Elbanton ETK 60 spec Refrigerated Incubator

Temperature Range: Ambient +5°C to 50°C CO2 Concentration Range: 0 to 20% CO2 Sensor Technology: TC  (more)Sensor Relative Humidity: <90% at 37°C Humidity Source: Water Pan Lighting: LED Capacity: 40 L Chamber Material: Polished Stainless Steel Interior Dimensions (DxWxH): 355 x 305 x 355 mm Dimensions (LxWxH): 597 x 470 x 465 mm

Temperature range: +5°C above ambient to 70°C Temperature uniformity (at 37°C): ±0.5 K Temperature f (more)luctuation (at 37°C): ±0.3 K Heating up time to 37°C: 230 min Recovery time after door was opened for 30 s at 37°C: 15 min Interior volume: 62 L Permitted load: 45 kg Load per rack: 15 kg Internal dimensions( WxHxD): 400 x 440 x 350 mm Dimensions (WxHxD): 614 x 625 x 577 mm Net weight of the unit (empty): 35 kg

Temperature control range: Ambient +5°C to 60°C Temperature fluctuation: ± 0.5°C Temperature variati (more)on: ± 1°C Capacity: 93 L Timer: Electronic timer with delay timer Dimensions (WxDxH): 580 x 595 x 820 mm Internal dimensions (WxDxH): 450 x 460 x 450 mm Weight: 44 kg

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to +70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 45 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Capacity of 2 agitator trays; for containers over 150 mm only 1 tray can be used - Temperature stability ± 0.2°C - Shaking frequency: 20 to max. 250 min-1 - Stirring width: 30 mm - Usable volume 45 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Amplitude of shaking 25 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 300 mm - Capacity approx. 45 L / 2 stirring trays - External structure in electrolytically galvanized steel sheet, powder coated

Elix Advantage systems have been designed to deliver the highest pure water quality for your regular (more) laboratory applications and instrument feed. The systems also complies with the purified water requirements from the US, Japanese and European Pharma providing consistent, reliable pure water. Combining the patented Elix electrodeionization technology with the most advanced purification technologies, the Elix Advantage system uses potable tap water as feed to produce consistent, high quality pure water for all your lab’s needs—saving you time and money. The system provides pressurized, bacteria-free pure water through the E-POD (Elix Point-of-Delivery) units. Water quality: Type 2 Feed water nature: Potable tap water Flow rate: 5 L/h Daily product water usage: 100 L/day Product water particulates: < 1 unit/mL (particulates >0.22 μm – with Millipak or Biopak point-of-use filters) Product water DNase: < 5 pg/mL (with Biopak Polisher) Product water microorganisms: < 0.1 CFU/mL (with Millipak or Biopak point-of-use filters) Product water pyrogens: < 0.001 EU/mL (with Biopak Polisher) Product water RNase: < 1 pg/mL (with Biopak Polisher) Distribution flow rate: Up to 2 L/min from POD Product water resistivity at 25°C: > 5 MΩ·cm (Typically 10 – 15 MΩ·cm) Product water TOC: < 30 ppb Dimensions (HxWxD): 500 x 332 x 484 mm Operating weight: 17.2 kg Including: Millipore 60 Liter PE water storage tank Excluding: New filters

This listing is for a Brand New Harvest Right Medium Pharmaceutical PRO Freeze Dryer sold through UL (more)Mfreezedryers.comWe are stock holders in UKPrice Before VAT - £4500Both long term and short term rental available.Weekly £500+ transportMonthly £1500 + transportHarvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh.Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency.What’s IncludedMedium Pharma Freeze DryerPremier Vacuum PumpVacuum Pump OilOil FilterStainless Steel Trays (set of 7)Guide to Freeze DryingKey Features & Benefits- The freeze dryer has built in intelligence. It automaticallyand perfectly manages the freeze drying process- The ideal vacuum pressure and drying temperature is maintainedfor each material – preserves freshness and potency- 6.5 square feet of tray space- Shelving unit holds 7 trays (each tray 190.5mm W x 457.2mm L x19mmH)- 4 liters of ice capacity Warranty1 Year international warranty provided by Harvest Right. DimensionsOverall product dimensions: 660mm W x 540mm D x 724mm HPerfect for a counter top, cart or table. Weight 58Kg PowerStandard UK 230v Shipping Info- The medium pharmaceutical freeze dryer ships in one packagewith a total weight of 160KG- Item will be delivered in international shipping crate (mustbe purchased from Harvest Right when exporting machines out of USA)- One freeze dryer in fully encased shipping crate: 920 x 770 x1500H - If you would like to collect from site, we would be able tocut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box ofparts MaintenanceSimply filter and replace oil. Takes one or two minutes. Industrial Grade DesignHigh quality, super high vacuumHigh evacuation performanceLight, fast, energy efficient Technical SpecificationsOil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil orJB Industries Black Gold Vacuum Pump Oil OnlyDC MotorEnergy EfficientVoltage: Standard, 230vDimensions: 410mm W x 152mm D x 307mm HWeight: 6.57KGNoise: 52 decibels Product ComparisonIndustrial Oil Pump vs Standard Oil Pump Oil ChangesThis new Industrial Pump rarely needs to have the oil changed orfiltered. The pump has a gas ballast feature that makes it so water does notstay in the oil. Because of this, the oil in the pump will be pristine andclear, even after 30 or more batches. You simply won’t need to change the oiluntil you have run 25 to 40 batches. Whereas, the oil in the standard vacuumpump needs to be changed and filtered every 4 or 5 batches (when using the new3/8 inch vacuum hose). Vacuum PressureUnder cold and hot conditions the Industrial Pump will pull adeeper vacuum than the Standard Pump. Under cold conditions the difference is.05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump.Whereas, under warm conditions the difference is much greater: .05 Pascal forthe Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especially not affected by warm,ambient conditions. When temperatures rise, it will pull a vacuum far betterthan the Standard Pump. The Industrial Pump is just not affected by outsideheat. It pulls the same deep vacuum even when it is in a warm environment. NoiseThe Industrial Pump is substantially quieter than the StandardPump, 52 decibels versus 64 decibels. The Industrial Pump at 52 decibels isabout the same as a refrigerator. Oil Mist FilterBoth pumps come with an oil mist filter. However, the IndustrialPump’s oil mist filter allows for no oil spray at all and it will last muchlonger. Power UseThe Industrial Pump uses less power than the Standard Pump (187watts versus 218 watts). AmperageUnder hot conditions at ultimate vacuum pressure the StandardPump pulls 2.1 amps while the Industrial Pump only pulls 1.7 amps. Hence, theIndustrial Pump is more efficient. WeightThe Industrial Pump is easier to move around as it weighs 2.2KGless than the Standard Pump (14.5KG versus 16.7KG.) is more durable and will last longer than the Standard Pump.

Legal metrology printer YDP20-0CE - Sartorius For Sartorius scale Dimensions: 215x155x78mm Weight: 1 (more)kg With new ink ribbon

DURAN and VWR Petri dishes set of 5 3 x Glass Steriplan, 80 x 15 mm DURAN 2 x Glass Duroplan, 80 x 2 (more)0 mm VWR