Elbanton cooling incubator

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Temperature range: 2°C to 15°C Dimensions (HxWxD): 2115 x 700 x 830 mm Internal dimensions (HxWxD):  (more)1570 x 530 x 650 mm

This New Brunswick Innova 4300 Incubator Shaker was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and has been tested with a digital thermometer (not included). The shaking plate has also been tested. The system is in full working order. It is in reasonable cosmetic condition with marks from use. Internal dimensions - L88 W56 D34cm

Heraeus Heracell 150 Co2 Incubator Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition externally but the copper interior has tarnished.

Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V Temperature Range Ambie (more)nt +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 97L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 97L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

High Capacity HRP Platform Wherever high readability and precision are important. Wherever good repe (more)atability in harsh industrial conditions matters. High Capacity HRP Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others High Capacity HRP Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable High Capacity HRP Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. High Capacity HRP Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential High Capacity HRP Platforms work with one of two weighing terminals: PUE 7.1 or PUE HY10. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

F1 class standard: knob weight Nominal value: 2 g Material: stainless steel Knob weight is exception (more)al measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve & Shell (more) FreezerFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700612300 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve & Shell Freezer 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo MAGIO MS-1000F Refrigerated Circulator, 115V/60Hz Working Temperature Range -50°C to 200°C C (more)ooling Capacity 1000W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-1000F Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris MR9620 SmartReader Multimode Microplate Reader w/ PC Software Included Detection Modes Absor (more)bance, Fluorescence, Luminescence Microplate Formats 6, 12, 24, 48, 96, and 384-well Plate Incubation Ambient +4°C to 45°C Features - Intuitive, 10-inch color touch screen - Stand-alone system with optional PC software (FDA CFR Part 11) - Monochromator-based system for UV through visible absorbance - Filter module system for fluorescence assays - Advanced PMT detector for luminescence assays - Optional automatic injection modules for flash luminescence - 2 Year Manufacturer's Warranty