Memmert ICO150 CO₂/O₂ Incubator

Memmert IF75 incubator/drying oven with forced convection 80 °C New equipment in original packaging  (more)Model: IF 75 Capacity: 75 litres With cable passage on the left wall Temperature range: +5 °C (above ambient temperature) to +80 °C Inner glass door Integrated digital temperature display 2 perforated stainless steel shelves Power supply: 230V Frequency: 50-60Hz Power: 1250W Internal dimensions: 40 x 56 x 33 cm (W X H X D) Overall dimensions: 58.5 x 94.4 x 51.4 cm (W X H X D) Weight: 66 kg

This LMS Counter-Top Laboratory Cooled Incubator was removed from a university lab where it was surp (more)lus to requirements. The unit powers on and has been tested with a digital thermometer (not included). Set at 4ºC our thermometer read 4ºCSet at -10ºC our thermometer read -4.8ºCThe unit had been running for a number of hours and settled at -4.8ºC Set at 22ºC our thermometer read 22.9ºCSet  at 30ºC our thermometer read 30.9ºC The unit is lockable however there is no key supplied with this unit. I recommend a replacement barrel and key. Interior dimensions:W45cm x H43cm x D28cm

This Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator was removed from a university (more) lab where it was surplus to requirements. The unit has been fully tested and recertified by a service engineer. We have a copy of the report available if needed. It is fully working but the O2 sensor is out of date (user replaceable). 2 Shelves - 52 x 49cm It is in good cosmetic condition but has some minor marks from use

Memmert IN160plus Natural Convection Incubator 161L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 161 L (5.7 cu.ft.) Features - Set temperature range from min. 5°C above ambient up to +80°C, with a display resolution of 0.1°C for precise control - Control technology includes adjustable parameters such as temperature (Celsius or Fahrenheit), air flap position, program time, and daylight savings time - HeatBALANCE function adapts the heating distribution between upper and lower circuits from -50% to +50% for optimal performance - Fixed sterilization program (4 hours/160°C) for chamber sterilization (not for load sterilization) - AutoSAFETY system provides integrated over- and undertemperature protection with visual and audible alarms - Stainless steel interior with a volume of 161 L and a max chamber load of 462 lbs, offering robust durability - AtmoCONTROL software available for data logging, programming, and management via USB or Ethernet - High-quality textured stainless steel casing, scratch-resistant and durable, with dimensions of 29.3" x 43.5" x 23" The Memmert IN160plus Natural Convection Incubator 161L, 115V is designed for precision temperature control in demanding laboratory applications. With a working temperature range of min. 5°C above ambient up to +80°C, this incubator ensures consistent conditions for your samples. The twin Pt100 sensors in a 4-wire circuit provide accurate temperature monitoring, while the adaptive HeatBALANCE function allows for fine-tuned heat distribution between the upper and lower heating circuits. The sterilization feature, with a fixed 4-hour cycle at 160°C, ensures a sterile environment within the chamber, safeguarding the integrity of your work. Equipped with the advanced ControlCOCKPIT system, this incubator offers an intuitive interface with dual high-definition TFT displays, allowing users to adjust parameters such as temperature, air flap position, and program times. The durable stainless steel interior, reinforced with deep-drawn ribbing, provides 161 liters of internal volume and can support up to 462 lbs of total load. For seamless data management, the AtmoCONTROL software enables logging and program management via USB or Ethernet. The Memmert IN160plus combines innovation, safety, and durability, making it a top choice for precise incubation needs. INCLUDED: TheMemmert IN160plus Natural Convection Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA INC 125 FS SP20 Digital Incubator Shaker Temperature Range Ambient +8°C to 80°C Speed Range 10  (more)to 300 RPM Chamber Volume 125L Features - Shaking stroke: 20 mm for optimum oxygen input - The shaker platform can be pulled out halfway (with line indicator) for comfortable and tilt-proof loading - The threaded grid on the platform allows the mounting of fixing clips or STICKMAX adhesive mat for different vessels and sizes - When the door is opened, the shaking function stops automatically - Shaking and temperature control function can be used independently of each other - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode for disinfection and reduction of cross-contamination (100/120°C) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber and triple-glazed door with window - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) - Very large LCD display for easy reading - Large viewing window and switchable interior lighting for observation of samples - Counter, timer, and timer auto (temperature-controlled) function to ensure reproducible test conditions The IKA INC 125 FS SP20 Digital Incubator Shaker is the first incubator shaker with a patented removable shaker platform. Without the platform, the unit can be used like a normal incubator. The large inner chamber with a volume of 125 liters offers space for up to 6 grid shelves (without shaker platform). Thanks to high temperature stability and a uniform shaking motion that improves oxygenation, the incubator shaker is the perfect solution for cell cultivation and other microbiological applications. Click Here to View Product Video INCLUDED: The IKA INC 125 FS SP20 Digital Incubator Shaker includes: - Shaker Platform SP20 - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 151140 Digital Forced Air Incubator, 1.4 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 1.4 cu. ft. (40L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light & dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - Internal auxiliary outlet provides power for one accessory to be used within the incubator - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Autoclave / sterilizer S8000 AES Biomerieux Autoclave - automatic media preparation machine Technica (more)l characteristics: Voltage: 220-240V, 50-60Hz Power: 3000W Maximum pressure: 1.8 bar (26.1 psi) Maximum temperature: 125 °C External dimensions (L) x (D) x (H): 50 x 60 x 44 cm Internal dimensions (Ø) x (H): 25.8 x 20 cm With many accessories (tanks + blades + seals, see photos) Warning, traces of wear on the plastics

