Genlab Prime PRI/150 Laboratory Incubator Lab

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the rear wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2008 Tested at 37 ° C and -10 ° C Front sheet metal slightly deformed

Unused demo product in original packaging. Great condition. 12 months warranty. Features: - User-fri (more)endly microprocessor control - Temperature setting in 0.1 °C
 steps - PID control with automatic troubleshooting during device preparation, for ensuring correct and accurate control at all times - Easy calibration with push buttons - Large, easily readable vacuum fluorescence display - Flexible racks allow efficient use of the chamber volume and can be easily removed for maintenance - Inner glass door allows observation of the samples without significant influence on the chamber temperature - Automatic overheating alarm - Cable bushing with large diameter (42 mm / 1,65 in) for data monitoring - RS232 port for data recollection - High performance security system mit double sensors for maintaining the required temperature during power outages for sample protection - Stainless steel chamber with rounded corners for easy mainenance - FCKW-free/FKW-free polyurethane foam for exceptional temperature values and condensation protection - Temperated door with intelligent energy management decreases condensation (also at lower temperatures) - Timer with week, day and realtime mode - Optional Programming of different temperature ramps Technische Daten: - Temperature range: 5 °C to 70 °C - Inner dimensions (W x H x D): 544 x 1335 x 524 mm - Outer dimensions (W x H x D): 778 x 1545 x 770 mm - Chamber volume: 381 liters - Number of racks included/max: 2/17 - Spatial temperature deviation at 20 °C: ≤ ± 0,3 °C - Temporal temperature deviation at 20 °C: ≤ ± 0,1 °C - Usable area: 0,56 m2 - Rack dimensions (W x D): 528 x 498 mm - Weight load capacity per rack: 30 kg - Weight load capacity device: 75 kg - Weight: 167 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gallenkamp Cooled Orbital Shaking Incubator INR-250 This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order (digital thermometer not included). It is in reasonable cosmetic condition but has marks from use.

Thermo Cytomat 2 C-LIN Automated Incubator Lab This item was removed from a university where it was  (more)surplus to requirement. The unit has been professionally serviced and is in full working order. The full-service report is available on request. This item also includes the following: 14 x Cytomat P35 Microplate Racks. 1 x Microscan MS-3-Laser BAR Code Scanner - Type FIS-0003-0007G.

Memmert IF750plus Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications. Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments. INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Labconco 20-Port ManifoldManifoldincludes 20 neoprene valves with molded plastic knobs that accommod (more)ate both1/2" and 3/4" adapters for connection of flasks.Manifolds aremade of type 304 stainless steel and mount atop FreeZone Freeze Dryers. INCLUDED: The Labconco 7522300 20-Port Manifold includes: - Neoprene Valves x 20 (accomodates 1/2" & 3/4" adapters) - Manufacturer's Documentation - 1 Year Manufacturer's Warranty