ICT-R 120 FALC programmable incubator

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  Plexiglass windows door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard! - Inner chamber in aluminum for better heat transport.

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-A FALC laboratory incubator

Thermal shaker with Ohaus incubator OHAUS thermal agitators are designed for applications that requi (more)re constant and precise high-speed shaking, with heating or cooling. The temperature control allows to reach 17°C below the ambient temperature (for the model with cooling) up to 100°C. In case of high accuracy, the temperature can be calibrated by the user. Thanks to interchangeable blocks it is possible to customize the instrument for different applications, housing test tubes or microplates. The intuitive touchscreen allows the operator to view all program steps and monitor the entire process with a simple glance. - Best-in-class thermal performance thanks to advanced electronics and software. Up to 17°C below ambient temperature. - The intuitive touchscreen simplifies use and programming, with complete functions and help screens in six different languages, to assist the operator while using the unit - Easy creation of programs for repetitive applications. Memory for five different five-step programs. The USB port allows you to transfer test data to a flash drive for data collection and program storage Applications DNA, RNA, cell cultures, hybridizations, protein studies Display 4.3-inch (10.9 cm) color liquid crystal touchscreen (LCD) display, programmable in six languages Operation Detachable three-wire cable and plug (included). The unit requires a lock. Compatible with Eppendorf Thermomixer® R blocks Communication The USB port guarantees great flexibility in data collection and transfer Structure Cold-touch Valox construction, removable plastic rack, cover and screwdriver for block removal (included) Construction features Hot Cover Indicator, Audible Alarm, Maximum Temperature Limitation Function, Temperature Priority Function, Pulse / Fast Mix Mode, Temperature Calibration Mode, Temperature Rise Rate Function Technical Characteristics Specifications of the ISTHBLHTS model - Orbital movement, 3mm - Temperature calibration - USB - Brushless DC Motor Transmission - Heating rate (/min): 5°C/min - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Temperature accuracy (±): +/- 0.5°C between 20°C and 45°C; +/-2°C between 20°C and 45°C - Timer: from 1 second to 99 hours and 59 minutes

Orbital shaker with Ohaus incubator and cooling The innovative OHAUS incubating cooling shakers are  (more)designed to have a wide temperature range from 10°C below ambient up to 65°C to ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - Prepared for the use of microplates, without the need for accessories, and can easily accommodate modular blocks thanks to the block adapter supplied. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The innovative design with Peltier system, for direct contact between plate and sample, ensures rapid and uniform heating and cooling precision. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicator Technical Specifications - ISICMBCDG - Calibration: temperature calibration - Transmission System: Brushless DC Motor; triple Eccentric - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Speed ​​range: 100 to 1,200 rpm - Timer: 1 second to 160 hours - Tray structure: aluminum

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Compass CX5200 portable scale Ohaus The Compass CX series has been designed to have the highest poss (more)ible energy efficiency, in fact it offers you a battery life of up to 1,000 continuous hours, allowing uninterrupted operation. Slim, stackable and lightweight design, the CXs fit into lab, industrial, educational and even home environments. Simplified two-button operation makes it a breeze to use and the large backlit LCD display allows for easy viewing of weighing results. - Low power consumption design that allows uninterrupted operation - 1,000 hours - Improved functionality thanks to the large backlit LCD display and two-button operation - Convenient compact design for convenient storage - Stackable Applications Weighing, Display Hold Screen Liquid crystal display (LCD) with backlight Operation 3 x AA batteries (included) or AC adapter (not included) Communication Unavailable Construction ABS housing, stainless steel tray, transport lock, non-slip feet Characteristics of the project Stability indicator, mechanical and software overload / underload protection, low battery indicator, automatic shutdown

QUALITY LABORATORY CENTRIFUGES - OHAUS Ohaus designed this instrument to cover virtually all applica (more)tions in research, industrial and clinical laboratories. The bestselling FC5718, like the entire Frontier™ 5000 range, offers high speed performance for maximum volume, automatic rotor identification and next generation safety features. The best versatility - Large variety of compatible rotors and accessories (19 optional rotors and 121 accessories) - Microliter to 4x100ml capacities (including PCR strips and microliter plates) - High-speed centrifugation for tubes from 0.2ml up to 85ml - Available in the version with refrigeration system and variable temperature from -20°C to 40°C The best usability - Automatic recognition of the rotor in seconds - No risk of damaging the centrifuge even if used by less experienced personnel - Easy-to-read LCD control panel; two-line display and real-time information - Ergonomic adjustment knob for easy parameter setting - Ability to set and view the speed in both rpm and RCF - 99 sets of storable parameters More security - Double imbalance sensor: two separate sensors designed to detect high and low vibrations, caused by imbalances; computerized detection system with dedicated unbalance parameters for each rotor - Motorized locking system for the centrifuge lid - Overspeed protection automatically activated upon rotor installation - Better protection for both equipment and personnel You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. Applications Separation, sample preparation, cell pelletization, protein separation, nucleic acid separation, cell concentration, chemical separation, diagnostics, environmental sample preparation, blood sample processing Screen Backlit Liquid Crystal Display (LCD) Materials Corrosion resistant stainless steel chamber with polycarbonate / ABS plastic lid Additional features Ten speeds of acceleration and deceleration, selection of run time from 10s to 99h 59min or continuous, CFC-free refrigeration system (refrigerated models), sample temperature (refrigerated models), lid lock system, overspeed protection, detection double imbalance TECHNICAL FEATURES - Speed ​​range from 200 rpm to 18,000 rpm - Maximum relative centrifugal force (xg) 23,542 g - Maximum capacity (rotor) 4 x 100 ml - Program memories 99 - Acceleration gear 10 - Deceleration gear 10 COMPATIBLE ROTORS: Angle 4 x 85ml ID RB Hi. Angle 12 x 15ml RB / FA ID. Angle 24 x 1.5 / 2.0ml ID Sealable. Angle 6 x 50ml RB ID Hi. Swing out 4 x 100ml ID. Angle 12 x 1.5 / 2.0ml ID. 4 x 8W PCR Strip ID Corner. Angle 44 x 1.5 / 2.0ml ID. Swing out 4 x 100ml ID sealable. Angle 6 x 85ml ID RB. Angle 24 x 1.5 / 2.0ml ID. Angle 6 x 85ml RB ID Hi. Angle 30 x 15 ml RB / FA ID. Angle 30 x 1.5 / 2.0ml ID Sealable. Angle 10 x 50 ml FA ID. Angle 64 x 0.5ml ID. Angle 20 x 10ml ID RB Hi. Angle 6 x 50ml RB / FA ID. Swing out 2 x 3MTP ID.