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 500 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Ohaus MB32 Moisture Analyzer Maximum Capacity 90 g Readability Moisture Content 1 mg / 0.01% Recomme (more)nded Moisture Content 0.5 % to 100 % Features - High-performance moisture analyzer with a robust 90g capacity and 1 mg/0.01% readability for precise moisture content determination - Innovative carbon fiber heating technology ensures rapid and uniform heating - Enhanced connectivity with both USB and RS232 ports for easy data transfer and integration - Wide moisture content range from 0.5% to 100%, suitable for a variety of applications - Broad temperature range of 40°C to 180°C - Large 3.5 in (90 mm) pan size accommodates substantial sample quantities - Durable construction with a redesigned housing made from stronger materials - Comprehensive display features including RG%, temperature, DC%, time, method number, MC%, and weight for detailed result tracking - Multiple operational languages expand usability across global laboratories The Ohaus MB32 Moisture Analyzer combines high precision and robust functionality to meet the diverse needs of modern laboratories. With a strong 90g capacity and exceptional readability of 1 mg/0.01%, this device ensures accurate moisture determination across a wide range of moisture content from 0.5% to 100%. Its innovative carbon fiber heating technology delivers rapid and uniform heating, enhancing the efficiency of moisture analysis. Equipped with a large 3.5 in (90 mm) pan, the MB32 accommodates substantial sample quantities, making it ideal for high-throughput environments. The analyzer also features a broad temperature range of 40°C to 180°C, suitable for various applications. Durable construction and a comprehensive display that includes multiple critical data points such as RG%, temperature, and moisture content, ensure reliability and ease of use. Enhanced connectivity options like USB and RS232 allow for seamless integration into existing laboratory systems, furthering its utility in global applications. INCLUDED: The Ohaus MB32 Moisture Analyzer includes: - 3.5 in. Pan - In-Use Cover - Box, Aluminum Sample Pans - Pan Holder - Pan Handle - 5 Glass Fiber Pads - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf Replacement MTP Buckets Cat #022638866 The Eppendorf Replacement MTP Buckets Cat #02263886 (more)6 are designed to be used with the Eppendorf A-4-81 Swing Bucket Rotor. These replacement MTP (Microplate) buckets come in a set of 2 and are ideal for accommodating 4 microplates, 2 cell culture plates or 1 deep well plate per bucket. With a maximum speed of 4,000 RPM and maximum RCF of 2,900 x g, these replacement MTP buckets are capable of performing high-speed centrifugation with ease. The maximum radius of 16.3 cm allows for efficient sample processing while maintaining sample integrity. These replacement MTP buckets are a valuable accessory for researchers and scientists who require reliable and efficient sample processing within their Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf Replacement MTP Buckets Cat #022638866 includes: - Set of 2 Buckets - Full 6 Month Parts and Labor Warranty Eppendorf Replacement MTP Buckets Cat #022638866 SpecificationsMaximum Speed4,000 RPMMaximum RCF2,900 x gMaximum Capacity4 x Microplates Per Bucket2 x Cell Culture Plates Per Bucket1 x Deepwell Plate Per BucketMaximum Radius16.3 cmRotor CompatibilityEppendorf A-4-81 Swing Bucket Rotor