Gallenkamp Cooled Orbital Shaking Incubator INR-250 Lab

Gallenkamp Economy Incubator Size 1 This item was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in good cosmetic condition. It was tested with a digital thermometer (not included). It is in good working order.

PHCBI Cooled Incubator Model Type MIR-154 Labs This item was removed from a university where it was  (more)surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally. This item requires a passcode to operate, which is available on request.

FIRLABO BCR240 refrigerated oven/incubator with forced convection refrigerated incubator FROILABO /  (more)FIRLABO Model: BCR 240 Capacity: 223 / 240 liters Temperature range: 0°C to 65°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 153 cm 4 perforated stainless steel shelves, non-tilting On self-locking casters 230 V / 50/60 Hz 1500W Weight: 114 kg Year of manufacture: 2005 Tested at 0°C and 37°C

Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V Temperature Range 5 (more)°C to 60°C Temperature Distribution Accuracy ± 0.5°C Chamber Volume 286L Features - Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration - 44% power savings compared to previous models - Controller upgraded for easier viewing and operability - Temperature distribution accuracy improved for better incubation - Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO2 emission monitor Programmable, eco-friendly 286L refrigerated incubator. Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration. Controller upgraded for easier viewing and operability. Improved temperature distribution accuracy for better incubation. Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO₂ emission monitor. Operating temperature range 0~ + 60°C. INCLUDED: The Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V includes: - 5 x Shelves w/ Brackets - 2 Keys - Silicon Stopper for Cable Hole - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C  (more)(at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP750ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP750ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP750ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA INC 125 FS SP25 Digital Incubator Shaker Temperature Range Ambient +8°C to 80°C Speed Range 10  (more)to 300 RPM Chamber Volume 125L Features - Shaking stroke: 25 mm for optimum oxygen input - The shaker platform can be pulled out halfway (with line indicator) for comfortable and tilt-proof loading - The threaded grid on the platform allows the mounting of fixing clips or STICKMAX adhesive mat for different vessels and sizes - When the door is opened, the shaking function stops automatically - Shaking and temperature control function can be used independently of each other - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode for disinfection and reduction of cross-contamination (100/120°C) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber and triple-glazed door with window - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) - Very large LCD display for easy reading - Large viewing window and switchable interior lighting for observation of samples - Counter, timer, and timer auto (temperature-controlled) function to ensure reproducible test conditions The IKA INC 125 FS SP25 Digital Incubator Shaker is the first incubator shaker with a patented removable shaker platform. Without the platform, the unit can be used like a normal incubator. The large inner chamber with a volume of 125 liters offers space for up to 6 grid shelves (without shaker platform). Thanks to high temperature stability and a uniform shaking motion that improves oxygenation, the incubator shaker is the perfect solution for cell cultivation and other microbiological applications. Click Here to View Product Video INCLUDED: The IKA INC 125 FS SP25 Digital Incubator Shaker includes: - Shaker Platform SP25 - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Varian HS 602 Two Stage Rotary Vane Vacuum Pump This item was removed from a university lab where it (more) was surplus to requirements. It is in very good cosmetic condition and powers on, we are unable to conduct further at our facility.

A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) Capacity 220 g Re (more)adability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-alert visually and audibly indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Internal Auto calibration or with easy one-touch button - performs and documents internal calibration - Password-Protect – offers password-protection up to 11 users and 1 administrator - GLP/GMP/GCP Compliance with full calibration reports - Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF | REZERO, CAL, MODE, SAMPLE, PRINT, TARE - Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility - Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional) - Stainless steel pan and dust-plate can be easily removed for cleaning - Die-cast aluminum housing provides extra stability and durability - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), delivers precision in regulated environments with its 220 g capacity and 0.0001 g readability. This balance is NTEP certified, ensuring compliance and accuracy for legal-for-trade applications. It enhances productivity with a fast stabilization time of approximately 2.0 seconds and supports stringent compliance needs, including USP41, with features that alert users when sample sizes fall below minimum requirements, effectively reducing waste and increasing efficiency. Designed to simplify routine checks and increase operational efficiency, the GX-224AN includes an Electronically Controlled Load (ECL) management system. This system performs repeatability testing and automatic precision checks internally without the need for external weights, thereby enhancing the reliability of measurements. The balance is equipped with six straightforward keys and offers a quick toggle switch between USB and RS-232C communication options, facilitating seamless integration into existing data management systems. For ease of use, the GX-224AN features an illuminated, front-mounted level that ensures quick and accurate leveling, even when operators are wearing gloves. It incorporates automatic self-calibration and one-touch internal/external calibration, guaranteeing valid results every time. The balance's robust construction and comprehensive measurement capabilities—including percent calculation and piece counting—make it ideal for a wide range of scientific applications. This analytical balance, with its precise measurement technology and legal-for-trade certification, stands as an excellent choice for professionals requiring dependable, high-performance tools in regulated settings. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 10L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing our Yamato Programmable Vacuum Drying Oven, a compact and versatile solution ideal for laboratory settings. This 10L, 115V oven offers advanced features designed to enhance safety and efficiency. With easy parameter input and a digital PID controller supporting various temperature modes, including fixed temperature, quick auto-stop, auto-start, and program operations, your experiments will run smoothly. Safety is paramount with self-diagnostic and overheating prevention functions, while the silicon rubber door seal ensures an airtight chamber. Individual overheating prevention devices for each circuit add an extra layer of protection, and the oven is customizable with N₂ gas inlet and communication ports. Plus, the calibration offset function ensures precision, and easy maintenance keeps your equipment in top condition. Safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, and temperature measurement error prevention.INCLUDED: The Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V includes: - Shelf Plate (2 pcs.) - Power Cord - One Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor The Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor  (more)accommodates a capacity of up to 12 x 1.5 / 2.0 ml. This rotor is designed for use with Ohaus FC5718, FC5718R, and FC5830R series centrifuges. The Ohaus 30314839 Fixed Angle Rotor reaches a maximum speed of 30,000 RPM and a maximum Relative Centrifugal Force of 65,395 x g. INCLUDED: The Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor includes: - Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo DYNEO DD-450F Refrigerated Circulator with Digital Output and Natural Refrigerant (R290), 115 (more)V/60Hz Refrigerant R290 Working Temperature Range -30°C - 200°C Cooling Capacity 440W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-450F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.44kW cooling power at 20 °C with 60W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-450F Refrigerated Circulator with Digital Output and Natural Refrigerant (R290), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty