New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair NOTE - THIS IS A SPARES/REPAIRS ITEM

Genlab Model LCI/12V/PDIG Lab Incubator This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is in good working order. (Digital thermometer not included) 3 Shelves - 60 x 60cm

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

LED illuminated shelves Homogeneous illumination and constant temperature ensure the same conditions (more) between the different samples, on the entire shelf. FOC 200IL is ideal for a wide variety of applications including plant growth, seed germination, cultivation, insect and small animal husbandry, cultured bacteria and fermentation studies FOC200IL is equipped with 2 illuminated shelves each consisting of six LED bars mounted horizontally in the lower part, so as to illuminate the shelf below. It is also equipped with a timer for the lights. Thermoregulation and thermal stability at their best - The Auto-Tuning thermoregulation system guarantees excellent thermal homogeneity and stability (± 0.5°C) - Ecological cooling system and low operating costs - Selectable incubation temperature and working range from 3°C to 50°C - Uniform temperature thanks to VELP ventilation technology - 3-digit DIGITAL DISPLAY, resolution 0.1°C - Transparent internal door for observation of the sample without temperature alterations - Customizable lighting cycle timer - Equipped with 2 illuminated shelves (30,000 lux / shelf), each with six LED bars mounted horizontally under the shelf - Volume of 169 liters net - Internal sockets to power devices - Intuitive digital interface, with three buttons for easy setup of the instrument - Constant monitoring according to GLP (Good Laboratory Practice) - Adjustable recording time (in case of connection to VELP Ermes and TempSoft ™) - The optional TempSoft ™ incorporates high / low alarm thresholds - Quick and easy calibration - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with Good Laboratory Practice (GLP)

Memmert IN30 Natural Convection Incubator 32L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 32 L Features - 32 L (1 cu.ft.) stainless steel chamber for compact sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit ensures precise monitoring - ControlCOCKPIT with SingleDISPLAY, featuring an adaptive digital PID-microprocessor controller with high-definition TFT display - Natural convection system for consistent temperature distribution - Electronically adjustable air flap for pre-heated fresh air admixture - Max chamber load of 132 lbs for high-capacity sample handling - Autodiagnostic system with adjustable overtemperature monitor for added safety The Memmert IN30 Natural Convection Incubator 32L, 115V is a reliable, compact solution for precise temperature control in laboratory applications. With a 32 L (1 cu.ft.) stainless steel chamber, this incubator is designed to handle diverse sample needs within a temperature range from at least 5°C above ambient to +80°C. Equipped with a highly accurate Pt100 sensor DIN class A in a 4-wire circuit and the ControlCOCKPIT SingleDISPLAY digital PID-microprocessor, adjustments are easily managed on its high-definition TFT display. The natural convection system ensures uniform temperature distribution throughout the chamber, while an electronically adjustable air flap allows pre-heated fresh air flow. The incubator supports a maximum chamber load of 132 lbs and incorporates an autodiagnostic system with adjustable overtemperature monitoring for dependable performance and safety. INCLUDED: The Memmert IN30 Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA KS 4000ic Incubator Shaker Type of Movement Orbital Temperature Setting Range 12°C - 80 °C Speed (more) Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly The IKA KS 4000ic Incubator Shaker combines precise control and user-friendly features, ideal for laboratory applications. It features a large LED display for speed and time settings, antimicrobial-coated controls, and integrated PID temperature control with dual PT 1000 sensors. The electronic timer switch allows settings from 0 to 999 hours, while the unit includes options for an external cooling connection. Safety mechanisms, such as automatic shutoff when disturbed or hood lifted, ensure reliable operation. With a permissible shaking weight of 20 kg, a speed range of 10-500 rpm, and a temperature range from 12°C to 80°C, this shaker provides optimal performance for your lab needs.

