LMS 200 Cooled Incubator

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: Ambient +5ºC to 70ºC Temperature variation: ±0.2ºC Temperature setability: 1ºC Te (more)mperature deviation (spatial): ±1.5ºC Heating up time to 37ºC: 33 min Fan speed control: 4 Max load per shelf: 20 kg Maximum load total: 70 kg Capacity: 133 L Internal dimensions (WxDxH): 545 x 430 x 600 mm Dimensions (WxDxH): 705 x 625 x 820 mm Weight: 56 kg

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

This LMS Cooled Laboratory Incubator Model: 305 was removed from a university lab where it was surpl (more)us to requirements. The item is in reasonable cosmetic condition but the door has rust marks and scratches. The exterior also has scratches and dents. The red light is loose and not secured and there is some mould along the seal. We had a note from the lab saying there was an issue when setting the temperature. Setting it to refrigerate was a little temperamental but it does work. Internal dimensions:36cm D x 46cm W x 54cm H It was tested with a digital thermometer (not included)When set to -10˚C, the display showed -6.1˚C and the thermometer measured -8.7˚CWhen set to 37˚C, the display showed 37˚C and the thermometer measured 34.7˚CWhen set to 50˚C, the display showed 50.2˚C and the thermometer measured 47.6˚CWhen set to 4˚C, the display showed 7.3˚C and the thermometer measured 4˚C

Heraeus B-6200 Incubator Lab This item was removed from a university where it was surplus to require (more)ment. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition, with some damage present (as shown in slide).

Sanyo Laboratory CO2 Incubator Stack  Models - MCO-17AIC / MCO-17AI These were removed from a  (more)university lab where they were surplus to requirements. The units power up and are in good working order. They were tested with a digital thermometer (not included). They are in good cosmetic condition with minor marks from use. 1x Sanyo CO2 Incubator:Model - MCO-17AISN - 90705826 Inside dimensions - D51 W49 H66.5cm3 Shelves 46 x 46cm1 Tray 46.5 x 36.5 x 4cm 1x Sanyo CO2 Incubator:Model - MCO-17AICSN - 10100758 Inside dimensions - D51 W49 H66.5cm2 Shelves 46 x 46cm1 Tray 41 x 31 x 5cm

Small sample volume from 50ml -120ml. Continuously variable single shaft pump and stirrer with digit (more)al readout. Manual fill, drain and cleaning. Chemically compatible as standard. Particle size:Up to 600µm – sample dependent Stirrer speed: 350 – 3,500rpm Dimentions: 140mm x 175mm x 390mm Weight: 6.75kg 100-240V / 50-60Hz / 20W

Pirosecuenciador Qyagen Pyromark Q24. Analysis of 1 to 24 samples/15 min. Includes software on Cd. I (more)nformation transfer by USB. Specifications:

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta Select-Horn electronic muffle furnace has an interior enclosure made up of high-quality refractory plates and evenly distributed heating elements with special long-lasting high-melting point wire. Excellent thermal insulation and reduced consumption. Quick temperature recovery when opening and closing the hinged door.

Memmert HPP110eco Climate Chamber 108L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 108L (3.8 cu. ft.) Features - Temperature range from +5 to +70 °C with humidity or light, and from 0 to +70 °C without - Volume capacity of 108L for versatile storage and incubation needs - Equipped with an inner glass door and fully insulated stainless steel outer door - Precision temperature control with setting accuracy of 0.1 °C and dual Pt100 sensors for reliability - Humidity settings from 10% to 90% RH, managed by a hot steam generator and Peltier technology for dehumidification - Features TwinDISPLAY with adaptive digital PID-microprocessor for intuitive control and display - Programmable with AtmoCONTROL software via USB or Ethernet for advanced data management - Enhanced safety with AutoSAFETY over/under-temperature protection, ASF system, and visual/acoustic alarms The Memmert HPP110eco Climate Chamber 108L, 115V offers advanced environmental control with a versatile temperature range from +5 to +70 °C with humidity or lighting, and 0 to +70 °C without. Its 108L capacity provides ample space for diverse incubation and storage needs. The chamber is equipped with a fully insulated stainless steel door, complemented by an inner glass door for easy visibility without compromising stability. Temperature control is highly precise, with a 0.1 °C setting accuracy achieved through dual Pt100 sensors, ensuring consistent reliability across all applications. Humidity control ranges from 10% to 90% RH, facilitated by a hot steam generator and Peltier-based dehumidification for optimal performance in fluctuating conditions. Engineered for usability and control, the HPP110eco features the intuitive TwinDISPLAY system, driven by an adaptive digital PID-microprocessor controller with two high-definition TFT displays. Advanced programming options are accessible through AtmoCONTROL software via USB or Ethernet, allowing seamless data management and transfer. Enhanced safety features include the AutoSAFETY system, providing over/under-temperature protection, an ASF (AutoSAFETY Function) alarm system, and integrated visual and acoustic alerts to ensure safe, continuous operation. This chamber is ideal for controlled, precise climate conditions in laboratory and industrial applications. INCLUDED: The Memmert HPP110eco Climate Chamber 108L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Four load cell ramp platforms

SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sens (more)or & Sensor StandThe SCI340-ProT is one of the most technically advanced hotplate-stirrers in the marketplace and features an independent back-lit LCD display for both heat, stirring and timer functions and PID technology. The MS-H-Pro-T controls temperature at +/- 1ºC. Simply set the timer from 1min to 99hr-59min and the hotplate will heat at the target temperature for the set time period and automatically turn off. If the stirring function is activated, the unit will continue to stir until switched off. The MS-H-Pro-T also has a DC brushless (spark free) motor for extremely long life and excellent performance. SCILOGEX 340°C magnetic hotplate stirrers include all leading safety standards and features for superior ease of use and are cost-effective. They are widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals, etc.Product Features - Heat only, stir only or heat and stir together functions, High-resolution LCD display shows actual temperatures and speed. - Digital speed control with max. speed up to 1500rpm - External temperature control is possible by simply connecting a PT-1000 temperature sensor (sold separately) with accuracy at ±0.2°C. - Max. stirring quantity of H2O at 20L. - RS232 function provides PC control and data transmission (free software available) - Wide range timer function from 1min to 99h59min (MS-H-ProT only) - The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off. - Automatic spin bar retrieval - Low temperature stability - Digital temperature control with max. temperature at 340°C - Stainless steel work plate with ceramic coating provides good chemical-resistant performance. - Accessory reaction blocks for flasks and vessels available sold separately. - Electronic speed control for constant speed even during changes in load - Brushless DC motor is maintenance free. - High magnetic adhesion - Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar. Click Here to View Product Video INCLUDED: The SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - PT 1000 Temperature sensor and stand - Two Year Manufacturer's Warranty