Gallenkamp incubator

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2022 Tested at 37 ° C and -2 ° C

This Labnet Vortemp 56 Microplate Shaking Incubator was removed from a university lab where it was s (more)urplus to requirements. The item powers on and runs up to 120rpm. It was tested with a digital thermometer (not included).When the temperature was set to 37˚c, the thermometer read 35˚c.When the temperature was set to 99.5˚c, the thermometer read 94˚c.Both temperatures were reached relatively quickly. It holds 56 x 2.0ml tubes. The item is in reasonably good used cosmetic condition with marks and scratches.

Sanyo MIR-253 Cooling Laboratory Incubator This item was removed from a university lab where it was  (more)surplus to requirements. It is in reasonably poor cosmetic condition with noticeable damage. Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

This Heraeus HERAcell 150 CO2 Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirement. The unit has been professionally serviced and is in good working order. A report is available on request. It is in good cosmetic condition with minor marks.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. The inner door hasn't been tested as it requires compressed air but we see no reason why it would not work with the correct air setup. There are no gloves included. It is in good cosmetic condition with minor marks. Internal dimensions- D57.5 W105 H47cmShelf - 104 x 25cmRight chamber - D29 W33 H30cm

Memmert IN110plus Natural Convection Incubator 108L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 108 L (3.8 cu.ft.) for versatile applications - Precise temperature control with 0.1°C setting resolution using 2 Pt100 sensors DIN Class A in a 4-wire circuit - ControlCOCKPIT with TwinDISPLAY offers advanced PID-microprocessor control and two high-definition TFT-color displays - Natural convection with adjustable pre-heated fresh air admixture through electronically controlled air flap - Digital timer with backwards counting, adjustable from 1 minute to 99 days - Two stainless steel, electropolished grids, with a max chamber load of 385 lbs (175 kg) - AtmoCONTROL software for data logging and program management via USB or Ethernet interface The Memmert IN110plus Natural Convection Incubator 108L, 115V offers precision and reliability for a wide range of temperature-sensitive applications. With a spacious 108 L (3.8 cu.ft.) stainless steel chamber, this incubator is designed for natural convection heating, ensuring consistent and uniform temperature distribution throughout the chamber. Its advanced ControlCOCKPIT system with TwinDISPLAY and high-definition TFT-color screens allows for easy adjustments of temperature, air flap position, and timer settings. The temperature range spans from +20 to +80°C with an impressive 0.1°C resolution, delivering exceptional control and stability, aided by two Pt100 sensors in a 4-wire circuit that monitor temperature with accuracy. This incubator also features a digital timer adjustable from 1 minute to 99 days, making it ideal for long-duration experiments. It includes AtmoCONTROL software, providing seamless data logging and program management via USB or Ethernet interfaces. The interior is designed for ease of cleaning and durability, with two stainless steel grids capable of supporting up to 385 lbs. Safety is paramount with integrated overtemperature protection and an autodiagnostic system that alerts users visually and audibly in case of any issues. INCLUDED: TheMemmert IN110plus Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: stainless steel wire Nominal value: 50 mg Material: stainless steel High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Gilson PIPETMAN G Pipette SetFeatures - Made of PVDF and stainless steel, PIPETMAN Goffers premium d (more)urability - One of the lowest pipetting forces commercially available - Redesigned piston assembly system and high-quality piston grease,PIPETMAN G guarantees hours of comfortable pipetting. - N G clipejector allows for convenient access to serviceableparts. - Pipettes come in either single or multichannel models equipped with metaltip ejectors - 3 Year Manufacturer's Warranty