Memmert IN160 Natural Convection Incubator 161L, 115V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Binder CB 150 CO2 Incubator This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition. This item does not power on, therefore it is sold as Spares or Repairs.

Kendro HERAcell 150 CO2 Incubator This system was removed from a university lab where it was surplus (more) to requirements. The unit is in good working order and has been CO2 tested. It is in good cosmetic condition.

Faithful HWS Series constant temperature and humidity incubators. Volume: 70 L (HWS-70B), 150 L (HW (more)S-150B) and 250 L (HWS-250B). Forced ventilation. Temperature range: with humidity 10 to 65 ∫ C; humidity 0 to 65ºC. Resolution 0.1 ºC. Stability: high temperature ± 0.5 ºC; low-temperature ± 1ºC. Uniformity ± 1ºC. Humidifier ultrasonic manual. Range humidity 45% - 95%. Stability humidity ± 5% RH. Stainless steel. Antiescarcha. Control automatic humidity/temperature. Timer 0-99,9 h/cycle. Control over temperature. Automatic recovery after cutting. Interior light. Not CFC. Optional: sterilization by UV light, printer, RS485, alarm, SMS, wireless, USB, data storage, touch screen. The price shown is for the model 70 L (HWS-70B). For other models, use the drop-down.

Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range A (more)mbient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V provides precise temperature control across a wide working range of 0°C (at least 20°C below ambient) to +70°C, making it ideal for various incubation applications. With a spacious 53-liter capacity, this incubator uses an energy-efficient Peltier heating and cooling system, featuring individually controlled upper and lower elements for optimal temperature uniformity. The advanced ControlCOCKPIT with TwinDISPLAY, coupled with an adaptive digital PID-microprocessor controller, enables intuitive operation and monitoring through high-definition TFT displays. The SetpointWAIT function ensures that process timing only begins once the set temperature is reached, providing additional accuracy. Constructed with a corrosion-resistant stainless steel interior and textured exterior, the IPP55plus is designed for durability and easy maintenance. Safety features include an over- and undertemperature monitor with AutoSAFETY protection, providing visual and acoustic alarms if limits are breached. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault analysis, and a maximum chamber load capacity of 176 lbs, make this incubator both versatile and reliable for demanding lab environments. INCLUDED: The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The device has 4 digestion places (suitable for 4 digestion glasses size (48 x 260 mm) – arranged in (more) a row – and is equipped with special infinitely adjustable (scale 1 – 10 or power controller 0 – 100%) infrared heating dome with high heating output, which ensures a quick and complete ashing of the product material.

IKA C 6000 Automated Calorimeter Isoperibol Package 1/10 Measuring Range Max. 40000 J Reproducibilit (more)y Dynamic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition energy determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates The IKA C 6000 Automated Calorimeter Isoperibol Package 1/10 is a cutting-edge solution for precise calorimetric analysis, integrating advanced automation and compliance with global standards. Designed to operate in both isoperibolic and dynamic modes, this system offers unmatched adaptability for diverse laboratory needs. With selectable starting temperatures of 22°C, 25°C, or 30°C, the calorimeter supports a range of testing scenarios while enhancing efficiency through its redesigned decomposition vessel, which reduces measurement times and simplifies sample preparation. This package provides fully automated processes, including ignition, water filling, and oxygen handling, along with RFID technology for automatic decomposition vessel identification. The intuitive capacitive touchscreen enables seamless operation, while built-in control chart views and correction calculations ensure adherence to DIN, ISO, ASTM, GOST, and GB standards. With a reproducibility of 0.05% RSD in isoperibolic mode and 0.15% RSD in dynamic mode, the C 6000 ensures highly accurate and repeatable results. Equipped for modern laboratory workflows, the system features extensive connectivity options, including Ethernet, USB, and RS232 interfaces for streamlined data management. The IKA C 6000 Isoperibol Package 1/10 includes the C 6010 decomposition vessel and the RC 2 Basic Chiller, ensuring precise temperature control for optimal performance. This comprehensive package is an ideal choice for laboratories seeking a reliable, efficient, and standards-compliant calorimetric solution. INCLUDED: The IKA C 6000 Automated Calorimeter Isoperibol Package 1/10 includes: - C 6010 Decomposition Vessel, Standard - RC 2 Basic Circulating Chiller - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Singer Instruments MSM System This item was removed from a university lab where it was surplus to re (more)quirements. The model on the specification plate reads as 300, but the screen indicates a 400 model upon powering up. We believe it was upgraded at some point. The system appears to be in working condition, with the motorized stage operating via the joystick and communicating with the touchscreen monitor/computer. The camera and light are functional, allowing a clear view of the testing slide on the screen. The item is in good condition overall, with the exception of a bent piece on the right-hand side (see photo). Included:- Camera: Pixelink PL-B741U - 2 x Eye Pieces: HKW 15x/13 - 2 x Objectives: M20/0.30 240 & 4/0.10 - All necessary cables, including PSU for the monitor

Ohaus i-D33XW75C1R5 AM Defender 3000 Washdown Bench Scale, 150 lb., 0.02 lb. Maximum Capacity 150 lb (more) (75 kg) Readability 0.02 lb (10 g) Platform Size 14 in x 12 in (355 mm x 305 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord or rechargeable battery - Standard RS232 and optional USB device or ethernet - 304-grade stainless steel platform and frame, stainless steel IP66 indicator, IP67 load cell, non-slip adjustable rubber feet - 150% overload protection - 2 Year Manufacturer's Warranty

IKA KS 260 Control NOL Shaker Type of Movement Orbital Speed Range 0 to 500 RPM Shaking Stroke 10 m (more)m Features - Electronic adjustment of speed and timer - Digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59 min orcontinuous operation (endless) - All functions can be controlled and documented withlabworldsoft® - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included, please order separately The IKA KS 260 Control NOL Shaker is a compact, flat shaker designed for optimal swivel motion, capable of handling a maximum shaking weight of 7.5 kg. It features electronic adjustment of speed and timer, with a digital display that allows easy reading of speed, timer function, and operating modes. The electronic time switching clock supports durations from 0 to 9 hours and 59 minutes or continuous operation. All functions can be controlled and documented with labworldsoft®. The shaker supports a wide range of attachment combinations, making it versatile for almost all vessel shapes and sizes (attachments sold separately). With an orbital movement and a shaking stroke of 10 mm, it operates at speeds from 0 to 500 rpm, displayed on an LCD. The device dimensions are 360 x 98 x 420 mm, and it weighs 8.8 kg, making it a reliable and efficient choice for laboratory applications.

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty