Packard 500TR Series Flow Scintillation Analyser D515F01 & Accessories Lab

Partec Cyflow Space FACS stand alone system with Analytical cuvette. Equipped with: 4 measurable par (more)ameters: FCS, SSC, D3 and D4 bandpass filters (expandable to 9 parameters). Blue diode laser 20 mW 488 nm (expandable to 3 laser light sources). Sorting unit with green laser (sorting cuvette not included, but can be ordered from Sysmex). Fujitsu PC with Flowmax software for flow data analysis. Bottle rack for 1 liter bottles (for e.g. sheat fluids, buffers and waste).

MoFlo Astrios EQS Cell Sorter in BSL Hood. All units are in good used cosmetic condition. The system (more) powers up as it should. We were informed by the lab that the Red laser is faulty and requires replacement. The unit has the following lasers installed: 1 X 640NM - 106MW.1 X 561NM - 202MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 09/30/2013. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use.Powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser & computer system powers up fine. 1 x Thermo/Haake SC100/A28 re-circulator/chiller.Powers up fine. 1 x Intellipower UPS.Powers up fine. 1 x Jun-Air OF302 Silent Air Compressor.It was noted by the lab that this is quite loud. We powered it on and it sounds normal for one of these units. Also includes various spares and accessories shown in pictures.3 x '100' spare nozzle tips8 x '70' spare nozzle tips.

This Packard 500TR Series Flow Scintillation Analyser was removed from a university lab where it was (more) surplus to requirements. The unit Powers on and is currently running 515TR BIOS version 3.11. We were unable to test it further. It is in good cosmetic condition with only minor marks from use. Included with it are; 1x 500TR reference manual1x Floppy master disc FLO-ONE for windows Ver 3.651x External control cable1x 24bit external control cable1x FSA Pump retro fit kit1x FSA 500TR Narrowbore pump Cal Instructions2x Serial cables1x Misc control cable1x Flow cell LQTR 500 ul1x Flow cell NBLQ 99 ul1x Bag part of flow splitter 77000211x Bag of Homogenous option kit 7601621

This GE Healthcare Life Sciences IN Cell Analyser 1000 System was removed from a university lab wher (more)e ti was surplus to requirements. The unit powers up but in testing we found an issue with the Liquid handling system's y-Drive. It is showing Error 42 - step loss encoder. We were unable to test it any further due to this and the software will not fully start up. It is in otherwise good cosmetic condition with minor marks from use.

This Becton Dickinson BD LSRFortessa was removed from a university lab where it was surplus to requi (more)rements. The lab informed us it was in full working order prior to removal. Included are;1x BD LSRFortessa Model No 649225B1The unit powers on and is in good cosmetic condition. The fans are working and air can be felt blowing away from the unit. 1x ONEAC Power supply:Model PCM1500U-CPBBThe unit powers the BD LSRFortessa unit. It is in good cosmetic condition. There are some light tape marks from general use. 1x BD High throughput Sampler:Cat No. 647701The unit powers on and is in good cosmetic condition. 1x BD FACSflow Supply System:Ref, 349227The unit powers on and is in good cosmetic condition. 1x Nalgene Bottle:Volume, 2LThe unit is in good cosmetic condition. 1x BD Closed Waste Container:The unit is in good cosmetic condition.

Photodiode array detector Waters 2996. Range of 190 to 800 nm. Optical resolution of 1.2 nm. Accurac (more)y of wavelength 1 nm. Includes manual. Specifications:

Mini heating plates and magnetic stirrers This ruggedly built OHAUS series of small instruments can  (more)heat and mix up to 1,000ml of water on their 102 x 102mm ceramic plate. They are perfect for school labs and other applications that require simple shaking and heating on a daily basis. All models are equipped with a support rod hook with a locking knob that accommodates the optional support rod kit. Stir models include a 38mm PTFE coated magnetic stir bar. Available models: Model with heating: up to 500°C. Fixed temperature model: 500°C. Model with stirring: 500°C. Model with heating and stirring: stirring from 100 to 1200 rpm; temp. up to 500°C. Applications Boiling water, solubilization buffers and reagents, preparation media, concentration samples Operation Detachable three-wire cable and plug (included) Structure Valox armor, knobs with basic controls, 3.8cm stir bar (included with stir models), On / Off toggle switch (fixed temperature models) ___________ Not sure which model to choose? Download the Ohaus Hotplate and Shaker Selection Guide for a quick overview of all available models.

