Panasonic MIR-554-PE Cooled Incubator Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Nickel-Electro Clifton NE7-750S Incubator Lab This item was removed from a university where it was s (more)urplus to requirement. It is in excellent cosmetic condition and full working order. (Thermometer not included.) Specifications: - Model: NE7-750S - Serial No.: IW75BF160047 - Capacity: 750 litres - Temperature Range: 0–70°C - Features: Glass inner doors, 5 adjustable shelves (105 x 57 cm each)

Thermo Scientific MaxQ 4000 Analog Incubator Shaker This was removed from a university lab where it (more) was surplus to requirements. The unit would not power up and tripped the electrics during testing. We believe the motor controller is faulty. The gas struts for the lid have also failed. It is in otherwise good cosmetic condition with marks from use.

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab This item was removed from  (more)a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 3 x Shelves: 47 x 45 cm 1 x Humidity Water Tray: 44 x 25 x 7 cm

Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, (more) 115V Refrigerant R134A Operating Temperature Range Ambient +10-50°C Temperature Accuracy ±0.3°C Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention - Interior light for better sample visibility - Optional slide shaker table available to put in and take out samples easily Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Programmable. High accuracy temperature control and temperature distribution. Inner glass door keeps temperature stable during sample observation. Operating temperature range: -10~ + 50° CINCLUDED: The Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IF750 Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 749 L (26.5 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF750 Forced Circulation Incubator 749L, 115V offers an expansive 749 L (26.5 cu.ft.) volume, making it an excellent choice for large-scale laboratory operations. Its setting temperature range spans from +20°C to +80°C, with a working range starting at Min. 10°C above ambient. The incubator features a robust ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display, allowing for precise control over key parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time. Its easy-to-clean stainless steel interior is reinforced with deep drawn ribbing and integrated heating on four sides, ensuring durability and optimal heat distribution. Designed for safety and efficiency, the IF750 includes an adjustable overtemperature monitor and mechanical temperature limiter TB, in compliance with DIN 12880 standards. The forced air circulation system, driven by a quiet air turbine, is adjustable in 10% increments, ensuring even airflow and precise temperature control. With space for up to 14 shelves and a maximum chamber load of 661 lbs, this incubator is suitable for high-capacity workloads. Additional features like AtmoCONTROL software, a fully insulated stainless steel door with inner glass, and autodiagnostic systems make the IF750 a powerful tool for any lab environment. INCLUDED: The Memmert IF750 Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Mobile retention tank DENIOS PolySafe FSR 6.2 made of polyethylene (PE) Retention trolley External d (more)imensions (W x D x H): 795 x 645 x 315 mm Collection (retention) volume: 60 litres Storage capacity: Small containers up to 60 litres Total load: 120 kg With metal grating On 4 castors

MEMMERT UN 110 drying oven with forced convection 300°C Equipment never used, decommissioned In its  (more)original packaging. Year of manufacture: 2024 Model: UN110 drying oven / incubator - new generation Capacity: 108 liters Temperature range: Ambient +10°C / +300°C Integrated digital temperature display 2 stainless steel shelves Power supply: 230 V Frequency: 50-60 Hz Power: 2800 W External dimensions (W) x (D) x (H): 745 x 584(+56) x 864 mm Internal dimensions (W) x (D) x (H): 560 x 400 x 480 mm Weight: 74 kg SingleDISPLAY

Binder CB 150 CO2 Incubator This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition. This item does not power on, therefore it is sold as Spares or Repairs.

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

Highest Precision The E1 class mass standard of 50 g is a cylindrical standard with the highest prec (more)ision, designed for applications requiring accurate measurements. Made of high-quality materials to ensure stability and measurement accuracy. Ideal for laboratories, research centers, and anywhere precision weighing is needed.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).