HeraCell 150 Heraeus Incubator Lab

This Thermo Scientific MaxQ 6000 Incubator Shaker Model - 4360 was removed from a university la (more)b where it was surplus to requirements. The unit has a power board fault. It is in reasonably good cosmetic condition with some marks from use. The door also does not close properly. Internal dimensions - D52 x W55 x H67cm1 Shelf - 52 x 54cmShaker Plate - 45 x 45cm It is sold for spares or repairs due to the electrical fault.

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included). It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

This item has just arrived in our stock. Please enquire for further details.

Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C (at  (more)least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP750eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP750eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP750eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Unused demo product in original packaging. Great condition. 12 months warranty. Features: - User-fri (more)endly microprocessor control - Temperature setting in 0.1 °C
 steps - PID control with automatic troubleshooting during device preparation, for ensuring correct and accurate control at all times - Easy calibration with push buttons - Large, easily readable vacuum fluorescence display - Flexible racks allow efficient use of the chamber volume and can be easily removed for maintenance - Inner glass door allows observation of the samples without significant influence on the chamber temperature - Automatic overheating alarm - Cable bushing with large diameter (42 mm / 1,65 in) for data monitoring - RS232 port for data recollection - High performance security system mit double sensors for maintaining the required temperature during power outages for sample protection - Stainless steel chamber with rounded corners for easy mainenance - FCKW-free/FKW-free polyurethane foam for exceptional temperature values and condensation protection - Temperated door with intelligent energy management decreases condensation (also at lower temperatures) - Timer with week, day and realtime mode - Optional Programming of different temperature ramps Technische Daten: - Temperature range: 5 °C to 70 °C - Inner dimensions (W x H x D): 544 x 1335 x 524 mm - Outer dimensions (W x H x D): 778 x 1545 x 770 mm - Chamber volume: 381 liters - Number of racks included/max: 2/17 - Spatial temperature deviation at 20 °C: ≤ ± 0,3 °C - Temporal temperature deviation at 20 °C: ≤ ± 0,1 °C - Usable area: 0,56 m2 - Rack dimensions (W x D): 528 x 498 mm - Weight load capacity per rack: 30 kg - Weight load capacity device: 75 kg - Weight: 167 kg

Excluding connection gas kit (see pictures for kit)

Sony Solid-State Memory Camcorder Model-PMW-200 This item was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition, powers on, and has been tested with an in-house charger. Please note that it does not include a battery or charger. It will require the following to be operational: Sony BC-U1 or BC-U2 Charger/PSU.And a BP-U30/U60/90 battery pack.

BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 5 to 100ul Volume Range 5 to  (more)100 ul Accuracy 0.8% / 0.80 ul at 100 ul Pipette Type Air Displacement Features - Ergonomic design with adjustable finger rest for comfortable, fatigue-free pipetting - Multiple operating modes: standard pipetting, reverse pipetting, mixing, gel loading, and dispensing - Intuitive four-button control system with a clear digital display for easy operation - 360° rotating pipetting unit for customizable hand positioning and improved comfort - Easy Calibration technology enables quick, tool-free adjustment for maintaining accuracy - Autoclavable pipette shaft for convenient sterilization and contamination prevention - Effortless tip mounting and ejection with minimal force required due to O-ring design - Long-lasting NiMH battery supports over 4,000 pipetting cycles per charge - Continuous use during charging with a 1-meter charging cable - Battery Refresh function extends battery life and optimizes performance The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 5 to 100ul combines advanced functionality with ergonomic design to deliver precise and efficient liquid handling for multi-sample workflows. Its adjustable volume range of 5 to 100ul and 12-channel configuration make it ideal for applications requiring high throughput and accuracy. The pipette supports partial volumes of 100ul, 50ul, and 10ul, with an accuracy of 0.8% at 100ul and a coefficient of variation as low as 0.25%, ensuring consistent and reproducible results. Engineered for user comfort, this pipette features a lightweight, balanced design and intuitive controls, reducing strain during extended use. The 360-degree rotating pipetting unit accommodates individual user preferences, while the Easy Calibration technology simplifies adjustments for maintaining peak performance. The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 5 to 100ul is a dependable choice for laboratories requiring precision, versatility, and productivity in liquid handling tasks.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 5 to 100ul includes: - 1 x TipBox - 1 x TipRack Refill Pack - Device Stand - Rechargeable Battery - Power Adapter - Reagent Reservoir - Assembly Aid - Grease - 1 Set of Sealing Rings - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

M1 Mass Standard - knob weights - set (1 g - 200 g), wooden box.

M1 Mass Standard - knob weights. Nominal value - 2 kg.