JOUAN EB 170 incubator with natural convection 70°C

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Technical Specifications - ISWV02HDG - Uniformity: ±0.5 to 37°C - Drive system: stepper motor - Safety Certification: CE; TUV - Speed ​​Accuracy: ±1 rpm - Timer: 1 second to 160 hours Not sure which agitator to choose? Download the Incubator Shaker Selection Guide to get a quick overview of all available models.

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator This was removed from a universit (more)y lab where it was surplus to requirements. The system is faulty and requires a new controller. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs.

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

Memmert IN750 Natural Convection Incubator 749L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 749 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Large 749 L (26.5 cu.ft.) capacity for versatile applications - High-precision control with 0.1 °C resolution and 1 Pt100 sensor DIN class A - SingleDISPLAY ControlCOCKPIT with adaptive PID-microprocessor controller and high-definition TFT display - SetpointWAIT function ensures process timing starts once set temperature is reached - Inner glass doors with fully insulated stainless steel doors and 2-point compression lock - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on all sides The Memmert IN750 Natural Convection Incubator 749L, 115V provides an expansive 749 L (26.5 cu.ft.) chamber, perfect for applications needing precise temperature regulation. Operating from +20°C to +80°C and capable of maintaining settings as low as 5°C above ambient, it features the user-friendly ControlCOCKPIT with SingleDISPLAY and high-definition TFT display for adjusting temperature (Celsius or Fahrenheit), air flap position, and timer. Its fully insulated stainless steel door includes an inner glass pane with a 2-point compression lock for visibility and safety. Natural convection and a pre-heated fresh air admixture ensure consistent chamber conditions, while AtmoCONTROL software enables efficient data management. Built for durability, it accommodates up to 14 shelves with a max load of 661 lbs, making it ideal for demanding lab settings. INCLUDED: The Memmert IN750 Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA KS 3000ic Incubator Shaker Type of Movement Orbital Temperature Setting Range 12°C - 80 °C Speed (more) Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly This advanced incubator shaker combines innovative design with precise temperature control, allowing for unattended operation in your lab. Featuring orbital movement with a 20 mm stroke and a shaking capacity of 7.5 kg, it offers a speed range of 10 to 500 rpm, displayed on an LED screen. The integrated timer ranges from 1 second to 59940 minutes, supporting both continuous and timed operations. With a heating range of 12°C to 80°C and a 50-liter chamber, this unit ensures accurate and stable temperature control, making it perfect for a variety of laboratory applications. INCLUDED: The IKA KS 3000ic Incubator Shaker includes: - KS 3000 ic control - PT 1000.80 Temperature sensor, stainless steel - Clamping screws short (4 pcs.) - PC 1.1 Cable - USB A-B Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA KS 3000ic Incubator Shaker SpecificationsType of movementorbitalShaking stroke20 mmPermissible shaking weight (incl. attachment)7.5 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)10 rpmSpeed range10 - 500 rpm Speed display LED Speed deviation 1 %Speed control1 RPM stepsTimeryesTimer display7 segment LEDTime setting min.1 sTime setting range1 - 59940 minOperating modetimer and continuous operationHeat output1000 WSet temperature resolution0.1 ±KControl accuracy with sensor (1 vessel 0.5 L H2O, RT 22°C, T=37°C)0.5 ±KTemperature displayyesTemp. stability (0,2l H2O; RT 25°C, T=37°C)0.1 ±KTemperature range (inlet T>3°C)12 - 80 °COperating area inner chamber330 x 330 x 258 mmTotal volume inner chamber50 lRaw material housingSheet metal powder coatRaw material hoodPMMARaw material front foilpolyesterRaw material front panelABS paintedTemperature stability (1 vessel 0.5 L, RT 25°C, T=37°C)0.05 ±KTemperature homogenity (5 vessel 0.5 L; RT 25°C, T=37°C)0.5 ±KHeight with open hood875 mmDimensions (W x H x D)465 x 430 x 695 mmWeight37 kgPermissible ambient temperature15 - 32 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 30RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input1120 WComparison of ModelsSpecificationIKA KS 3000iIKA KS 3000icIKA KS 4000iIKA KS 4000icShaking Stroke20 mm20 mm20 mm20 mmPermissible Shaking Weight (incl. attachment)7.5 kg7.5 kg20 kg20 kgMotor Rating Input45 W45 W82 W82 WSpeed Range10 - 500 rpm10 - 500 rpm10 - 500 rpm10 - 500 rpmSpeed Deviation0.010.015 ±rpm5 ±rpmTimerYesYesYesYesTime Setting Range1 - 59940 min1 - 59940 minNot specifiedNot specified.comparison-table tr td:nth-child(3) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Benchmark MyTemp Mini Digital Cooling Incubator With digital temperature control, the MyTemp incubat (more)ors provide convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up or cool down while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel. Despite a modest footprint of 14.5" x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation. INCLUDED: The Benchmark MyTemp Mini Digital Cooling Incubator includes: - Two Adjustable Shelves - Internal Outlet - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

