Heraeus B 6060 57L

Sanyo CO2 MCO-175 Incubator This item was removed from a university laboratory where it was surplus  (more)to requirements. It is in fairly good used condition, showing signs of rust around the unit. It includes four shelves and a humidifying pan, with the door catch and seal both in good condition. The unit powers up and is in good working order (thermometer & co2 analyser not included). Specifications. - Model: MCO-175 - Serial No: 20606783

Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V Temperature Range -1 (more)0°C to +50°C Temperature Distribution Accuracy ±1.0°C (refrigerator in continuous operation at 37°C) Chamber Volume 286L Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W) - Interior light for better sample visibility (IN604W/804W) - Optional slide shaker table available to put in and take out samples easily (IN604W) Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Operating temperature range: -10~ + 50° C INCLUDED: The Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V includes: - 5 x Shelves w/ 10 Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V Temperature Range 5 (more)°C to 60°C Temperature Distribution Accuracy ± 0.5°C Chamber Volume 286L Features - Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration - 44% power savings compared to previous models - Controller upgraded for easier viewing and operability - Temperature distribution accuracy improved for better incubation - Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO2 emission monitor Programmable, eco-friendly 286L refrigerated incubator. Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration. Controller upgraded for easier viewing and operability. Improved temperature distribution accuracy for better incubation. Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO₂ emission monitor. Operating temperature range 0~ + 60°C. INCLUDED: The Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V includes: - 5 x Shelves w/ Brackets - 2 Keys - Silicon Stopper for Cable Hole - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

Sample preparation stirrer OHAUS Guardian 7000 Magnetic Hotplate Stirrers are designed with exceptio (more)nal safety features and top performance for every application. All models feature the unique SafetyHeatTM, an industry-leading internal protection system that ensures safety in heating applications through dual system integrity monitoring. The bright LCD display features intuitive icons, temperature, speed and duration settings, all designed to monitor performance from every corner of the lab. Numerous cutting-edge Ohaus features: - SmartHousing ™: Innovative chemical resistant, easy to clean design that allows you to channel potential spilt liquid samples away from internal components and the glass control panel. - SmartPresence ™ and SmartLink ™: they automatically turn off the heater if no user is detected after the 'time out' period set by the user or if the bluetooth no longer detects any smartphone connected. - SafetyHeat ™: two independent safety controls constantly monitor the electronics and turn off the heating to prevent overheating. - Powerful Motor: A solid magnet and software-controlled ramp speed ensure stirring accuracy from 60 to 1,600 rpm. for secure magnetic coupling for viscous applications. - SmartHeat ™ and SmartRate ™: set the maximum unit temperature and rapid or slow rates of temperature and speed change. The scheduling function allows the storage of five multi-stage programs. Available models: E-G71HS07C model with small square plate: 178 x 178 mm; flow rate of 15 litres; ceramic plate; heating up to 500°C. E-G71HS10C model with large square plate: 254 x 254 mm; flow rate of 18 litres; ceramic plate; heating up to 500°C. e-G71HSRDM model with round plate: 135Ø mm; flow rate of 20 litres; aluminium plate; heating up to 380°C. Applications Thermosensitive chemistry and biology, heat fixation, solution pH optimization, solution sterilization, endothermic reactions, denaturation of organic material, preparation of samples and solutions, buffers and solubilization reagents, preparation media, boiling Display Backlit LCD display for temperature, speed and time, green indicator lights during the heating and shaking phases, hob over-temperature indicator, icons for SmartRateTM, SmartHeatTM, SmartPresenceTM, SmartLinkTM, probe in use and Adjustment of a single point Operation and accessories included Mains cable (included), 20.3 cm (8 ') stainless steel RTD temperature probe, 3.8 cm (1.5') PTFE coated stir bar, protective hood in use Communication The USB port can be used to program repetitive applications and increase safety thanks to SmartLinkTM technology; the long-range user detection function operated via the OHAUS Bluetooth dongle accessory (sold separately) Structure Probe connection, SmartHousingTM is heat insulated and chemical resistant, IP21 rated, tempered glass front panel, control knobs, On / Off switch to disconnect the heater, integrated support rod holder, ceramic plate or in aluminium easy to clean Construction features Temperature indicator light, audible alarm, SmartHeatTM temperature limitation function, SafetyHeatTM stops the heater in the event of a malfunction, temperature calibration function for five probes and five plate setpoints, temperature priority function, SmartRateTM functions

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven STE-N 52 FALC

It allows the observation of samples without losing temperature.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz