Eppendorf New Brunswick Innova 44R Refrigerated Incubator Shaker Inkubator Schüttler

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This LMS Cooled Benchtop Laboratory Incubator was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested with a digital thermometer (not included) The dial was set to the minimum of 0 and it dropped as low as -6˚c after running for a few hours.When the dial was set to maximum, the thermometer read 42.7°c after running for around 6 hours. The item is in a reasonable, used cosmetic condition with some minor marks from use. Internal dimensions - D33 W45 H53cm

Memmert IF260 Forced Circulation Incubator 256L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 256 L (9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 256 L (9 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF260 Forced Circulation Incubator 256L, 115V offers precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its spacious 256 L (9.04 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning, making it ideal for various lab applications. Equipped with the ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller and a high-definition TFT-color display, it allows users to fine-tune parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time for optimal control and efficiency. This incubator features forced air circulation powered by a quiet air turbine, adjustable in 10% increments, with a pre-heated fresh air admixture for enhanced performance. Safety mechanisms include an adjustable overtemperature monitor and mechanical temperature limiter TB, ensuring protection according to DIN 12880 standards. The IF260 also supports AtmoCONTROL software for programming and data management. With the ability to handle a maximum chamber load of 661 lbs across 9 shelves, this incubator combines precision, safety, and functionality for a wide range of laboratory requirements. INCLUDED: The Memmert IF260 Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 749 L (26.4 cu. ft.) Features - Temperature range from -12°C to +60°C with optimal performance between +16°C and +34°C - Large capacity of 749 L (26.4 cu. ft.) to accommodate high-volume storage - Equipped with an inner glass door for clear visibility while maintaining chamber integrity - Precise temperature control with 0.1°C setting accuracy and dual Pt100 sensors for mutual monitoring - Energy-saving CFC-free cooling and heating system (R134a refrigerant) with efficient automatic defrosting - TwinDISPLAY control system with dual high-definition TFT displays and multilingual settings - AutoSAFETY system with integrated over- and undertemperature protection to ensure safe operation - Constructed with a durable, corrosion-resistant stainless steel interior and zinc-plated steel housing The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V offers advanced temperature control within a spacious 749-liter chamber, making it ideal for applications requiring precise cooling and heating cycles. With a temperature range of -12°C to +60°C and optimal performance at ambient temperatures between +16°C and +34°C, this unit accommodates a variety of temperature-sensitive materials. The incubator features an inner glass door, allowing clear visibility while ensuring the integrity of the chamber’s environment. Designed with dual Pt100 temperature sensors in a 4-wire circuit, it provides reliable monitoring and backup functions to maintain accuracy within 0.1°C. Equipped with Memmert’s TwinDISPLAY technology, the ICP750 offers easy adjustments through dual high-definition TFT displays and supports multiple languages. Its energy-efficient, CFC-free cooling and heating system with R134a refrigerant, coupled with an automatic defrost function, ensures optimal temperature management. Safety is prioritized with the integrated AutoSAFETY system, which offers over- and undertemperature protection and visual and acoustic alarms for maximum operational security. Constructed from durable stainless steel with a zinc-plated rear housing, the ICP750 embodies both functionality and resilience, making it a reliable choice for high-demand laboratory environments. INCLUDED: The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA INC 125 F Digital Incubator Temperature Range Ambient +8°C to 100°C Temperature Uniformity ± 0. (more)3 K Chamber Volume 125L Features - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode (120°C) for disinfection and reduction of cross-contamination - Wide temperature range: RT +8°C to 100°C - Excellent temperature stability and uniformity of +/- 0.3 K - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) and ventilation flap (0-100%) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber - Additional inner glass door for observation of samples without temperature loss - Very large LCD display for easy reading - Counter, timer and timer auto function ensure reproducible test conditions The IKA INC 125 F Digital Incubator is ideal for microbiological applications up to 100°C thanks to its precise temperature control. The supply of preheated air into the temperature chamber can ensure fast, stable, and uniform temperature control. With a capacity of 125 liters, INC 125 F digital offers the largest volume in its class. Up to six grid shelves can be accommodated simultaneously in the spacious chamber. Click Here to View Product Video INCLUDED: The IKA INC 125 F Digital Incubator includes: - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood  (more)Speed Range 150 to 1,350 RPM Temperature Range Ambient +5°C to 65°C Platform Size 290 x 258 mm Features - Used for research requiring rigid or gentle shaking on microtiter plates or test tubes - Includes safety features, ease of use, and increased efficiency - Insulated system prevents heat transfer from the motor, safeguarding samples - Suitable for the modular incubator system with variable temperature control up to 65°C - Medium-sized model with a load capacity of 5kg - Accepts 6 microtiter plates for increased throughput - 1.5mm vibration orbit for gentle mixing with small sample volumes - Analog process timer for unattended operation (1 to 120 minutes) - Acoustic alarm and automatic stop after the set time expires - Variable speed control (150 to 1,350rpm) via analog knob This Tritramax package includes one vibrating platform shaker Titramax 1000, one heating module and one flat incubator hood. Titramax 1000, the incubating model platform shaker, is used for research which requires ridged or gentle shaking for small samples on microtiter plates or test tubes. Includes all standard features for safety, ease of use and increased efficiency. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control of up to 65° C. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. It is a medium sized model and accepts load capacities of 5kg. The use of 6 microtiter plates increases your throughput by 50%. The 1.5mm vibration orbit performs gentle mixing with best results using small sample volumes. The analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped. Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350rpm. The small incubator hood comes with a total height of 163mm and is recommended especially for microtiter plates, culture plates, small flasks, media bottles and Erlenmeyer flasks up to 100ml. The transparent and non-fogging PETG material allows for sample viewing and is easily cleaned. Click Here to View Product Video INCLUDED: The Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood includes: - Titramax 1000 Shaker - Heating Module - Flat Hood - Power Cord - Three Year Manufacturer's Warranty

