ICT-R 52 FALC programmable incubator

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack These were removed from a u (more)niversity lab where they were surplus to requirements. They have been fully tested to incubate and shake by a service engineer. They are in full working order. Inside dimensions - D57 W93 H44cmPlatform - 46 x 77cm They come with brackets for stacking, but there are only 3 feet and one of them is broken.

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R 120 FALC

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V Temperature Range -1 (more)0°C to +50°C Temperature Distribution Accuracy ±1.0°C (refrigerator in continuous operation at 37°C) Chamber Volume 286L Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W) - Interior light for better sample visibility (IN604W/804W) - Optional slide shaker table available to put in and take out samples easily (IN604W) Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Operating temperature range: -10~ + 50° C INCLUDED: The Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V includes: - 5 x Shelves w/ 10 Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1060ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1060ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1060ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN260plus Natural Convection Incubator 256L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 256 L (9 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 256 L (9 cu.ft.) with a maximum chamber load of 661 lbs - Precise temperature control with a 0.1°C setting resolution and 2 Pt100 sensors DIN Class A for mutual monitoring - ControlCOCKPIT with TwinDISPLAY offers adaptive multifunctional PID-microprocessor control and dual high-definition TFT-color displays - Natural convection with fresh air admixture using an electronically adjustable air flap, vent connection with restrictor flap - Comprehensive safety features including overtemperature monitor (TWW), mechanical limiter (TWB), and AutoSAFETY system with visual and audible alarms - AtmoCONTROL software for data logging and program management, with Ethernet interface and USB stick for ease of use - Stainless steel interior reinforced by deep drawn ribbing and large-area heating on four sides for even temperature distribution The Memmert IN260plus Natural Convection Incubator 256L, 115V offers unmatched precision and reliability for temperature-sensitive applications. With a spacious 256 L (9 cu.ft.) stainless steel chamber, this incubator is designed for consistent temperature control, ranging from +20°C to +80°C, with an accuracy of 0.1°C. The advanced ControlCOCKPIT system, featuring a TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller, ensures precise adjustments in temperature, air flap position, and program time, allowing for complete customization. Two Pt100 sensors in a 4-wire circuit provide mutual monitoring for accurate and consistent performance, making this incubator ideal for demanding lab environments. This incubator is equipped with essential safety features such as an overtemperature monitor (TWW), mechanical limiter (TWB), and the AutoSAFETY system, which provides visual and audible alarms for any temperature fluctuations. Additionally, the Memmert IN260plus offers natural convection and electronically adjustable fresh air admixture, enhancing airflow within the chamber. Its stainless steel interior, reinforced with deep-drawn ribbing and four-sided heating, ensures even temperature distribution and easy cleaning, while AtmoCONTROL software facilitates data logging and program management via Ethernet or USB connection. Designed for durability and optimal performance, this incubator is perfect for laboratories requiring precise, high-capacity temperature control. INCLUDED: TheMemmert IN260plus Natural Convection Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PB C model - For tanks of 200 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Basic Unit Compatible Glass Plat (more)e Sizes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 500 V, 500 mA, 12 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 10 x 8 cm - Efficient active cooling ensures sharp bands - Quick and easy to assemble - Requires minimal buffer - Easily upgradable to the SE260 (with optional accessories) resulting in the additional capability of accommodating both 10 x 8 and 10 x 10.5 cm gels - Choose from a wide variety of accessories The Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Unit is a compact, reliable system engineered for rapid electrophoretic separation, making it ideal for quick screening applications. This unit supports a maximum glass plate size of 10 x 8 cm, providing an efficient setup for a variety of protein and nucleic acid analyses. With its active cooling system, the SE250 ensures sharp, well-defined bands across samples, delivering consistent results that labs can rely on for precise electrophoresis. The SE250 is designed for quick assembly and minimal buffer requirements, streamlining workflow without compromising performance. For labs that may want to expand their capabilities, this unit can be easily upgraded to the SE260 model, adding compatibility for both 10 x 8 cm and 10 x 10.5 cm gels and broadening the range of precast gel options available. Operating smoothly within standard lab conditions, this unit handles temperatures up to 45°C and humidity levels up to 80%, while its power settings of up to 500 V and 500 mA ensure versatility for diverse experimental needs. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber with Cooling Core - Safety Lid with High Voltage Leads - Casting Cradle with Sealing Gasket Set - Casting Clamp Assemblies, 2 pcs - Cams, 4 pcs - Glass Plates, Rectangular, 10 x 8 cm, 10 pcs - Alumina Plates, Notched, 10 x 8 cm, 2 pcs - Spring Clamps, 4 pcs - Combs,10 well, 2 pcs - T-Spacers, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal INCLUDED: The Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber with Cooling Core - Safety Lid with High Voltage Leads - Cams, 4 pcs - Spring Clamps, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MS bench include integrated noise reduction enclosures for the mass spec vacuum pumps with vibration (more) dampening systems and overheating temperature alarms. Compatible with all major Mass Spectrometry Original Equipment Manufacturer such as :Agilent, Analytik-Jena, Bruker, Gerstel, Leco, PerkinElmer, Sciex, Shimadzu, Thermo Fisher Scientific, Waters. Dimensions (HxWxD): 940 x 1900 x 880 mm Internal dimensions (HxWxD): 720 x 830 x 750 mm

Excluding connection gas kit (see pictures for kit)