PHCBI Cooled Incubator Model MIR-154-PE Lab

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested (thermometer not included).It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order. The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.Therefore, it is listed as Spares/Repair. Also includes; 2 x Power leads3 x Gas feed hoses1 x Data cable

This listing is for 1 of 2 DiaMed 37 SI ID-IncubatorsThe ID incubator of the DiaMed type 37SI is ide (more)al for bringing different samples in ID cards to a temperature of 37 °C.

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - Door with viewing window - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20 / 60 / 100 mm access door - Additional 30 mm access door - Castors - Table with castors

Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V Temperature Range 5 (more)°C to 60°C Temperature Distribution Accuracy ± 0.5°C Chamber Volume 286L Features - Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration - 44% power savings compared to previous models - Controller upgraded for easier viewing and operability - Temperature distribution accuracy improved for better incubation - Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO2 emission monitor Programmable, eco-friendly 286L refrigerated incubator. Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration. Controller upgraded for easier viewing and operability. Improved temperature distribution accuracy for better incubation. Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO₂ emission monitor. Operating temperature range 0~ + 60°C. INCLUDED: The Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V includes: - 5 x Shelves w/ Brackets - 2 Keys - Silicon Stopper for Cable Hole - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The New Brunswick Innova 4400 Incubator Shaker is a large-capacity environmental shaker that allows  (more)for uniform heating and motion and accurate regulation of shaking speed. This equilibration creates faster operation and allows enhanced productivity for laboratories with shaking requirements. Designed for handling greater quantities of flasks, the Innova 4400 easily holds 12 x 2 L flasks and accepts flasks up to 6 L. Temperature range: Ambient +5°C to 80°C Temperature accuracy: ±0.1°C (30°C – 40°C), ±0.5°C (for the rest) Speed range: 25 to 400 rpm Speed accuracy: ±1 rpm Orbit: 25 mm Platform: 457 x 762 mm Dimensions (WxDxH): 1270 x 838 x 686 mm| Weight: 222 kg

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. Graph of pump characteristics in Alpha Lauda models. Graph of heating curves of Aplha Lauda models. TECHNICAL VISUALIZATION a - Control head with clamp b - Bath vessel c - Four mounting feet 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp

Haake DC1 Clamp-On Immersion Heater Circulator For laboratory Operating temperature (The working tem (more)perature range is dependant on the cooling selected) : -30°C ... 100°C Température accuracy : 0.02 K 1000W 300 Mbar 17l/Min Immersion Depth 85 to 140mm 220V

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Ohaus Aquasearcher a-AB41PH-B pH Meter The OHAUS AQUASEARCHERTM AB41PH bench meter is designed with  (more)reliable measurement and precise performance in mind. The i-Steward ensures repeatable and consistent measurement accuracy for optimal peace of mind and can assist with compliance with 21 CFR Part 11 regulations.INCLUDED: The Ohaus Aquasearcher a-AB41PH-B pH Meter includes: - Power Cord - a-AB41PH Benchtop Meter - Stand-Alone Electrode Holder - Two Year Manufacturer's Warranty