An additional anti-draft chamber dedicated for mass comparator APP.64.5Y.KO. It is intended for inst (more)ruments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator’s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

IKA Pette multi 12 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 0.5 - 10 µl includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette multi 12 x 0.5 - 10 µl SpecificationsParameterValueDesignAir displacement piston-operated pipetteHandlingMechanicalVolumeVariableNumber of channels12Colour CodeGrayNominal volume10 µlVolume min.0.5 µlVolume max.10 µlIncrements0.01 µlAccuracy with nominal volume±0.2 µlPrecision with nominal volume±0.1 µlAccuracy with 50% of nominal volume±0.2 µlPrecision with 50% of nominal volume±0.1 µlAccuracy with 10% of nominal volume±0.08 µlPrecision with 10% of nominal volume±0.05 µlCertificate of conformity according to ISO 8655yesAutoclavableyesPiston materialStainless steel DLC coatedDimensions (W x H x D)119 x 235 x 63 mmWeight0.160 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity90 %Comparison of ModelsSpecification12 x 0.5 - 10 µl12 x 10 - 100 µl12 x 20 - 200 µl8 x 0.5 - 10 µl8 x 10 - 100 µl8 x 20 - 200 µlNumber of Channels121212888Nominal Volume10 µl100 µl200 µl10 µl100 µl200 µlVolume Range0.5 - 10 µl10 - 100 µl20 - 200 µl0.5 - 10 µl10 - 100 µl20 - 200 µlIncrements0.01 µl0.1 µl0.2 µl0.01 µl0.1 µl0.2 µlAccuracy (Nominal Volume)±0.2 µl±0.8 µl±1.6 µl±0.2 µl±0.8 µl±1.6 µlAutoclavableYesYesYesYesYesYesDimensions (W x H x D)119 x 235 x 63 mm119 x 235 x 63 mm119 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mmWeight0.160 kg0.182 kg0.195 kg0.135 kg0.147 kg0.160 kg.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Accuris Precision Balance, 320 Grams Accuris Precision balances quickly and accurately display sampl (more)e measurements on a large, backlit LCD screen. Utilizing highly precise, gold plated ceramic capacitance sensors, these balances tare and stabilize quickly and provide reliable weight measurements within 0.001 grams. Six models are available in the Precision Balance range, covering a wide range of maximum capacity requirements. The smaller capacity models (120g, 320g, and 500g) include a glass draft shield with 3 sliding doors for easy access the weighing chamber. These models offer readability to .001g (1mg). All models feature a control panel with a large, bright back-lit LCD screen that is easy to use and easy to see. The advanced software includes weighing modes for standard weighing, piece counting, percent deviation and also check weighing for component inspection.INCLUDED: The Accuris Precision Balance, 320 Grams includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty