New Brunswick Galaxy 170S CO₂ Incubator

Universal oven / incubator MEMMERT UF55 / 300 °C NEW New equipment, in the original box. Max tempera (more)ture 300°C Temperature range: Ambient + 5°C -> 300°C With forced convection Capacity: 53 Liters 1 stainless steel grid Interior dimensions: 400 x 400 x 330 mm (LxHxD) External dimensions: 585 x 784 x 514 mm (WxHxD) 2000W / 220V Weight: 57 kg

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Technical Specifications - ISWV02HDG - Uniformity: ±0.5 to 37°C - Drive system: stepper motor - Safety Certification: CE; TUV - Speed ​​Accuracy: ±1 rpm - Timer: 1 second to 160 hours Not sure which agitator to choose? Download the Incubator Shaker Selection Guide to get a quick overview of all available models.

Including Three-Tier Cell Roller Base Capacity : 821.2L Cabinet Material: Cold-rolled steel, powder- (more)coated cabinet Shelves: 6 supplied  (19 max.) Temperature ramp and soak, up to 24 steps Temperature Range: 0° to 60°C Temperature Resolution: 0.1°C Temperature Uniformity: ±0.3 at 25° to 37°C Temperature Sensor: RTD Temperature Accuracy: ±0.1 at 25° to 37°C Compressor: 1/4hp, air-cooled Relative humidity control via steam generator from above ambient to 95% at 37°C Heat Output: 1750W (6000 BTU/hr.) at 220V Adjustable defrost timer; factory set for two 15-min. defrost cycles/24 hr. Refrigerant: CFC-free, R134A Certifications/Compliance: ICH, FDA, TAPPI, ASTM™ Dimensions (d x w x h): 782mm x 1011mm x 2034mm Dimensions Internal (d x w x h): 686mm x 787mm x 1524mm 220V / 50Hz Three-Tier Cell Roller Base (15 positions) Dimensions (d x w x h): 620mm x 757mm x 706mm 220-240V / 50-60Hz

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks.

Memmert IF30 Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 32 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides - Max. loading capacity of chamber is 132 lbs, with each shelf supporting up to 44 lbs The Memmert IF30 Forced Circulation Incubator 32L, 115V is designed to deliver precise temperature control and uniform heating for a wide range of laboratory applications. With a setting temperature range from +20°C to +80°C and a working temperature range starting at 10°C above ambient, this incubator ensures reliable thermal processing. The 32L (1.1 cu.ft.) chamber, crafted from durable stainless steel with deep-drawn ribbing, is reinforced for easy cleaning and long-lasting durability. Equipped with the advanced ControlCOCKPIT, a multifunctional digital PID-microprocessor controller featuring a high-definition TFT-color display, users can easily adjust key parameters like temperature, fan speed, air flap position, and program time. To enhance operational efficiency, the IF30 incubator features forced air circulation by a quiet air turbine, adjustable in 10% increments, with an option for pre-heated fresh air admixture. Safety is prioritized through an adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880. Additionally, the incubator’s maximum chamber load is 132 lbs, with each shelf capable of supporting up to 44 lbs, making it a robust and dependable choice for precise temperature-controlled applications. INCLUDED: TheMemmert IF30 Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Speed range: 100 – 1400 rpm Max. stirring capacity (H₂O): 20 L Plate dimensions: Ø 145 mm Dimensions (more) (WxDxH): 173 x 277 x 94 mm Weight: 2.6kg

Waters 2525 Binary Gradient Module This item was removed from a university lab where it was surplus  (more)to requirements. The module powers on but cannot be testing further at our facility. The previous client has stated it is not in working order. They were unable to elaborate further on the fault. Therefore, it is listed as Spares/Repair. Model: 2525Serial No.: G03APP 330M

Glas-Col Unit Pulse Platform Incubator This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and has been tested with a digital thermometer (not included). Ran at full RPM(1200) with no issue. It is in good cosmetic condition internally and externally.

Balance of the AS X2 PLUS series is an advanced analytical weighing device of the SYNERGY LAB line.  (more)The AS X2 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X2 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 5” diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X2 PLUS analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X2 PLUS balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called „human factor”. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X2 PLUS balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user's permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X2 PLUS balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: • Operators (max 100 entries), • Products (max 5 000 entries), • Weighings (max 50 000 entries), • Packaging (max 100 entries) • Formulations (max 100 entries), • Customers (max 1000 entries), • ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X2 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS PLUS balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.