Benchmark H2300-HC2 MyTemp Mini CO2 Digital Incubator

This was removed from a university lab where it was surplus to requirements The unit powers up and w (more)orks but has a faulty CO2 sensor. It is sold for spares/repairs.

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a univer (more)sity lab where it was surplus to requirements. The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it. The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed. It is in excellent cosmetic condition with some minor marks from use. 4 Shelves - 49.5 x 49.5cm Internal dimensions - D52 W50 H55cm

Thermo Scientific MaxQ 5000 Refrigerated Shaking Incubator This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation. It is in good cosmetic condition with marks from use. Internal dimensions - L86 W56 H47cmShaker Platform - 76 x 46cm

Yamato IC-603CW General Purpose Incubator with Window 159L, 115V Temperature Range Ambient +5°C to  (more)80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 159L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 159L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-603CW General Purpose Incubator with Window 159L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IN260 Natural Convection Incubator 256L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 256 L Features - Spacious 256 L (9 cu.ft.) chamber for versatile sample accommodation - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for set point and actual values - Inner glass door allows convenient sample viewing without disrupting the internal environment - Adjustable parameters including temperature, air flap position, program time, and time zones - SetpointWAIT function starts process timing only after reaching the set temperature - Multi-language support with German, English, Spanish, and French options - Autodiagnostic system with adjustable overtemperature monitor for reliable safety The Memmert IN260 Natural Convection Incubator 256L, 115V is designed to provide precise and efficient temperature control for a variety of laboratory applications. With a spacious 256 L (9 cu.ft.) chamber, this unit accommodates a range of sample sizes, maintained within a temperature range of at least 5°C above ambient up to +80°C. Its high-resolution display with 0.1°C accuracy allows precise control over set points and actual temperature values, while the inner glass door ensures convenient sample viewing without disturbing the chamber environment. Featuring adjustable parameters—such as temperature, air flap position, and program timing—along with the SetpointWAIT function, which initiates timing only once the set temperature is reached, this incubator is designed for exacting standards. The multi-language interface offers support in German, English, Spanish, and French, with an easy-to-clean, reinforced stainless steel interior that promotes consistent heat distribution. For added safety, the unit includes an autodiagnostic system with an adjustable overtemperature monitor. INCLUDED: The Memmert IN260 Natural Convection Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA KS 4000i Incubator Shaker Type of Movement Orbital Heating Temp. Range Room Temp. +5° - 80 °C Sp (more)eed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly This innovative incubator shaker offers unattended operation in a controlled environment, featuring a large LED display for speed and time settings, antimicrobial-coated controls, and integrated PID temperature control using dual PT 1000 sensors. It includes an electronic temperature and speed control, a timer switch for up to 999 hours, and an optional built-in cooler for external cooling unit connection. Safety features include automatic shutoff when disturbed or when the hood is lifted. With a permissible shaking weight of 20 kg, a speed range of 10-500 rpm, and a heating temperature range from room temperature +5°C to 80°C, this unit ensures precise and reliable operation for various laboratory applications.

Maximum Capacity: 6.1 kg Readability: 5 mg Repeatability: 3 mg Linearity: ±7 mg Settling Time: 2 s A (more)djustment: Internal / proFACT Advanced Weighing Pan Dimensions (WxD): 205 mm x 172 mm Dimensions (HxWxD): 102 x 214 x 411 mm

The MicroCal DSC Automated system delivers high throughput and sensitivity, with low sample consumpt (more)ion, in an integrated platform for increased productivity. All cell filling and cleaning functions are fully automated, for walk-away operation. Automated data analysis supports the generation of high integrity thermal stability data and delivers compliance with regulatory requirements, whilst allowing easy integration into existing data handling and transfer systems. Screens up to 50 samples per day with unattended operation Automated cell filling and cleaning Standard 96-well plate sample format Thermostatically-controlled storage of up to 6 plates Measurement of very tight binding constants, up to 10²⁰/M Including software

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 20 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz