Rocking shaker with incubator ISRK04HDG Ohaus

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37 ° C and -2 ° C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirements. The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation. It is in good cosmetic condition with minor marks from use. 3 Shelves - 52 x 42.5cm

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements. (more) The unit powers up and works, but the door mechanism is broken, and the door will not remain closed. It is sold for spares/repairs.

This Sanyo CO2 Laboratory Incubator MCO-17AIC was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in good working order, but will need to be calibrated upon installation. It is in good cosmetic condition with minor marks from use. The handle has come off, but this does not affect the operation of the unit. Item is supplied with 4 shelves. Internal dimensions are: L45cm x W45cm x H66cm.

Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V is a high-capacity, energy-efficient incubator designed for precision temperature control in demanding laboratory environments. With a spacious 384-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it offers flexibility for a wide range of incubation applications. The Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. Enhanced control is provided by the ControlCOCKPIT with TwinDISPLAY, which includes a multifunctional PID-microprocessor controller with dual high-definition TFT-color displays. For precise timing, the SetpointWAIT function ensures that the process only begins once the set temperature is achieved. This incubator prioritizes safety and durability with an AutoSAFETY system, which includes over- and undertemperature monitors and visual and acoustic alarms. Constructed with a stainless steel interior and a textured stainless steel exterior, it is resistant to corrosion and easy to clean. Supporting up to 14 shelves and a maximum chamber load of 440 lbs, the IPP410ecoplus provides ample space for various sample sizes and types. Additional features, such as three freely selectable calibration points, an autodiagnostic system, and AtmoCONTROL software for advanced programmability, make it an indispensable tool for labs focused on efficiency, reliability, and sustainability. INCLUDED: The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Thermo Scientific MaxQ 8000 Shaker Incubator Model:444 was removed from a university lab where  (more)it was surplus to requirements. It has been tested to shake & heat and is in full working order. This is not the refrigerated model. It is in good cosmetic condition with minor marks from use. It is fitted with 8 holders for 1000ml Flasks. The item is supplied with Operating & Maintenance Manual, 4 x Stacking Blocks & 8 x 1000ml Flasks. Internal Dimensions: L 85cm x W 46cm x H 30cm.

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).