ICT-C 240 FALC cooling incubator

Sanyo MCO-20AIC C02 Incubator This item was removed from a university where it was surplus to requir (more)ement. The unit powers up and is in good working order (thermometer and CO2 sensor not included). It is in good cosmetic condition internally and externally. Internal dimensions are as follows:L57cm x W45cm x H66cm. Features:2 x Shelves

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator All items are in good cosmetic condition wit (more)h minimal wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

Sanyo MCO-17AI CO2 Incubator Lab This item was removed from a university lab where it was surplus to (more) requirement. The unit powers up and is in good working order. It is in good cosmetic condition. Specifications; - Model: MCO-17AI - Serial#: 90100724

Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V Temperature Range 5 (more)°C to 60°C Temperature Distribution Accuracy ± 0.5°C Chamber Volume 286L Features - Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration - 44% power savings compared to previous models - Controller upgraded for easier viewing and operability - Temperature distribution accuracy improved for better incubation - Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO2 emission monitor Programmable, eco-friendly 286L refrigerated incubator. Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration. Controller upgraded for easier viewing and operability. Improved temperature distribution accuracy for better incubation. Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO₂ emission monitor. Operating temperature range 0~ + 60°C. INCLUDED: The Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V includes: - 5 x Shelves w/ Brackets - 2 Keys - Silicon Stopper for Cable Hole - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 60 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Stirring width: 30 mm - Usable volume 68 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Shaking width 30 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 450 mm - Capacity approx. 60 L / 1 stirring tray

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate Temperature  (more)Range 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system Heidolph 036110229 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145 mm Plate is equipped with numerous interfaces for automated laboratory processes. The RS232 and USB B ports allow a control via our integrated Hei-PROCESS solution. You can actually integrate your device in our Hei-CONTROL Pro software via the LAN interface. As of the middle of 2024, the LAN interface will additionally support the communication protocol OPC UA. The USB A interface at the front allows data logging via a USB stick. For more comfort and safety, you can connect the magnetic stirrer with the electric Heidolph lab jack via the USB C interface. There are three heating modes for temperature control: FAST for a quick heating, as well as PRECISE and PRECISE+ for the exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 and the double sensor Pt1000 that allows the simultaneous measurement in your sample and in the bath liquid. The possibility to program ramps and to create individual profiles, increases the precision and reproducibility of your experiments. For the stirring speed, there is a three-stage setting (start-up behavior). For mixing your sample optimally, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. This magnetic stirrer offers all relevant safety features. The large safety distance between the heating plate and the control panel as well as the visual residual heat indicator at temperatures 50 °C protect against burns. The patented Kera-Disk® plate made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for the use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Ultimate (145 mm diameter) - Pt1000 Temperature Sensor - Pt1000 Holder with Cable Device - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

Scilogex 0.2mL Block The Scilogex Block has the capacity to accommodate 54 x 0.2mL tubes. Each hole  (more)has a diameter of 6mm and overall dimensions are 15 x 9.5 x 5cm. INCLUDED: The Scilogex 0.2mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The G 7883 washer-disinfector is suitable for reusing laboratory glassware for analytical experiment (more)s in, for example, industrial, environmental and research laboratories. This appliance has a large two-tier wash area and can be built-in under a continuous worktop or used free-standing. After an intensive main cleaning phase, disinfection takes place at >90°C and a storage time of 5 minutes. The final rinse is performed with deionized water without rinsing agents. Control/programs: Multitronic Novo Plus control (certain process parameters can be changed), with 10 standard cleaning programs Program operation/display: Operation via one-button program selector, display of program cycles, display of temperature and program duration, display of program end, optical and acoustic signal, indicator lights for service and fault messages Cleaning mechanisms: Rotating: two spray arms on top and bottom of the chamber, third spray arm on top basket. Dosing devices: Valve dispensers for powdered detergent and liquid detergents. Circulation pump: 400 l/min Temperature: Freely adjustable up to 93°C Drain: 1 drain hose Drying capacity: Gravity convection drying system, 10 minutes. Can be turned on or off in any cycle Water connection: 1x hot water, 1x cold water, 1x purified water Dimensions (WxDxH): 600 x 600 x 850 mm Weight: 74 kg

Speed range: 100 – 16220 rpm (50 rpm increments) Reletive centrifugal force: 1 x g – 25001 x g (50 x (more) g increments) Maximum kinetic energy: 9920 J Temperature range: -11°C to 40°C Run time: 10 s – 9:59 h, infinite (10 s – 2 min, 10 s increments; 2 min – 10 min, 30 s increments; 10 min – 9:59 h, 1 min increments) Permissible density (at max rcf or rpm with maximum load): 1.2 g/mL Dimensions (WxDxH): 319 x 540 x 254 mm Weight: 30 kg Equipped with: 1x Eppendorf FA-45-48-11 biocontainment lid 1x Eppendorf FA-45-48-11 fixed angle rotor (max 12700 rpm; 48x 1.5 mL/2.0 mL micro test tube capacity)

For sale: Agilent G1960-61001 Control Board for LC/MS systems