ICT-R 240 FALC programmable incubator

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab This item was removed from a university where it was  (more)surplus to requirement. The unit powers up and is in good working order (thermometer not included). Also includes the following: 1 x Shelf:  47 x 45 cm

This Thermo Scientific 3311 Forma Steri-Cult Co2 Incubator was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and has been tested extensively at 37˚C and 5% CO2 as well is 50% humidity. (Testing probes not included). We calibrated it to our working temperature and testing equipment, but will likely need calibrating again upon installation. It is in full working order. It is in good cosmetic condition with minor marks from use.

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 150 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Capacity of 2 agitator trays; for containers over 180 mm only 1 tray can be used - Temperature stability ±0.2°C - Shaking frequency: 20 to max. 250 min-1 - Stirring width: 30 mm - Usable volume 150 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Amplitude of shaking 25 mm - Load capacity max. 20 kg - Timer from 1 minute to 999 - Vibrating platform width 674 mm - Vibrating platform depth 540 mm - Capacity approx. 150 L / 2 stirring trays - External structure in electrolytically galvanized steel sheet, powder coated

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

Temperature range: Ambient +4°C to 50°C Temperature control increment: 0.1°C Temperature accuracy (a (more)t 37°C): ±0.4°C Temperature stability (at 37°C): ±0.1°C Temperature uniformity (at 37°C): ±0.3°C CO2 range: 0.1 -  20% CO2 control increment: 0.1% CO2 accuracy (at 5% CO2): ±0.3% CO2 stability (at 5% CO2): ±0.1% CO2 uniformity (at 5% CO2): ±0.1% Inner door with 4 segments (for minimal CO2 loss) Humidity 95% at 37°C via 2.5 L water tray Number of shelves: 4 Maximum shelf load: 10 kg Maximum load: 40 kg Capacity: 167 L Dimensions (BxHxD): 718 x 900 x 715 mm Internal dimensions (BxHxD): 539 x 692 x 445 mm Weight: 113 kg

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave This was removed from a university lab (more) where it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is sin good cosmetic condition with minor marks.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don&rsquo;t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what&rsquo;s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Ohaus AX423N Adventurer Precision Balance Maximum Capacity 420 g Readability 0.001 g Repeatability  (more)(Typical) 1 mg Features - AutoCal™ internal calibration for precise measurements - 4.3-inch full-color VGA touchscreen with user-controlled brightness - Multiple connectivity options: RS232, USB Host, USB Device - GLP/GMP compliant with real-time clock and selectable communication settings - Stainless steel pan with 130 mm diameter and 2-second stabilization time Striking theideal balance between inventive features and functional, uncomplicated weighingcapabilities, the Ohaus Adventurer AX423N incorporates all of theapplications necessary for routine weighing and measurement activities. With acolor touchscreen, GLP/GMP compliance capabilities, two USB ports, and muchmore, Adventurer AX423N is the most complete balance in its class.Click Here to View Product Video INCLUDED: The Ohaus AX423N Adventurer Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic BA310E LED Trinocular Compound Microscope Based upon the successful BA310 microscope, the Moti (more)c BA310 Elite was designed for use in universities, clinics and laboratories. With many improvements over its predecessor, the BA310 Elite was created to offer versatility and ease of use, all in a cost effective and durable package. The BA310E features a fully interchangeable illumination system, enabling multiple styles with the same microscope. While maintaining the full Koehler illumination feature, users can easily switch from a 6v/30w Halogen lamp, to a 3w LED. Furthermore, Motic offers LED lamps with two different color temperatures – 4500K and 6000K. The BA310E also includes Motic’s new EC Plan Achromat objectives. The EC series feature increased working distances, greatly reducing sample contamination when switching from oil to dry lenses. And with significantly improved field flatness and resolution, these provide a fully corrected intermediate image without colored fringes. This microscope can also be easily upgraded for additional modes of operation. Motic offers optional hardware and optics for polarization, phase contrast as well as darkfield. Please see the tab labeled “Accessories” for a full selection of objectives, sliders, and much more. Digital documentation is easily performed with any of Motic’s C-mount cameras, the Moticam. Ranging from 1.3MP to 10MP, these make a perfect accessory for your trinocular microscope, making quick work of analysis and documentation. All Moticams deliver sharp live images, have easy post capture handling, and include all necessary software. And for those wishing to use a traditional SLR camera, Motic offers a full line of adapters and photo eyepieces.Click Here to View Product Video INCLUDED: The Motic BA310E LED Trinocular Compound Microscope includes: - EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Observation tube - Eyepiece - Nosepiece - Objectives - Rackless stage - Condenser - Illumination - 5 Year Manufacturer's Warranty