Benchmark H3020 Incu-Shaker 20L Stackable Shaking Incubator

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Orbital shaker with Ohaus incubator OHAUS Light Duty Incubation Shakers are designed to incubate sam (more)ples and ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The microplate shaker, with opaque lid for light-sensitive or transparent samples, is designed to hold up to 4 microplates or deep well plates, or for 2 racks for microtubes. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicato

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in working order. It will need to be calibrated upon installation. It is in good cosmetic condition with minor marks from use. Item has 4 shelves. Internal dimensions are L49cm x W48cm x H66cm.

Yamato IC-903CW General Purpose Incubator with Window 567L, 115V Temperature Range Ambient +5°C to  (more)80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 567L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 567L natural convection incubator with communication port. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C INCLUDED: The Yamato IC-903CW General Purpose Incubator with Window 567L, 115V includes: - 8 x Shelves w/ 16 Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V Temperature Range Ambie (more)nt +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 97L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 97L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark H3020 Incu-Shaker 20L Stackable Shaking Incubator Speed Range 30 to 300 RPM Temperature Ra (more)nge Ambient +5°C to 60°C Temperature Uniformity ± 0.5°C at 37°C Features - Stainless steel chamber provides premier temperature uniformity - Proven reliable, maintenance-free Incu-Shaker motor drive system - Bright, intuitive touch-screen controls - Instantly change flask clamps with MAGic Clamp accessories - Included pull-out adjustable shelf for static incubations - Stacking capability of up to 2 units - 2 Year Manufacturer's Warranty

Olympus BX51WI Microscope w/ XLUM Plan FI 20x/0.95 W Objective This was removed from a university la (more)b where it was surplus to requirements. The item is in reasonably good cosmetic condition. It is fitted with a high-quality 20x water immersion lens, 1 filter cube, and a broken filter carousel light shield (easily replaceable). The fine focus belt is broken and requires replacement and there is no fluorescence light source (liquid light guide type) or stage is included. Due to the faults stated above, this microscope system is listed as Spares/Repair. It is made up of the following modules; Olympus WHN10x/22 Eyepiece x 2Olympus XLUMPlanFI 20x/0.95 W Objective Olympus U-LH100IR Lamp Olympus WI-OBCD NA 0.8 CondenserOlympus TH4-200 Power Supply

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul Volume Range 0.1-2.5uL Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 2.50/3.00/12.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Oven 125 Basic Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 250 °C Opera (more)ting Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit Universal oven for tempering, drying, aging and heatingapplication in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools /universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducibletest results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded forfurther analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven includes: - IKA Oven 125 basic dry - Wire grid tray, chrome plated (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature display yesTimer yesTimer display 7 segment LEDTime setting range1 - 144000 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight74 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby1 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Hermle Z32-HK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control - (more) Active imbalance detection and cut-off - Motor driven lid lock - Automatic rotor identifi cation system with over speed protection - Audible signal at the end of each run - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40C) - Autoclavable rotors - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10 increments - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Interested in rotors and/or adapters for this centrifuge?Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z32-HK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty