Scientific Industries Incubator-Genie SI-1403 Shaking Incubator Lab

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

This Thermo Scientific MaxQ 8000 Shaker Incubator Model:444 was removed from a university lab where  (more)it was surplus to requirements. It has been tested to shake & heat and is in full working order. This is not the refrigerated model. It is in good cosmetic condition with minor marks from use. It is fitted with 8 holders for 1000ml Flasks. The item is supplied with Operating & Maintenance Manual, 4 x Stacking Blocks & 8 x 1000ml Flasks. Internal Dimensions: L 85cm x W 46cm x H 30cm.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range A (more)mbient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V provides precise temperature control across a wide working range of 0°C (at least 20°C below ambient) to +70°C, making it ideal for various incubation applications. With a spacious 53-liter capacity, this incubator uses an energy-efficient Peltier heating and cooling system, featuring individually controlled upper and lower elements for optimal temperature uniformity. The advanced ControlCOCKPIT with TwinDISPLAY, coupled with an adaptive digital PID-microprocessor controller, enables intuitive operation and monitoring through high-definition TFT displays. The SetpointWAIT function ensures that process timing only begins once the set temperature is reached, providing additional accuracy. Constructed with a corrosion-resistant stainless steel interior and textured exterior, the IPP55plus is designed for durability and easy maintenance. Safety features include an over- and undertemperature monitor with AutoSAFETY protection, providing visual and acoustic alarms if limits are breached. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault analysis, and a maximum chamber load capacity of 176 lbs, make this incubator both versatile and reliable for demanding lab environments. INCLUDED: The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Excluding connection gas kit (see pictures for kit)

IKA PETTE MicroKit A Vario: 0.1-2 ul, 0.5-10 ul, 10-100 ul, Linea Stand, Tip xs box, Tip s box Desig (more)n Air Displacement Piston Operated Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MicroKit A Vario includes mechanical air-cushion pipettes with a variable volume range of 0.1-2 µl, 0.5-10 µl, and 10-100 µl. These pipettes feature fully automated calibration by robots and a volume-locking feature to prevent accidental volume changes. The large and clearly visible display, along with the ergonomic and lightweight design, ensures low pipetting and tip ejection forces, reducing strain and fatigue. Built with high-quality UV and chemical-resistant materials, these pipettes are durable, robust, and fully autoclavable for sterility and compliance with stringent laboratory standards. The kit includes a Linea Stand, Tip xs box, and Tip s box, offering maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance.INCLUDED: The IKA PETTE MicroKit A Vario: 0.1-2 ul, 0.5-10 ul, 10-100 ul, Linea Stand, Tip xs box, Tip s box includes: - IKA PETTE vario 0.1-2 µl - IKA PETTE vario 0.5-10 µl - IKA PETTE vario 10-100 µl - IKA Linea - Tip s box (96 tips) - Tip xs box (96 tips) - Two Year Manufacturer's Warranty

Eppendorf T-60-11 Fixed Angle Rotor Eppendorf T-60-11 Fixed Angle Rotor with Lid, never used, new in (more) box. The T-60-11 fixed angle rotor has a maximum speed of 14,000 rpm and a maximum RCF of 16,4000 x g. Holds 60 x 1.5/2ml. For use in Eppendorf 5804, 5804R, 5810, and 5810R centrifuges. INCLUDED: The Eppendorf T-60-11 Fixed Angle Rotor includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty

Increase your lab’s efficiency with the variable speed Thermo Scientific Tube Revolver / Rotator. A  (more)small footprint, flexible design and simple display help increase flexibility and effectiveness. Speed Range: 10 to 40 rpm Capacity combination of 4 paddles of: 7 x 10 to 15 mL tubes 7 x 5 to 7 mL tubes 15 x 1.5 to 2 mL tubes 21 x 0.5 to 0.8 mL tubes One paddle of 6 x 50 mL tubes Dimensions (LxWxH): 154 x 225 x 195 mm Weight: 1.2 kg Includes: Two 10/15 mL paddles Two 5/7 mL paddles Two 1.5/2 mL paddles Two 0.5/0.8 mL paddles One 50mL paddle Dimensions (HxDxW): 195 x 154 x 225 mm Weight: 1.2 kg

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg

The RediFrac fraction collector is a versatile instrument for simple, straightforward fraction colle (more)ction. In its standard form it will collect up to 95 fractions in 10 – 18 mm diameter tubes. It will also collect up to 175 fractions in 12 mm tubes and up to 45 fractions in 28 mm diamter vials, with help of simple accessories (not included). Fractions may be collected in different ways, based on either time or drop counting, controlled via simple programs specified by the operator. For example, you can choose to collect uniform fractions of a fixed time period. The RediFrac will collect fractions untill all tubes are used and then switch itself off. Alternatively, fractions may be collected by specifying the number of drops per tube. Safe collection is ensured by using drop synchrnisation combined with the unique tube sensor which means the instrument cannot collect into empty positions in the tube rack. The RediFrac is designed primarily as a stand-alone instrument but can also work with other equipement. Tube rack diameter range: 10 – 18 mm Tube rack height range: 50 – 180 mm Tube rack capacity: 95 Fraction sizes time: 0.01 – 99.99 min (0.01 min increments), 100 – 999.9 min (0.1 min increments), 1000 – 9999 min (1 min increments) Fraction sizes drops: 1 – 9999 drops (1 drop increments) Memory protection: Programmed parameters and stored data are guaranteed for at least 1 hour after the instrument is switched off or in event of a power failure. Under normal conditions at least 4 days storage can be expected. Event mark: 0.2 s Max flow rate: 15 drops/sec

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW