New Brunswick Innova 40 Shaking Incubator

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

This LMS Cooled Benchtop Laboratory Incubator was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested with a digital thermometer (not included) The dial was set to the minimum of 0 and it dropped as low as -6˚c after running for a few hours.When the dial was set to maximum, the thermometer read 42.7°c after running for around 6 hours. The item is in a reasonable, used cosmetic condition with some minor marks from use. Internal dimensions - D33 W45 H53cm

LEEC Compact Incubator Model-K2N Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition internally and externally.

Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V Temperature Range Ambi (more)ent +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 159L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 159L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IN110 Natural Convection Incubator 108L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) capacity for ample sample accommodation - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for both set point and actual temperature values - Adjustable parameters including temperature (Celsius/Fahrenheit), air flap position, program time, and daylight savings - SetpointWAIT function ensures process time begins only once the set temperature is reached - AtmoCONTROL software allows for data management and program organization via Ethernet - Inner glass door allows for easy sample monitoring without disrupting the internal environment - Autodiagnostic system and adjustable overtemperature monitor for enhanced safety The Memmert IN110 Natural Convection Incubator 108L, 115V is designed for precise and reliable sample incubation in low-temperature applications. With a spacious 108 L (3.8 cu.ft.) capacity, this unit accommodates a wide range of samples and ensures consistent temperature control from at least 5°C above ambient up to +80°C. The high-resolution display provides 0.1°C accuracy for both set points and actual values, allowing precise adjustments. Its adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing, with a SetpointWAIT function that begins processing only once the set temperature is reached. Enhanced with AtmoCONTROL software for data management, a durable stainless steel interior, and an autodiagnostic system with overtemperature monitoring, this incubator combines efficiency, safety, and ease of use. INCLUDED: The Memmert IN110 Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

Hermle Z327-K Centrifuge Blood Tube Bundle w/ swing out rotor for 10/15ml and 1.8/7ml tubes, 115V Sp (more)eed Range 200 to 18,000 RPM Max Capacity 4 x 200ml Max. RCF 23,542 x g Features - 120 V / 50-60Hz - Speed Range: 200 to 18,000 rpm - Max. RCF: 23,542 xg - Max. Capacity: 4 x 200 ml - Timer: up to 99 hr., 59min and continuous - Swing out rotors accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml) - Swing out plate rotor accepts deepwell plates - Extremely versatile, 17 rotor options - High speed rotors (up to 23,542 xg) Introducing the Hermle Z327-K Centrifuge Blood Tube Bundle, the ultimate solution for processing blood samples in clinical laboratories and blood banks. This bundle includes a swing out rotor that can accommodate 10/15ml and 1.8/7ml tubes, providing versatility for different blood collection tubes. With a voltage of 120 V / 50-60Hz, this centrifuge is highly efficient and reliable, ensuring consistent and accurate results. Its speed range of 200 to 18,000 rpm and a maximum RCF of 23,542 xg allows for quick and efficient separation of blood components, making it a valuable asset for any laboratory setting. The Hermle Z327-K Centrifuge Blood Tube Bundle features an advanced timer that can be set up to 99 hr., 59min, and continuous operation, providing enhanced control and precision during operation. With its swing out rotors capable of accepting up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml), and a swing-out plate rotor that accepts deepwell plates, this centrifuge offers unmatched versatility with 17 rotor options to choose from. Safety and convenience are also at the forefront of this bundle's design, with an advanced safety mechanism that ensures the rotor stays locked during operation, minimizing the risk of accidents. Its compact and lightweight design makes it easy to use and transport, while its intuitive controls and digital display allow for easy operation and monitoring. In summary, the Hermle Z327-K Centrifuge Blood Tube Bundle is an essential tool for any clinical laboratory or blood bank that demands high-quality and reliable results. Its advanced features and comprehensive package offer unmatched efficiency, precision, and convenience in blood sample preparation and separation. INCLUDED: The Hermle Z327-K Centrifuge Blood Tube Bundle w/ swing out rotor for 10/15ml and 1.8/7ml tubes, 115V includes: - Refrigerated Centrifuge (120V) - 4 x 200 ml swing out rotor - 4 x 200ml round bucket for Z327-200-AC - 7 x 10/15ml round insert for Z327-200-BUK (2 pack) - 8 x 1.8-7ml blood tube insert for Z327-200-BUK (2 pack) - 5 Year Manufacturer's Warranty

Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 The Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 ar (more)e for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 4 x 50ml conical bottom tubes each with the maximum tube dimensions (Diameter x Height) of 31mm x 120mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor

Accuris F1008 Smart-Q 800 Quantitative Fluorometer Measurement Speed ≤ 6 seconds Excitation Waveleng (more)ths Blue: 460 ± 20nm and Red: 625 ± 20nm Emission Wavelengths Green: 525 – 570nm and Red: 670 – 725nm Features - Sensitive quantitation down to 0.1pg/ul ds DNA - Large color touch screen for programming and operation - Two models for single or 8-sample processing - Built-in reagent calculators for sample preparation - Compact and portable (11 x 6 inch footprint) The Accuris Smart-Q 100 and Smart-Q 800 Quantitative Fluorometers are designed for the precise quantification of DNA, RNA, and protein samples. By utilizing well-established methodologies for fluorescence detection, the Smart-Q Fluorometers provide higher specificity and enhanced accuracy compared to the traditional method of UV-absorbance detection. Accurate results are particularly crucial in workflows involving: Next Generation Sequencing, PCR, Transfection, Western blotting, and Immunoassays. The Smart-Q Fluorometers are engineered to achieve optimal performance with Accuris’ Fluorescent DNA Quantification Kits and assay tubes; however, they also maintain compatibility with a range of kits offered by various other suppliers. Each instrument is equipped with a 7-inch color touchscreen, featuring an intuitive, icon-driven user interface. Preprogrammed protocols allow for quick & effortless assay set-up. Results are quickly calculated and displayed in less than 6 seconds and saved to the instrument’s internal memory. All data can also be exported easily to a PC using a USB flash drive. The Smart-Q Fluorometers, along with their accompanying assay kits, are engineered for the precise measurement of fluorescent dye signals that are bound to targeted biological molecules. These specially formulated dyes exhibit selective affinity towards DNA, RNA, or proteins, and generate fluorescent signals exclusively upon binding to their respective targets. Both Smart-Q models include Blue and Red channels that allow for various fluorescent dyes to be used in nucleic acid and protein measurements. The Smart-Q Fluorometers incorporate advanced curve-fitting algorithms to establish calibration curves from standard samples of known concentrations. The concentration of an unknown sample, whether it be DNA, RNA, or protein, is determined by correlating its Relative Fluorescence Units (RFUs) with those of the standards employed during calibration. The measurement sensitivity for each type of assay is distinct and defined by its detection limits. INCLUDED: The Accuris F1008 Smart-Q 800 Quantitative Fluorometer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty