Eppendorf CellXpert C170i CO2 Incubator

This Sanyo CO2 MCO-20AIC Laboratory Incubator was removed from a university lab where it was surplus (more) to requirements. The unit is in good working order but will need to be calibrated upon installation. It is in good cosmetic condition with minor marks from use. Item is supplied with 3 shelves. Internal dimensions are L58cm x W45cm x H66cm.

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

APPLIGENE Hybridisation Incubator Hybrid Hybridisation Oven Hybridisation Oven Model: Hybrid 91 500W (more) RPM: 6 Stainless steel interior Door with glass window For tubes up to 300mm long Viewing window In excellent condition Tested at 37°C

The STX44-HRSA is designed for integration where the instrument is located on the floor. The STX44-H (more)RSA incubators have their handling and climate controls on the lower part of the instrument. The robotic access Gate is located in the upper part of the housing. The SA configuration does not require table space and an SA configured StoreX can easily be put in position without the need of placing the unit on a table. Application: Humid MultiRange Temperature Range: 4 – 50/70°C (depending on humidity) Temperature Stability: ± 0.3°C Relative Humidity: 90 – 95% Communication: RS232 V24, 9600 Baud, ASCII Dimensions (WxDxH): 485 x 514 x 1230 mm Transfer height: 1000 mm Plate capacity: Microtiter 44, Deep well 18, Nanoliter 84

Fungilab Thermovisc 100-F8 Refrigerated Re-Circulation Thermostat. Working volume 8 L. Range -10 to  (more)+ 100 ° C. Integrated cooling unit for measurement at 20 ° C without external cooling by circulating water. Stability ± 0.05 ° C to 100 ° C and ± 0.1 ° C to -10 ° C. Construction adapted to the rotary viscometer Fungilab: the measuring head fits perfectly on the sample holder. Integrated support for 2 beakers 600 mL. Opening 94 mm with locking device. Used to thermostate a second sample while measuring on the first. User manual.

Additional LCD display in plastic housing and on a stand. The display enables presentation of the we (more)ighing result in a place distant from the balance workplace. It features an additional information line which allows to display additional messages and data.

System consisting of: Gilson GX-281 sample robot 2 Gilson 6 position valves 2 Gilson 306 pump Gilson (more) 322 pump

The Leica DM500 microscope with “plug and play” capability is the ideal tool to make teaching entry- (more)level college and university Life Science courses easy and fun for the instructor and the student. Student-friendly features such as the pre-focused, pre-centered condenser and the EZTube preset diopter, which prevent incorrect adjustments, provide more time for hands-on teaching. EZStore design with integrated handle and cord wrap allows easy carrying, easy lifting and protection against microscope component damage. Head: Binocular Eyepiece: Leica HC PLAN s 10x/20 fixed Objectives: PLAN 4x/0.10, PLAN 10x/0.22, HI-PLAN 40x/0.65 PH2, HI-PLAN 100x/1.30 Oil PH3 Final Magnifications: 40x, 100x, 400x, 1000x Magnification changer: 4 position Focusing: Coaxial focus controls; self-adjusting focus mechanism; 300 micros per fine focus rotation; calibrated in 3 micro increments Illuminator: LED illuminator Camera: Leica ICC50 W Modes: SD mode, USB mode, WiFi mode, Ethernet mode Exposure time: 1 msec – 500 msec Live image: 30 fps (depends on mode and resolution setting) Full frame image acquisition: 5.0 megapixels max.