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

Thermo Scientific Fresco 21 Refrigerated Benchtop Centrifuge This item was removed from a university (more) laboratory where it was surplus to requirements. The centrifuge is in very good used cosmetic condition, showing signs of general use.It powers on and operates as expected, with temperatures tested successfully. Testing Details:- Tested at -9ºC and 37ºC, both of which were achieved in a reasonable amount of time. - Motor spindle has been greased for optimal performance. Specifications:- Model: Fresco 21 - Manufacture Date: 2009 Includes:- User Manual

Scilogex SK-O180-Pro Orbital LCD Digital ShakerThe Scilogex SK-O180-Pro Orbital LCD Digital Shaker f (more)eatures a backlit LCD display for speed and timer, maximum shaking weight of 5.5lbs, 100-800 rpm shaking speed range, and timer or continuous operation. Click Here to View Product Video INCLUDED: The Scilogex SK-O180-Pro Orbital LCD Digital Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Ultimate 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads Accu (more)rate dosing is particularly important in the pharmaceutical, cosmetic or food sector. Comprehensible process conditions are a prerequisite for the safe conveyance of sensitive media. This is ensured by a control accuracy of ±1% and precise speed adjustment (5 — 120 rpm).In addition, an optional foot switch allows the pump to be operated in closed exhaust hoods. The parameters - speed, direction of rotation and on/off function - can be controlled externally either through the analog or digital interface.In this model, you can choose between a single-channel or multichannel pump head. Flow rates vary depending on the pump head: the single-channel head has a flow rate of 0.38 — 813 ml/min; for the multi-channel head 0.005 — 364 ml/min. Depending on the focus of the process, the following parameters can be set on the device: Speed, tubing diameter, flow rate display, metering volume, interval dosing and break times. The pump can be calibrated for optimum dosing results. Features: - Increase your throughput by running up to 12 individual cassettes on one single pump drive and pump head system - Separate metering into multiple vessels with different feed rates in a single operation by using different tubing dimensions to adjust flow rate - Save time: tubing change is done in just seconds - In addition to standard pump heads which feature a 4-roller system you can choose 8-roller pump heads for low pulsation - Change your cassettes easily, even during operation – there are no restrictions - Cassette adjustments and changes are simple, just click in place - No additional purchase of a pump drive needed: upgrade your single-channel pump drive with just one adaptor for multi-channel use and pick the head/cassette configuration that matches your application needs Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Ultimate 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads includes: - Ultimate 120 Peristaltic Pump - Adaptor for Multi-Channel Pump Heads - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Hersteller: UNCHAINED LABS Modell: pUNk Beschreibung: Das pUNk gibt der dynamischen Lichtstreuung (D (more)LS) einen neuen Dreh. Mit ihm können Sie die hydrodynamische Größe, die Größenverteilung und die Aggregatpopulation eines Proteins viel schneller und mit weniger Aufwand erfassen. Wenn Sie Wert auf eine hohe Empfindlichkeit legen, können Sie diese mit dem einzigartigen optischen Design des pUNk abhaken. Erledigen Sie mehr mit dem kleinsten, schnellsten und benutzerfreundlichsten System zur Bestimmung von Proteingrößen. Kernmerkmale: - 5 µL Probengröße - Prozentuale Aggregation - Protein-Größe - Polydispersität - HPLC-kompatibel Sonstige Daten: Molekulargewichtsbereich: 192 Da (z.B. Koffein) - 25 MDa Polydispersität: <0,1 (zertifizierter Standard) Minimale Probenkonzentration: 0,1 mg/ml Lysozym in Phosphatpuffer (1,9 nm Radius), für größere Partikel ist eine viel geringere Konzentration erforderlich Volumen der Probenflüssigkeit (min - max): 2 µL (12 µL-Quarzküvette) - 45 µL (45 µL-Quarzküvette) Probenküvettentypen (typisch): - rUNt, 5 µL Polycarbonat Einweg - Allgemeine 12,5-mm-Küvetten mit quadratischer Wand, 4 klare Fenster - 8 µL Durchflussküvette - 12 µL oder 45 µL Quarz - 50 µL Polystyrol Einweg Messzeit (typisch): 30 Sekunden Bereich der Temperaturkontrolle: 0-90 °C Genauigkeit der Temperaturregelung: ±0,2 °C Lichtquelle: 660 nm Laserdiode Detektor-Typ: Fotodioden-Modul Umgebungsbedingungen: Temperaturbereich: 10-40 °C Luftfeuchtigkeitskontrolle: Luftfeuchtigkeit: 10-90% 4 mm Trockengaseinlass verfügbar Abmessungen: 13 cm B x 34 cm T x 21 cm H, 6,5 kg Elektrisch: Universaleingang, Spannung 100-240 V AC, 50-60 Hz Computer-Betriebssystem: Microsoft Windows XP oder 7 (32 oder 64 Bit) Computer-Kommunikation: 1 USB-Anschluss Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.