Binder CB220 CO2 Incubator (divided inner door)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Panasonic CO2 Laboratory Incubator Model - MCO-18AC-PE was removed from a university lab w (more)here it was surplus to requirements. The unit has been professionally serviced. It is in good working order. It will require calibration on installation. It is in good cosmetic condition and is clean inside. Internal dimensions - L51 x W48 x H67cm2 Shelves - 46 x 45cm

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

Memmert IN75 Natural Convection Incubator 74L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 74 L Features - 74 L (3 cu.ft.) capacity for versatile sample accommodation and efficient use of space - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Display resolution of 0.1°C for both set point and actual values - Adjustable parameters including temperature (Celsius or Fahrenheit), air flap position, and program time - SetpointWAIT function ensures process time starts only once set temperature is reached - Calibration with three selectable temperature values for precise adjustments - Language options: German, English, Spanish, and French - Stainless steel interior with a max chamber load of 264 lbs, resistant to corrosion and easy to clean - Autodiagnostic system and overtemperature monitor for enhanced safety The Memmert IN75 Natural Convection Incubator 74L, 115V is designed to provide precise temperature control and reliable performance for low-temperature applications. With a spacious 74 L (3 cu.ft.) capacity, this incubator offers versatile sample accommodation and even heat distribution through its natural convection system. Equipped with a Pt100 sensor in a 4-wire circuit, the IN75 maintains temperature accuracy to 0.1°C, managed through a SingleDISPLAY digital PID-microprocessor controller. Additional features include AtmoCONTROL software, allowing efficient data management and programming via Ethernet, and an autodiagnostic system with an overtemperature monitor for enhanced safety. Its easy-to-clean stainless steel interior and robust design make it ideal for rigorous lab environments. INCLUDED: The Memmert IN75 Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN55 Natural Convection Incubator 53L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 53 L Features - 53 L (1.8 cu.ft.) stainless steel chamber designed for efficient sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature monitoring - ControlCOCKPIT with SingleDISPLAY and adaptive digital PID-microprocessor controller for accurate control - Natural convection system ensures consistent and even heat distribution throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air admixture - Autodiagnostic system with adjustable overtemperature monitor for enhanced safety - Max chamber load capacity of 176 lbs with easy-to-clean, durable stainless steel interior The Memmert IN55 Natural Convection Incubator 53L, 115V is designed to deliver precision and reliability for low-temperature applications in laboratory environments. Featuring a 53 L (1.8 cu.ft.) stainless steel chamber, this incubator provides efficient sample storage and maintains a temperature range from at least 5°C above ambient to +80°C. Equipped with a high-precision Pt100 sensor in a 4-wire circuit, the unit ensures stable temperature control, managed through the ControlCOCKPIT SingleDISPLAY with an adaptive PID-microprocessor for quick adjustments. The natural convection system promotes even heat distribution, while an electronically adjustable air flap allows optimal fresh air intake. The durable, easy-to-clean interior supports a maximum load of 176 lbs, and the built-in autodiagnostic system with an adjustable overtemperature monitor enhances operational safety, making it an ideal choice for research and development, pharmaceuticals, and food technology applications. INCLUDED: The Memmert IN55 Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark Incu-Shaker Mini Incubator ShakerFeatures - Exceptional temperature uniformity and accurac (more)y - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker Mini is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 in. work space accepts several platforms and a variety of flasks, tubes and other common vessels. Features a touch screen control over time, speed, and temperature settings. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker Mini Incubator Shaker includes: - 9.5 x 11.5 in Non-slip Rubber Coated Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Rigaku X-ray Diffractometer (XRD) Ultima III This system was removed from a university lab where it  (more)was surplus to requirements. The system is in reasonable used cosmetic condition. It has not been powered on at our site due to our on-site risk assessments surrounded X-Rays. Various components and parts are included as listed below, along with a PC setup, although no Rigaku software programs appear to be installed on the PC.However, there are the following software disks included: - Rigaku Basic Software (Cat No.: 9240J101) - Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101) - Rigaku Special Order Software (U30megaP) (Cat No.: 9999) System Specifications: - Model: Ultima III - Cat No.: 2035M410 - Serial No.: DD3654N - 6 Station Holder - Model: SA-HEM3 - Cat No.: 4057J101 - Serial No.: 00563702 - Patlite Beacon - Model: LMS-L (SN-06X03M) - Rigaku DC Motor Controller - SN: DD12866 - Rigaku Long Fine Focus - Type: R01-29-0202 - NC: 9430 022 73201 - No. DK 402688 - Rigaku CBO Cross Beam Optics - Cat No.: 2220B101 - SN: DD12793 - Additional Rigaku parts: - Cat No.: 5738E402 (SN-DD061813) - Cat No.: 2155G101 (SN-DD12804) - Cat No.: 4601K831 (SN-DD12154) - Cat No.: 4253A101 (SN-DD11586 - Vexta Stopping Motor - Model: PK543-A - SN: UR70J32307 PC Setup: - Dell Optiplex 9020 with monitor, keyboard, and mouse - The PC is in working order with all passwords cleared. It contains a few Rigaku files, but no software programs appear to be installed. Included Manuals/Software: - 2 x Rigaku D/MAX 2000/PC Series Instruction Manual - X-Ray Diffractometer Instruction Manual - Rigaku Basic Software (Cat No.: 9240J101) - Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101) - Rigaku Special Order Software (U30megaP) (Cat No.: 9999) Loose spare parts included: - Rigaku Cat No.: 2701E201 (SN-AD08851) - Container of round parts: Rigaku 900003 SH, w/Groove - 2 x Small containers with unknown parts - Scintag Generator Key - Key labeled: "Microscope" - Container of small metals, including: - 1 x Bag labeled "Silicon" - 1 x 640d Silicon Powder - 2 x Tubs UCAR Spectroscopic Powder - 1 x Tub labeled "Tung Flake" - Approximately 20 x small containers of Silicon metal

