Binder CO2 Laboratory Incubator Model CB 150 Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed form a university lab where it was surplus to requirements. The unit powers up but  (more)the backlight in the screen has failed making it impossible to see the screen to set temps etc. It is sold for spares/repairs.

This Sanyo MIR 553 Refrigerated Laboratory Incubator was removed from a university lab where it was  (more)surplus to requirements. The unit is in good cosmetic condition with only limited usage marks. It has 4 shelves and a key with it. It powers up and has been tested with a digital thermometer (not included). When set at the lowest temperature of -15ºC our thermometer read 0.8ºC (The unit's internal thermometer read -0.2ºC)When set at 37.5ºC our thermometer read 38.2ºCWhen set at 50ºC our thermometer read 50.6ºC The lamp inside is in working order, but the exterior lamp doesn't seem to work. It may need a new lamp. Interior dimensions:D53cm x W65cm x H128cm

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

This New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and the incubator and shaker have both been tested (digital thermometer not included). It is in full working order. It is in reasonably good cosmetic condition, with signs of use. Internal Dimensions: 87 x 56 x 34 cm

Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.) Features - 256 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V is a high-capacity, energy-efficient solution for precision temperature control in laboratory environments. With a substantial 256-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it is ideal for handling large sample loads and diverse incubation requirements. The incubator features an advanced Peltier heating and cooling system with individually controlled upper and lower elements, ensuring even temperature distribution. Its intuitive ControlCOCKPIT, equipped with TwinDISPLAY and adaptive PID-microprocessor controller, provides effortless control over temperature and other settings, while the SetpointWAIT function enhances accuracy by initiating process timing only once the desired temperature is reached. Safety and durability are central to the IPP260ecoplus. The AutoSAFETY system includes over- and undertemperature protection with visual and acoustic alarms, automatically adjusting to the setpoint tolerance range to protect samples. The incubator’s stainless steel interior and textured exterior are designed for long-term corrosion resistance and easy maintenance. With nine adjustable shelves and a maximum chamber load capacity of 661 lbs, it supports extensive sample storage, making it a reliable and versatile addition to any laboratory focused on precision and safety.. INCLUDED: The Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This listing is for a European Instruments Oxford F1 200g Weight. The unit is in full working condi (more)tion and is ready for immediate release. The European Instruments Oxford F1 200g Weight is a high-precision weight used for checking the accuracy of balances and scales. Here are some key features and facts about this weight: Weight Class: The Oxford F1 200g Weight belongs to the F1 weight class, which is a high-precision weight class. Material: The weight is made of stainless steel, which is a durable and corrosion-resistant material. Weight Denomination: The weight is available in a denomination of 200g, which is a common weight denomination for laboratory and industrial applications. Supplied in: The weight is supplied in an ABS plastic box, which provides protection and convenience for storage and transportation. Serial Number Identified: Each weight is serial number identified, which ensures traceability and accountability.

The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping spe (more)ed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. Displacement (50Hz): 20.5 m3/h Displacement (60Hz): 25.0 m3/h Speed (50 Hz): 17.0 m3/h Speed (60Hz): 20.4 m3/h Nominal rotation speed (50Hz): 1440 rpm Nominal rotation speed (60Hz): 1720 rpm Ultimate vacuum (total pressure) without gas purge: 1 x 10-3 mbar Ultimate vacuum (total pressure) with gas purge: 1.5 x 10-2 mbar Max permitted pressure at outlet: 0.5 bar Max inlet pressure for water vapour: 20 mbar Max water vapour pumping rate: 0.3 kg/h Oil capacity: 0.75 – 1.05 l

This ATAGO Palette D 2020 Digital Refractometer was removed from a university lab where it was surpl (more)us to requirements. This item is in good cosmetic condition and powers up, unable to test further at our facility.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA Oven 125 Control Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 300 °C Ope (more)rating Area Inner chamber 550 x 525 x 450 mm Features - IKA Oven 125: High-performance drying cabinets for precise temperature tasks. - Rapid heating and precise control for reproducible results in labs and research. - 125 l interior with high-quality insulation reduces odours and operating costs. - Heats up to 300°C with enhanced security features for temperature monitoring. - Well-lit interior with up to 6 shelves, automatic fan-off when door opens. - Interface for extra sensor and USB for direct temperature regulation and data storage. - Two TFT displays for process parameters, with intuitive user interface for profiles. - Real-time clock for digital documentation and time-delayed start enhances operation. The models in the IKA Oven 125 dry series are powerfuldrying cabinets for temperature regulation, drying, ageing and heating tasks.Rapid heating and exact temperature regulation guarantee reproducible resultsin industrial laboratories, schools and universities, research, quality controlor science. Thanks to its high quality insulation, the device has a very largeinterior of 125 l in relation to its total volume. This structure also reducesodour emissions and operating costs and ensures excellent temperatureuniformity. The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C.The additional temperature selection limited TWB (DIN 12880) meets the highestsecurity requirements. Furthermore, the temperature curve can be monitored duringtesting independently of the safety temperature. This means that your testmaterial is always protected. A well thought out interior The generously dimensioned interior of the Oven 125 control dry is comfortablyilluminated. A practical cable bushing at the rear of the device is provided asstandard for measurements in the oven or in the test material. The fan switchesoff automatically if the door is open. Up to 6 insertable shelves can beaccommodated in the interior made of stainless steel. Interfaces The Oven 125 control dry offers an interface for an additional sensor fordirect temperature regulation in the test material. Test parameters can bestored directly on a USB stick. Two displays All important process parameters are displayed clearly on two large TFTdisplays. The temperature profiles and individual user profiles can be enteredvia the intuitive user interface. The real-time clock enables convenientdigital documentation and a time-delayed start. Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven includes: - IKA Oven 125 control - dry - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 320 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCD Time setting range1 - 142560 minNumber of trays max.6 Load for one tray max.30 kg Operating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight82 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }