Memmert IF450 Forced Circulation Incubator 449L, 115V

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  plexiglass windows o the door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard!     Inner chamber in aluminum for better heat transport.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The New Brunswick Innova 4400 Incubator Shaker is a large-capacity environmental shaker that allows  (more)for uniform heating and motion and accurate regulation of shaking speed. This equilibration creates faster operation and allows enhanced productivity for laboratories with shaking requirements. Designed for handling greater quantities of flasks, the Innova 4400 easily holds 12 x 2 L flasks and accepts flasks up to 6 L. Temperature range: Ambient +5°C to 80°C Temperature accuracy: ±0.1°C (30°C – 40°C), ±0.5°C (for the rest) Speed range: 25 to 400 rpm Speed accuracy: ±1 rpm Orbit: 25 mm Platform: 457 x 762 mm Dimensions (WxDxH): 1270 x 838 x 686 mm| Weight: 222 kg

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirements. The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation. It is in good cosmetic condition with minor marks from use. 3 Shelves - 52 x 42.5cm

VWR 1927 Reach-In Dry C02 Incubator This was removed from a university lab where it was surplus to r (more)equirement. The unit initially powered up and worked to 35˚C only, but now will not power up due to a faulty switch. The top panel is missing. It is sold for spares/repairs

RS Biotech Galaxy R+ Incubator Lab This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up and has been tested with a digital thermometer (not included).We were unable to set the temperature to the MAX due to it having a faulty display, therefore it is listed as Spares/Repair. It is in reasonably good cosmetic condition, although the motor at the back of the incubator is producing a continuous buzzing sound and the screen is very dark, which may indicate a faulty backlight. This item also includes the following: 9 x Metal containers with glass lids and bases.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

XA11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA microbalance. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 11 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than &frac14; of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 &micro;l &le; V &lt; 20 &micro;l 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 &micro;l &le; V &lt; 200 &micro;l 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 &micro;l &le; V &le; 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 &micro;l only if the expanded uncertainty in use is less than &frac14; of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 &micro;l, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than &frac14; of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Ohaus SHEX1619DG Extreme ShakerThe OhausSHEX1619DG Extreme Environment Orbital Shaker is designed fo (more)r a wide range ofapplications including cell cultures that require CO2 and humidity for optimalcell growth. The microprocessor control provides consistent uniform shakingwhile safely ramping to the set speed. Ideal forapplications that require CO2 and humidity for optimal cell growth, our ExtremeEnvironment Shakers are designed for use in extreme environments such as CO2incubators. A remote controller (that magnetically attaches to the outside ofmost incubators) allows for external control of settings, and the shaker baseis placed inside of the incubator. Microprocessor control ensures consistentshaking while safely ramping to the set speed. The exclusiveAccu-Drive shaking system utilizes dual-speed sensors to continuously monitorand maintain shaking speed - delivering exceptional speed control, accuracy anddurability. The externalcontrol module of the SHEX1619DG allows for settings to be easily viewed orchanged from outside of the incubator. The remote controller magnetically attachesto most incubators or can sit on a lab bench. Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zeroClick Here to View Product Video INCLUDED: The Ohaus SHEX1619DG Extreme Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus SHEX1619DG Extreme Shaker Specifications Speed Range15 to 500 rpmSpeed Accuracyabove 100 rpm ± 1% of set speed; below 100 rpm ± 1 rpmTimer1 second to 160 hoursOrbit0.75" (19 mm)Maximum Weight Capacity35 lbs (16 kg)Tray MaterialAluminumTray Dimensions (L x W)11 x 13" (27.9 x 33 cm)Overall Dimensions (L x W x H)Shaker: 11.6 x 14.0 x 5.9" (29.4 x 35.5 x 14.9 cm)Remote: 5.5 x 14.0 x 4.4" (15.0 x 35.6 x 11.2 cm)Ship Weight49 lbs (22.2 kg)ControlDigitalPower120V, 0.5A, 50/60 HzPower Consumption30 WSafety CertificationTUVCalibrationSpeed calibrationDrive SystemBrushless DC Motor;Triple EccentricTray ConstructionAluminum

Heidolph Hei-CHILL 1200 Chiller 115VFeatures - Designed for reliable continuous operation in the lab (more)oratory - Automatic start and shut down feature - Temperature range of -10°C to 40°C - Temperature stability of ± 0.5K - Maximum flow rate of 9L/min for models 600W and under, and 20L/min for models over 600W - Viewing window for thermal fluid level Clearly arranged control elements, with a large LED display, membrane keypad, and liquid level indicators Ventilation grille is held in place with magnets, allowing for very easy access for cleaning the air filter All Hei-CHILL models feature an RS 232 interface and alarm output for external communications The Hei-CHILL models with cooling capacities from 250 to 1,200 W are specifically designed for reliable continuous operation in the laboratory. The magnetic coupling of the pump and the electric motor prevents leakages. The large coolant reservoir to compensates for peak performance during the evaporation process. Other features include: clearly arranged control elements, large LED display, membrane keypad and window for monitoring the thermal fluid level. INCLUDED: The Heidolph Hei-CHILL 1200 Chiller 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty