecting cells under sterile conditions. All in all, this biohazard cabinet is ideal for conducting experiments in which bacteria, viruses and micro-organisms are present. Technical specifications Downflow filter: 18P6+ Exhaust filter: 6P7 Pre-filter dimensions (ØxH): 445 x 1760 mm Exterior dimensions (WxDxH): 1900 x 835 x 2400 mm Inner dimensions (WxDxH): 1800 x 575 x 740 mm Weight: 315 kg

IKA ROTATEMP me-vi Viscometer Package Viscosity Measuring Range 40,000,000 mPas Speed Range 0.01 to  (more)200 rpm Time Setting Range 0.017 to 6000 min Features - The combination of ROTAVISC viscometer and ROTATEMP high-temperature system simplifies the viscosity measurement of difficult-to-measure, highly viscous samples. - The complete system is supplied ready for connection. With its space-saving design, it fits easily into any laboratory. - ROTAVISC and ROTATEMP are compatible with the labworldsoft ® laboratory software, which makes it easy to automate, control and document your measurement results. - Samples can reach 300°C in 16 minutes without overheating. The ROTATEMP me-vi Package is the ideal solution for precise and reliable viscosity measurement of difficult-to-measure, highly viscous samples. The package combines the ROTAVISC me-vi rotational viscometer with the ROTATEMP high-temperature system to ensure optimum temperature control during the measurement process. ROTAVISC me-vi is a high-performance rotational viscometer for applications in a measuring range from 100 to 40,000,000 mPas. The space-saving ROTATEMP high-temperature system is the perfect complement for measuring temperature-dependent samples that are not able to flow at room temperature, such as asphalt, bitumen, wax, polymers, candy base or hot melt adhesives. Thanks to precise and efficient temperature control, based on the proven IKA magnetic stirrer technology, samples can be heated up to 300 °C in just 16 minutes without overheating. This allows precise and reproducible measurements to be carried out. INCLUDED: The IKA ROTATEMP me-vi Viscometer Package includes: - ROTAVISC me-vi control S000 - ROTASTAND - ROTATEMP - SP set-2 - PT 100.8 - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

Polyscience 6260MXCRY10C-V Cryoprecipitate Bath (Variable setpoint 4 to 40°C), 120V, 60Hz3D Visualiz (more)ation of the Polyscience Cryoprecipitate BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The PolyScience Cryoprecipitate Bath is a self-contained, custom-designed Recirculating Chiller designed for the safe, reliable thawing of Fresh Frozen Plasma (FFP) for the recovery of Cryoprecipitated Antihemophilic Factor (AHF). It is capable of thawing up to 24 units of FFP or whole blood (WB) simultaneously. Features - 13.8 gallon (52.24 liter) reservoir - Removable, center-hinged reservoir cover - 4°C preset thawing temperature - Bright temperature and elapsed time displays - Calibration capability - Removable, high-efficiency fluid filter - Reservoir drain - Over-temperature and flow alarms INCLUDED: The Polyscience 6260MXCRY10C-V Cryoprecipitate Bath (Variable setpoint 4 to 40°C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

E2 class standards are synonymous with excellence in mass measurement. Their versatility and high pr (more)ecision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results. Product Features Highest class of accuracy Indispensable in metrology laboratories where the highest measurement precision is required. Cylindrical shape The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes 11 mass standards, 1 tweezer.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.