Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI Lab

This listing is for a Memmert Double Door Incubator. The unit is in full working condition and is r (more)eady for immediate release. The Memmert Double Door Incubator is a cutting-edge, high-precision incubator designed to meet the rigorous demands of microbiological laboratories, research facilities, and applications requiring controlled temperature environments. Its innovative double-door design offers optimal visibility and easy access while maintaining consistent internal conditions, preventing contamination and ensuring precise, reliable results. Key Features: Double Door Design: Fully insulated stainless steel doors ensure superior temperature control and easy access without heat loss or contamination risks. Advanced Temperature Control: Available with energy-efficient Peltier Technology or compressor-cooling systems for precise, uniform temperature regulation. Wide Temperature Range: Adjustable from 0°C to +70°C (or +80°C for select models), ideal for a variety of sensitive research and incubation applications. Optimum Temperature Distribution: Rapid energy transfer ensures uniform heat distribution and prevents condensation and sample drying. Quiet, Low-Vibration Operation: Designed for noise-sensitive environments, maintaining quiet and stable performance. User-Friendly Interface: Features Memmert’s intuitive ControlCOCKPIT with optional AtmoCONTROL software for easy programming, control, and monitoring. Benefits: The Memmert Double Door Incubator provides exceptional temperature accuracy, making it ideal for microbiology, cell culture, and other temperature-sensitive processes. Technical Specifications: Temperature Range: 0°C to +70°C (up to +80°C for some models) Construction: Stainless steel, fully insulated Controller: ControlCOCKPIT with optional AtmoCONTROL integration Operation: Energy-efficient Peltier or compressor-cooling systems Defrost Function: Available in select models Quiet Operation: Low-vibration performance

Vortem 1550 Shaking Incubator LABNET New equipment (never used) Complete with racks for 50 mL and 15 (more) mL tubes, 230V Temperature Range: Ambient +5° to 99°C Temperature Accuracy: ±0.5°C Speed Range: 200 to 900 rpm Motion, Orbit: Circular, 3mm Timer 1 to 99 min or continuous Capacity: 18 x 15 mL tubes or 8 x 50 mL tubes Dimensions: 10.2 x 12.2 x 12.2 in. (26 x 31 x 31 cm) Electrical: 230V~, 50 Hz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

This was removed from a university lab where it was surplus to requirements. Both incubators power u (more)p and have been tested at 5% CO2 and 37&amp;50˚C with a temperature and CO2 sensor (not included). They are both in working order. The incubators are in good cosmetic condition with only minor marks from use. Top:-Model - MCO-20AICSN - 01212236External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm1 Tray - 40 x 29 x 5cm Bottom:-Model - MCO-20AICSN - 60305034External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm

Memmert IF750plus Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications. Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments. INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

WTW OXI 3205 portable oximeter Without probe Waterproof dissolved oxygen measuring instrument Batter (more)y type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Stainless Steel Wire - set (1 mg - 500 mg) F2-class mass standards represent an impressive level of  (more)precision in mass measurement. Classified as metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 Class Mass Standards &ndash; Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. The set includes: wooden box 12 mass standards 1 pair of tweezers 1 brush Material: stainless steel Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

HX7 H scale&rsquo;s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today &ndash; that&rsquo;s the multifunctionality. That&rsquo;s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices &ndash; thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7&rsquo;s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.