This listing is for a Hanna Conmet 1 Pocket Portable Conductivity Tester. The unit is in full worki (more)ng condition and is ready for immediate release. Hanna Conmet 1 Pocket Portable Conductivity Tester Experience precision on-the-go with the Hanna Conmet 1 Pocket Portable Conductivity Tester, your compact solution for measuring water conductivity with ease! Key Features: Measurement Range: Accurately measures conductivity from 0 to 1999 µS/cm with a resolution of 1 µS/cm. Reliable Accuracy: Ensures dependable results with an accuracy of ±2% Full Scale. Automatic Calibration: Simplifies the calibration process with automatic adjustments at 1413 µS/cm. Temperature Compensation: Features automatic temperature compensation from 0 to 60°C (32 to 140°F), with a coefficient of 2%/°C, ensuring accurate readings in varying conditions. Long Battery Life: Powered by 2 x 1.5V batteries, it boasts approximately 200 hours of usage, complemented by an auto-off feature after 5 minutes of inactivity. Compact Design: Measures 180 x 50 x 25 mm and weighs only 50 grams, making it highly portable. Ideal Applications: Water Quality Testing: Perfect for assessing the conductivity of drinking water, water conditioning, and reverse osmosis systems. Field and Laboratory Use: Its lightweight and compact design make it suitable for both fieldwork and lab environments, allowing for versatile application.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unrivalled functionality in a line of high-performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Parts Counting, Percent Weighing, Checkweighing, Animal/Dynamic Weighing, Filling, Totalization/Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC Display 5.7" (145 mm) Full-color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232/Ethernet (accessories sold separately) . GLP/GMP data output with real-time clock. Construction Metal base, ABS top housing, stainless steel pan, glass draftshield with top mounted side doors & flip/sliding top door, illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, 4 touchless sensors, in-use cover Design Features Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, auto standby, up to 14 operating languages Technical features: Internal Calibration: AutoCal™ - Automatic Screen: Included Lid in use: Included Linearity: ±0.0002g Minimum weight according to (USP, 0.1% typical): 0.16g Repeatability (typical): 0.0001 g Stabilization time: 2 s Tare range: to flow by subtraction

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 2 kg.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Gilson F174101 AmpliPur Expert Tips, 0.5-10uLThe Gilson F174101 AmpliPur Expert Tips, 0.5-10uL are I (more)SO 8655 compliant and provide a significant value for the money spent. They are manufactured according to the certified Gilson quality standard and preserve your sample integrity. These filter tips protect precious samples and your pipettes from cross-contamination and are designed to fit various pipette brands. AmpliPur Expert Tips are certified DNase- and RNase-free. It makes them the preferred tool for molecular biology applications, supporting you in ensuring the limit of detection of your experiment, resulting in more sensitive nucleic acid quantitation. INCLUDED: The Gilson F174101 AmpliPur Expert Tips, 0.5-10uL includes: - 10 Racks of 96 Filter Tips - 3 Year Manufacturer's Warranty