Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Heraeus BB 16 Function Line CO2 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks.

Nuaire 5800E C02 Incubator Lab This item was removed from a university where it was surplus to requi (more)rement. It is in good cosmetic condition and powers on. (Thermometer not included) The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

LMS 400NP Cooled Incubator This item was removed from a university where it was surplus to requireme (more)nt. The incubator is in excellent cosmetic condition and powers on.However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C. Therefore, it is listed as Spares/Repair. Specifications: - Serial No.: 12425/17PP - Capacity: 450 litres - Internal dimensions: 64 x 55 x 118 cm (l x w x h) - Temperature range: -10°C to 50°C - 4 height adjustable shelves (56 x 60 cm) - Factory set auto defrost system

This listing is for a Genlab MINI/50 Incubator. The unit is in full working condition and is ready  (more)for immidate realese. Enhance your laboratory's capabilities with the Genlab MINI/50 Incubator, a compact and efficient solution designed for a variety of applications in biological research, quality control, and education. This incubator ensures optimal temperature control and reliability, making it an essential tool for any laboratory setting. Key Features: Temperature Range: The MINI/50 offers a temperature range from 5°C to 70°C, allowing for precise environmental control suitable for diverse applications. Accurate Temperature Control: With a fluctuation of only ±0.25°C at 37°C, this incubator guarantees stable conditions for sensitive experiments and sample storage. User-Friendly Design: The intuitive control panel and clear digital display make it easy to set and monitor the desired temperature, ensuring hassle-free operation. Durable Construction: Built with a robust stainless steel chamber and a solid outer casing, the MINI/50 is designed for longevity and resistance to corrosion. Technical Specifications: Capacity: 50 liters, providing ample space for various samples. Dimensions: Internal height: 330mm Internal width: 490mm Internal depth: 330mm External height: 590mm External width: 610mm External depth: 470mm Power Supply: Operates efficiently with standard electrical requirements, ensuring energy savings. Benefits: Versatile Applications: Ideal for cell culture, microbiological studies, and enzyme reactions, the MINI/50 accommodates a wide range of laboratory needs. Enhanced Safety Features: Equipped with an over-temperature safety cut-out, ensuring the protection of your samples and experiments. Easy Maintenance: The smooth interior surfaces facilitate quick cleaning, helping maintain a sterile environment. The Genlab MINI/50 Incubator is the perfect choice for laboratories seeking a reliable, compact, and efficient incubator. Experience superior temperature control and enhance your research outcomes with this essential laboratory tool today!

Memmert IF110plus Forced Circulation Incubator 108L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 108 L (3.8 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF110plus Forced Circulation Incubator 108L, 115V offers a precise working temperature range starting from Min. 10°C above ambient up to +80°C with 0.1°C accuracy, ensuring optimal environmental conditions for laboratory processes. Its spacious 108 L (3.8 cu.ft.) stainless steel interior is designed for durability and ease of cleaning, making it ideal for routine use in demanding lab environments. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, equipped with two high-definition TFT-color displays, allows users to easily monitor and adjust key parameters like temperature, fan speed, and air flap position, all with intuitive control. For enhanced safety, the IF110plus features AutoSAFETY with integrated over- and undertemperature monitoring and a mechanical temperature limiter TB for additional protection. The Function SetpointWAIT ensures the process begins only once the desired temperature is reached, increasing precision. Additionally, the incubator includes a fixed sterilization program, which operates at 160°C for 4 hours to clean the chamber. With forced air circulation, adjustable in 10% steps, and the ability to manage fresh air admixture, this incubator is both efficient and reliable for various laboratory applications. INCLUDED: The Memmert IF110plus Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Laboport SD N 860.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automat (more)ic condensate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 60 l / min Final vacuum (max.) 4 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Texol Genysis NitroGenerator Nitrogen Generator This item was removed from a university lab where it (more) was surplus to requirements. The unit is in reasonably good cosmetic condition, with some stain marks on the top and side panels. It is mounted on four wheels and operates on a 24-volt power system, but no power adapter is supplied. When powered on, the front power light illuminated, and the programmer inside the front door displayed system information. No further testing could be carried out as the unit must be controlled by an external system. Power supply not included.

This Shimadzu RF-20A Prominence Fluorescence Detector was removed from a university lab where it was (more) surplus to requirements. The cosmetic condition of this item is good. The system powers up but we could not test it further at our facility. The item carried out all of its self-checks successfully on start-up.

Frame intended for 4-load-cell powder-coated scales C7, that are to be embedded in the ground.

Ohaus 30400153 Modular Heat Block, 12 x 15/16 mm Tubes The Ohaus 30400153 Modular Heat Block, 12 x 1 (more)5/16 mm Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400153 Modular Heat Block, 12 x 15/16 mm Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic Panthera E2 Trinocular Compound Microscope Manufactured to Withstand the Time With the new mic (more)roscope Series Panthera E2, your decision is distinct. This microscope series allows to experience Life Sciences in a new way, with the best possible learning effect. From now on, you achieve your teaching goals in the easiest way, with the highest precision and accuracy that meet all your intentions in mind. Even in a small lab with a small budget, these new technologies from Motic will convince you.Panthera E2 microscopes combine high-quality materials and precise engineering to a persistent and resilient construction. The smooth operation of the mechanics is self-evident for fast and reliable results, responsible for shifting your daily work in the classroom and lab to a higher level of quality. User-friendly design, robust for tough environments, and unique features grants the best performance. Models of this series convince positively in smooth operation and haptic.Robust Functionality for Demanding Environments Panthera E2 was developed by listening to your objectives in mind. Features like a reversed 4-fold nosepiece, a rackless X/Y-stage with a standard slide holder and an upper limit stop fulfill users' demands. The standard eyepiece tubes can be adjusted to accommodate different physiques. In addition, all tubes are rotatable. Together with a small footprint and compact design worries about small working places or storage problems are obsolete.Strong Optical Performance with Ultra Contrast Optics The Panthera E2 series is equipped with new Ultra Contrast (UC) Plan Achromatic objectives in a range from 4X to 100X magnification. These objectives together with neutral eyepieces guarantee the best performance in terms of color fidelity and contrast. A fully corrected intermediate image for digital access is granted. The optional 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure is considered too difficult and complicated.Efficiency and Energy Saving LED Illumination Setup The low consumption LED light source in a Fixed Koehler setup stands for a "cool" illumination with a long lifetime. An unbeatable key feature for outdoor activities: A USB port in the stand grants the functionality of the microscope independent from the mains by a power bank.Close to your Individual Applications Panthera E2 microscopes can be upgraded for different contrast methods: Phase contrast for unstained samples from botany, zoology, and medicine is a classic, Darkfield for impressive images from protozoa is on the verge of extinction, POL contrast for birefringent structures is an underrated method for biology and medicine. For plastics and foils from the industrial lab, this method is standard.Click Here to View Product Video INCLUDED: The Motic Panthera E2 Trinocular Compound Microscope includes: - 4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm) Objectives - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - 5 Year Manufacturer's Warranty