Hygiena Incubator

Manufacturer: Memmert Model: BE 600 Incubator w/ 3x Support Perforated Shelves and Digital Precisio (more)n Reference Thermometer S/N: e697.0271 Description:  Memmert BE 600 is a precision incubator with internal double glass doors, nominal temperature of 70 °C and capacity of 256 Liter. It is particularly suitable for biochemical investigations, hematological examinations and microbiological examinations. It can also be used for stability testing, quality testing and bacterial growth. In addition, this incubator is equipped with three perforated shelves. Specifications: - Nominal Temperature: 70 °C- Capacity: 256 Liter- Protection Class: DIN 40050 - IP 20- DIN12880-Kl.: 3.1- Power: 230 V 7 A 50/60 Hz 1600 W- External Dims: 1000 x 800 x 950 mm- Internal Dims: 800 x 500 x 650 mm Items delivered: - Memmert BE 600 Incubator w/ 3x Support Perforated Shelves and Digital Precision Reference ThermometerCondition: The Incubator is in excellent cosmetic as well as working condition. It is 100% functional tested and ready to be operated.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sartorius Certomat BS-1 Double Stack Shaking Incubator This item was removed from a university labor (more)atory where it was surplus to requirements. Both incubator units are in good used cosmetic condition and power on, but each has functional issues:- Top Unit: Heats up as expected but does not shake. - Bottom Unit: Powers up but displays an error message in German on startup and continuously loops the startup sequence. Efforts to troubleshoot both units were unsuccessful, and therefore are sold as Spares/Repair.

Sanyo MCO-20AIC C02 Incubator This item was removed from a university where it was surplus to requir (more)ement. The unit powers up and is in good working order (thermometer and CO2 sensor not included). It is in good cosmetic condition internally and externally. Internal dimensions are as follows:L57cm x W45cm x H66cm. Features:2 x Shelves

Hygiena Digital Dry Block Mini Incubator.  Rango de temperatura de ambiente + 5ºC a 80 ºC. Stability (more) ±0,5 ºC. Heats to max temp in less than 15 minutes. Volumetric capacity of small tube incubator blocks = 1,5mL. Timer range: 1 min - 99 hr 59 min .Small Format (WxDxH): 11*15*8 cm; 0,5 kg Designed specifically for Hygiens'a wide variety of test devices.

Memmert IN30plus Natural Convection Incubator 32L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L (1.1 cu.ft.) stainless steel chamber for efficient and durable sample storage - Precise temperature control with an adjustable range from +20°C to +80°C, ensuring consistent performance even 5°C above ambient - Dual Pt100 sensors in a 4-wire circuit deliver reliable monitoring and safety redundancy - Intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller for enhanced user experience - Natural convection for uniform temperature distribution, perfect for sensitive applications - Electronically adjustable air flap provides optimized pre-heated fresh air admixture for sample protection - Maximizes productivity with a chamber load capacity of 132 lbs, supporting heavier samples - Built-in AutoSAFETY and autodiagnostic systems ensure worry-free operation and advanced protection The Memmert IN30plus Natural Convection Incubator 32L, 115V offers precise and reliable temperature control for sensitive sample incubation. With a setting temperature range of +20°C to +80°C and working capability 5°C above ambient, this compact 32 L stainless steel chamber is ideal for a variety of laboratory needs. Equipped with dual Pt100 sensors in a 4-wire circuit, it ensures accurate monitoring and safety through redundancy. The TwinDISPLAY ControlCOCKPIT with an adaptive PID-microprocessor controller provides intuitive user control, while the natural convection system ensures uniform temperature distribution throughout the chamber. Designed for efficiency and user convenience, the incubator features an electronically adjustable air flap for the precise admixture of pre-heated fresh air. With a maximum chamber load of 132 lbs, it supports high-capacity sample handling. The Memmert IN30plus also includes advanced safety features, such as AutoSAFETY, an overtemperature monitor, and an autodiagnostic system, ensuring continuous and secure operation. This high-performance incubator is a dependable solution for labs seeking consistent results and easy operation. INCLUDED: TheMemmert IN30plus Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The Nucleofector technology is a major improvement of the well known electroporation technology. The (more) Nucleofector technology involves a combination of optimized electrical parameters and specific Nucleofector solutions for different cell types. This combination permits the crucials step: delivery of the DNA of interest straight into the nucleus. As the DNA quickly reaches the nucleus, expression can begin without delay. The nucleofected cells are thus ready for analysis after a short incubation time of only 2 – 8 hours. DNA quality: 1 – 5 µg plasmid concentration per nuclefection sample (100 µl), plasmid concentration can be increased up to 10 µg per sample. This may lead to higher gene transfer efficiencies, but at the same time may increase mortality of the cells. Cell density: 2 x 105 – 1 x 107 cells per nuclefection sample for suspensions cells 2 x 105 – 2 x 106 cells per sample for adherent cells Cell densities of < 2 x 105 cells per smaple are not advisable beacause the gene transfer efficiency may decrease and mortality may increase. Dimensions (WxDxH): 300 x 230 x x110 mm Weight: 2.5 kg

1.6 mm tubing 3 rollers

VACUUBRAND PC 611 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible result - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - PC 611 Select allows simultaneous operation of two independent vacuum applications with electronic vacuum control This chemistry vacuum pumping unit is an economic space-saving solution for simultaneous operation of two independent vacuum applications with one single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 611 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity for parallel operation of two demanding applications. One application is controlled by the VACUU-SELECT vacuum controller, via an electronic solenoid valve. The second application is controlled by a manually controlled diaphragm valve. Both vacuum ports have integrated check valves to protect against cross contamination and interference. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it detects the boiling pressure and switches to 2-point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage, and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. INCLUDED: The VACUUBRAND PC 611 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HX7 H scale&rsquo;s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today &ndash; that&rsquo;s the multifunctionality. That&rsquo;s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices &ndash; thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7&rsquo;s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.