The Systec V-series of top-loading vertical autoclaves is distinguished by its small footprint and h (more)igh chamber capacity. Result: optimal loading capacity with most standard media bottles and Erlenmeyer flasks. Features: Integrated, separate steam generator Housing, support frame and pressure vessel made of corrosion-resistant stainless steel Temperature and pressure range 140 °C, 4 bar absolute pressure LCD display and fully automatic microprocessor control Up to 25 sterilization programs Code-secured access rights for changing parameters and further safety-relevant intervention Internal memory for storing up to 500 sterilization cycles Timer for starting programs Autofill: automatic demineralized water feed for steam generation Flexible PT-100 temperature sensor Additional temperature sensor in condense exhaust Temperature holding function for liquids after program finish Special program for Durham tubes Calculation of F0 value Special program for waste sterilization with pulsed heat-up for more efficient air exhaust Water-cooled steam exhaust, thermostatically controlled Programmable automatic door-opening on completion of program Quick cooling for efficient and safe cooling of liquids Vacuum system for validatable sterilization of solids and waste materials in disposal bags Integrated printer for batch documentation Chamber dimensions (ØxD): 344 x 600 mm Nominal chamber capacity: 55 L Dimensions (HxWxD): 950 x 500 x 680 mm Weight: 115 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CABINET FIRE Series MY11 Gray 60 BASIC - CHEMISAFE - Entirely made of 1 - 1.5 mm thick electrogalvan (more)ized sheet steel, cold bent - Gray RAL 7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to standard 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded cabinet - Adjustable leveling feet - Door with lock and key - 3 shelves in painted steel (BASIC series) or in stainless steel (EASY series) adjustable in height, 1 retention tray with grid - Shelf fixed with aluminum pins, excluding all risk of sparks - Shelves tested for fire resistance - ISO 3864: Signs with pictograms - Certified with fire resistance 90 minutes, according to the EN14470-1 BV standard (Bureau Veritas) - Certified according to the EN16121 BV standard (Bureau Veritas) - Easy replacement of spare parts in case of damage - Available in the version with double capacity and external dimensions WxDxH: 200x600x1950mm Supplied: - 3 painted steel shelves (max load 60 kg evenly distributed) + 1 pan with grid (capacity 20 litres) - Door hinge on the left, on request on the right Optional: - Shelves - Timer - Open door alarm - Ventilation - Electric aspirator - Activated carbon filter - Cooling system - Internal carbon dioxide system with automatic thermal activation (62°C)

The water vapour permeability determination set is used in moisture analyzers of max capacity greate (more)r than 50g. Water vapour permeability is a feature that determines the quality and practicality of application of a given fabric. Clothes or footwear made of materials of inadequate permeability may be unhealthy and uncomfortable. In order to determine water vapour permeability, RADWAG moisture analyzer has to be equipped with a water vapour permeability determination set. The developed method of testing water vapour permeability consists in placing required amount of water in a vessel made of aluminium alloy, inside which a fabric sample, cut using a blanking die, is clamped. Prior to the test, the sample should be left in a room with stable ambient conditions for 24 hours. It is recommended to place the vessel containing water and sample in the moisture analyzer and start the drying process at 40°C. The advantage of this method is a very short drying time. It takes up to 50 minutes to obtain the result. In contrast, measurement carried out using standard method takes up to 72 hours. Measurement results are presented in mg H2O / 1000 mm2 / 24h or as the percentage amount of water vapour passed through the material to the amount of water vapour passed without the tested fabric.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).