Cooled Incubator SMART STP4 POL-EKO

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R FALC

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks.

Yamato IN-604WMK-115V Programmable Refrigerated Incubator with Window & MK-161 Shaker 143L, 115V (more) Temperature Range -10°C to +50°C Temperature Distribution Accuracy ±1.0°C (refrigerator in continuous operation at 37°C) Chamber Volume 143L Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W) - Interior light for better sample visibility (IN604W/804W) - Optional slide shaker table available to put in and take out samples easily (IN604W) Low temperature 143L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Comes with a compact shaker. Operating temperature range: -10 - + 50° C INCLUDED: The Yamato IN-604WMK-115V Programmable Refrigerated Incubator with Window & MK-161 Shaker 143L, 115V includes: - 3 x Shelves w/ 6 x Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Kendro Heracell C02 incubator. Air jacket. Capacity 151 L. Temperature range from ambient + 3ºC to 5 (more)5°C. ContraCon 90 ºC decontamination routine. Constant humidity: =/>95%rH. CO2 control range from 0 to 20% by volume. Overtemperature protection. Stainless steel interior with 3 trays and 2 drip trays. Foil control panel with digital display. Interface RS 232. Dimensions (WHD):  internal 470*607*530 mm, external 637*867*760 mm. Power 230 V. 50/60 Hz. 550 W. User manual. The Kendro / Heraeus HERAcell 150 CO2 Incubator is the ideal CO2 incubator for cell and tissue cultures, including development of ova or embryos at or near body temperature. It provides everything needed to protect and grow the user's samples, including safe and stable incubation conditions to ensure optimum culture growth. HERAcell incubators use a ContraCon 90°C decontamination routine which decontaminates the entire chamber interior and is proven to eliminate mycoplasma as well. Also, they are enhanced with an air jacket to maintain temperature uniformity and quick set-up time, as well as direct humidification which offers the fastest humidity recovery times and provides optimal growth conditions for cultures.

Memmert IF750plus Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications. Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments. INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Boekel Scientific 135000 TTT Incubator, 115VSpecifically designed for maximumtemperature stability a (more)nd uniformity the Boekel Scientific 135000 TTT Incubatoror “Tight Temperature Tolerance” incubator uses mechanical convection and anoptimized configuration. Ideal for waste water/water quality testing,microbiological testing, or any small sample temperature sensitive process. TheTTT incubator includes a removable shelf, a large viewing window and an easy touse digital control system with a configurable alarm and timer. The TTT isrecommended for use with plates, trays and 100ml samples in testing forheterotrophic bacteria including coliform, enterococci, and pseudomonasaeruginosa. The 0.34 cubic foot (9.62l) unit can hold twelve 120mL bottles oreight 250ml bottles or multiple trays and plates. Boekel incubators are usedworldwide in research and medical institutes, water quality testinglaboratories, food and beverage quality control labs. Maximum temperature stability and uniformity. Easy to use digital interface with configurable timer and alarm. Large viewing window. Two year Warranty. Click Here to View Product Video INCLUDED: The Boekel Scientific 135000 TTT Incubator, 115V includes: - One Shelf - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Polaron Critical Point Dryer with Pressure Hose was removed from a university lab where it was  (more)surplus to requirements. The item is in good cosmetic condition but untested due to not having the correct equipment at our facility, therefore this item is sold as Spares or Repairs.

Glas-Col Unit Pulse Platform Incubator This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and has been tested with a digital thermometer (not included). Ran at full RPM(1200) with no issue. It is in good cosmetic condition internally and externally.

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 50 g), plastic box Number of p (more)ieces in the set: 20 Weights 1 g i 2 g – solid masses without adjusting chamber

The scales is designed for weighing patients in health care facilities and in clinics. It is equippe (more)d with indicator PUE C315 series comprising a backlit LCD display and 5-button keyboard ensuring simple operation of scale basic functions. Personal scales is supplied either by mains or by batteries. The model without height-meter has an indicator attached to the weighing platform. It is manufactured as a dual range instrument.

Edwards Silencer for nXDS and XDS5/10 Dry Scroll PumpsFeatures - Compact design combines both filtra (more)tion efficiency and noise reduction - Integrated inlet diffuser optimizes sound attenuation - Multi-stage noise reducing features including final stage sound absorbent insert - Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop - Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element - Seamless drawn housings - no welds to rust or vibrate apart - Durable carbon steel construction with black powder coated finish - Ability to mount vertically or horizontally The Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps has two main functions: to reduce exhaust noise during pump down and gas ballast operation as well as to collect and retain tip seal dust as the pump is operated. Exhaust gases exit the exhaust port when the pump is being used to evacuate a process chamber, or when the gas ballast control is being used, or both. The noise level when pumping down rises as the throughput increases and the silencer is used to reduce this noise level. The outer can is made of pressed steel and is split to allow access to the filter elements. The filter element housing is made from Santoprene thermoplastic elastomer. The element itself is polyester. The foam block is manufactured from filter foam. INCLUDED: The Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps includes: - NW25 Clamp - Centring Ring - Manufacturer's Documentation - 1 Year Manufacturer's Warranty