Crosslinker Hönle UV Technology LED. Wavelength of 365 nm. Composed of 3 modules: LED Spot 100 LED  (more)Cube 100 and LED driver Powerdrive 40. Includes software and instruction manuals. Specifications: LED Spot 100: • Extremely long LED service life • Intelligent power control • Controller for one, two or three LED Spot 100 available • 100 mm x 100 mm irradiation area LED Cube 100: • Extremely long LED service life • Available in different wavelengths • Power control between 2 - 100 % • Intelligent door-LEDconnection • Homogenous irradiation • Suitable for temperature sensitive materials • Do not warm-up phase • No stand-by time • Lamp units with different wavelengths easily exchangeable

If you buy a High Resolution Scale PUE 7.1 by July 31, 2024, you will receive each of these products (more) along with a FREE lifetime license for the Workflow Module. High Resolution Scale The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2000 kg, with a repeatability of 3 g guaranteed. 9 advantages, 1 monobloc The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved technology. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2 000 kg, with a repeatability of 3 g guaranteed. For such industries as pharmaceutical, chemical, food and… HRP scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, analog output module, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, PUE 7.1 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of PUE 7.1’s working mods.

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes: 11 mass standards, 1 tweezer. Applications: Calibration and verification of scales: Class E1 standards are ideal for calibrating and verifying precision analytical and laboratory scales. Metrological laboratories: The standards are indispensable in metrological laboratories where the highest measurement precision is required. Research andiIndustrial institutions: They are used in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

Crest Ultrasonics Mesh Basket for P230 Ultrasonic Cleaner The Crest Ultrasonics Mesh Basket for P230 (more) Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The P230D Stainless Steel Mesh Basket is 9" in length x 5" in width x 3.5" in depth and is for use with the P230 Ultrasonic Cleaners. The Crest Ultrasonics Mesh Basket for P230 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

Branson Flow Thru Horn 1/2 in Diameter With Two 1/8 in NPT Ports Flow thru horn. 1/2″ diameter wit (more)h two 1/8″ npt ports, use with Branson SFX250, SFX550, S250A, S450A sonifiers, designed for the pharmaceutical industry, used for mixing, emulsification, dispersion, formation of mists and fogs.INCLUDED: The Branson Flow Thru Horn 1/2 in Diameter With Two 1/8 in NPT Ports includes: - Manufacturer's Warranty