Kendro HERAcell 150 CO2 Incubator Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

This Robbins Scientific Micro Hybridization Incubator  Model 2000  Cat no. 1040-50-2 was r (more)emoved from a university lab where it was surplus to requirements. The unit powers up and the tube rotator is working, though one tube grip is missing. It was tested with a digital thermometer (not included). It was set to 37˚C which it reached and held at. It was then set to the max of 99˚C which it reached after about 20 minutes. Our thermometer read 101˚C. It is in reasonably good cosmetic condition with some marks from use. It comes with 3 x Hybaid Glass Bottles with Bottle Grippers HB-OV-BGL Internal dimensions - D18 x W35 x H20cm

Memmert BM 400 incubator / oven with natural convection 70°C Capacity: 53 litres Temperature range:  (more)+5°C above ambient to +70°C Inner glass door Integrated digital temperature display 1 stainless steel shelf Power supply: 230 V Frequency: 50-60 Hz Power: 800 W External dimensions (W) x (D) x (H): 55 x 53 x 68 cm Internal dimensions (W) x (D) x (H): 40 x 33 x 40 cm Weight: 35 kg Tested at 45°C (measured 43.8°C)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Temperature range: -5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluctuation  (more)(at 40°C): ± 0.1 K Temperature uniformity (at 5°C): ± 0.6 K Temperature uniformity (at 25°C): ± 0.2 K Temperature uniformity (at 40°C): ± 0.3 K Warming up time (to 40°C): 5 min Cooling down time (fromt 40°C to 5°C): 58 min Recovery time after door was opened for 30 sec (at 5°C): 4 min Recovery time after door was opened for 30 sec (at 40°C): 1 min Maximum load: 40 kg Maximum load per shelf: 15 kg Capacity: 53 L Dimensions (WxHxD): 635 x 835 x 580 mm Interior dimensions (WxHxD): 400 x 400 x 330 mm Weight: 72 kg

Genlab Model LCI/12V/PDIG Lab Incubator This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is in good working order. (Digital thermometer not included) 4 Shelves - 60 x 60cm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Turbulent Flow Chromatography Manufacturer: Cohesive Technologies Model: TurboFlow HTLC Cyclone P 0, (more)5 x 50 mm S/N: 618029 P/N: 952707 Item delivered:- 1 x TurboFlow HTLC Cyclone P 0.5 x 50 mm Conditionen:The column is in new condition.

The new Falc Instruments laboratory instruments improved the construction quality of the structure a (more)nd are completed with a touch screen panel. Falc laboratory ovens are widely used in thermostatic applications requiring high precision. These instruments are ideal for various operations, such as drying and sterilizing laboratory glassware, as well as for material strength testing. Depending on your specific needs, you can choose a model with or without ventilation, based on the level of accuracy required. Unlike incubators, laboratory ovens can reach high temperatures, up to 300°C. The characteristics of the new Falc models: - Touch screen display - 4 language setting - Digital timer - Program saving function - Programmable delayed start For over 50 years, Falc products have stood out for their solid and simple construction, guaranteeing durability and reliability over time. The new models have been updated with a touchscreen control panel, which simultaneously displays temperature, humidity and timer. The novelties and classics of the new Falc models: 1 - Silicone gasket: adheres perfectly to the door to maintain the set temperature, preventing heat loss and variations inside the chamber. 2 - Internal chamber made of 18/8 stainless steel. Exteriors in steel painted with anti-acid epoxy powder. Internal glass door for incubators only. 3 - Ø10mm upper hole for inserting thermometers or probes for instrument calibration. 4 - Touchscreen control panel with 4 languages ​​(Italian - English - French - Spanish) and safety class 3.1 as standard. The control's advanced functions include saving programs (temperature/maintenance/ventilation) and delayed start (day, time). 5 - Ergonomic handle with key lock. Falc chemical laboratory stoves represent the excellence of Made in Italy in the scientific instrumentation sector. Designed and manufactured with the utmost care, these stoves combine advanced temperature control technologies with rugged stainless steel construction, ensuring reliable, long-lasting performance. The double internal stainless steel chamber, combined with the pre-heating system in the pre-chamber, ensures excellent uniformity of the temperature inside. Various accessories and customization options allow you to precisely adapt them to any specific application. - Ø40mm chimney on the back for smoke exhaust/cable passage. - Chimney Ø40mm on the back, with shutter opening adjustable from the control panel with opening from 0 to 40mm. - Wifi module for remote monitoring via APP. - Shelves in perforated sheet metal. - Grid shelves. - Tables and trolleys.

MARSHALL Select MS-OT40LC Overhead Stirrer, 40L Maximum Stirring Quantity 40L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 50,000 mPas Features - High torque output of 60 Ncm ensures effective mixing performance - Features brushless DC motor for longevity and maintenance-free operation - Slow start-up function to prevent spills and splashes during use - LCD display for real-time monitoring of speed and torque - Through-shaft design allows for easy adjustment of the impeller position - RS232 interface for PC control and data transmission - Safety circuits include automatic stop in anti-stall or overload conditions - Visual alarms for overload protection enhance safety during operation - Torque trend display provides real-time information on viscosity changes - Capable of accepting pass-through stirrer rods for versatile setup options - IP21 protection class ensures basic protection against solid objects and dripping water The MARSHALL Select MS-OT40LC Overhead Stirrer is designed to handle stirring capacities up to 40L, making it ideal for extensive laboratory applications. It operates within a speed range of 50 to 2,200 RPM with a high control accuracy of ± 3 RPM, supported by a robust brushless DC motor. The stirrer offers a maximum viscosity handling of 50,000 mPas and a torque output of 60 Ncm, ensuring effective mixing even with thick samples. Equipped with an advanced microprocessor, the MS-OT40LC provides precise speed control and includes features like a slow start-up to prevent spills and a safety circuit for overload conditions, which automatically stops the motor. The MS-OT40LC’s through-shaft design facilitates easy adjustment of the impeller position, enhancing the flexibility and efficiency of mixing operations. The LCD display allows for real-time monitoring of both set and actual speed and torque, ensuring constant performance even as sample viscosities change. Additional features include an RS232 interface for PC control and data transmission, and visual alarms for overload protection. The IP21 protection class signifies basic protection against solid objects and dripping water, making this stirrer a dependable choice for busy laboratory environments. INCLUDED: The MARSHALL Select MS-OT40LC Overhead Stirrer, 40L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty