Invitrogen Countess II Cell Counter

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab This system was removed from a (more) university lab where it was surplus to requirement. Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility. Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware. Nucleocounter C-200Serial No. 9000201112003520 Lenovo Thinkpad T15 laptopWindows 10 operating systemSerial No. PF-2J1PMV Also includes the following: Included:2 x Low-voltage power supplies1 x Data lead

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Accuris QuadCount Automated Cell Counter The Accuris QuadCount™ improves on the simple technique of  (more)brightfield microscopy by utilizing an LED light source, precision optics and a high resolution CMOS detector. A finely tuned, motorized XYZ positioning stage provides for extra fine focusing and ability to capture multiple images.With count speeds at fast as 20 seconds per sample, the Accuris QuadCount provides many advantages over the tedious and time consuming manual hemocytometry method. The advanced software eliminates human bias in dead/live determinations, reduces counting errors, saves time, and improves efficiency.The QuadCount utilizes a unique 4-chambered disposable QuadSlide™. Four samples can be processed in one slide (twice the capacity of standard 2-chambered slides), decreasing consumable costs. Each chamber has a hydrophilic inner surface with an engraved grid pattern. High precision production and molding ensure that each QuadSlide meets the rigorous standards and dimensional tolerances required for optimal counting performance. 3 Count Modes Available to analyze different sample volumes. - Quick Mode: 0.15uL / 20 seconds (1 image frame) - Normal Mode: 0.9 uL / 30 seconds (6 image frames) - Precise Mode: 3.6 uL/ 100 seconds (24 image frames) The QuadCount’s ability to analyze larger sample volumes/multiple images provides significantly better accuracy.The Accuris QuadCount incorporates the highest quality optical and electronic components, such as a 4X objective lens and 5MP CMOS detector, to ensure reliable performance and consistent results. The precision motorized stage adjusts the position of the lens and sensor assembly in micron increments for automatic focus. Multiple image frames (up to 24) can be captured to increase the volume of sample counted, providing a higher level of accuracy.Correct focus is crucial for accurate counts of viable cells. The QuadCount’s proprietary autofocus system and image analysis software work in conjunction with the motorized stage to analyze and capture images in the proper focal plane.Advanced detection algorithms easily manage irregularly shaped and aggregated cells. Often misinterpreted by visual counting, correct analysis of these cells is performed by QuadCount’s software, resulting in more accurate counts. User to user variation is eliminated. Click Here to View Product Video INCLUDED: The Accuris QuadCount Automated Cell Counter includes: - USB Flash Drive - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Countess 3 Automated Cell Counter is a benchtop cell counting system equipped with an advanced m (more)achine-learning algorithm, ruggedized optics, fully-automated focus and lighting, and image analysis software for rapid assessment of primary and immortalized cell samples. Capacity: 2 samples per slide Detection Method: Brightfield Memory: On Board, USB Drive Sample Type: Immortalized cell lines & primary cells For Use With (Application): Cell culture & analysis workflows For Use With (Equipment): EVOS microscopes, Attune flow cytometers Dimensions (LxWxH): 229 x 229 x 140 mm Weight: 3.6 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Under-bench cabinet depth 51cm - Length 65cm Laboratory cabinet Length: 65cm Depth: 51cm Height: 71c (more)m In melamine 4 drawers On casters (hidden by the finishing profile) In good condition Slightly oxidized hinges and some small traces of wear (see photos)

Polyscience WBE05A11B 5L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the P (more)olyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE05A11B 5L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE05A11B 5L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISTHBLHTS Heated Thermal Shaker The Ohaus ISTHBLHTS Thermal Shakers is designed for applicati (more)ons that require consistent and precise results. With heating and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", color, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range with a temperature accuracy of ± 0.5° C between 20° C and 45° C; ± 2° C below 20° C and above 45° C. The ISTHBLHTS is designed for applications that require consistent and precise high-speed shaking with temperature control to 100° C. With heating and shaking capabilities, our shakers use interchangeable blocks to accommodate tubes and microplates. Intuitive LCD touchscreen allows the user to save and track progress of 5 user-defined programs, each with 5 individual steps. Enhanced electronics provide dependable temp. settings across the operating range. Program control capabilities allow user programmable operation for automated use and memory. Storage for five separate, 5-step programs, or unlimited if using the USB. Enhanced electronics provide accurate and dependable temperature settings across the operating range. The USB port allows for easily transferring test data to a flash drive for data logging and storage. Also ideal for program storage and performing software updates.Click Here to View Product Video INCLUDED: The Ohaus ISTHBLHTS Heated Thermal Shaker includes: - 1.5mL Block - Clear Rack - Cover - Hex Head Screwdriver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISTHBLHTS Heated Thermal Shaker Specifications Temperature Range4° C above ambient to 100° CTemperature Accuracy± 1° C between 20° C and 45° C± 2° C above 45° CSpeed Range300 to 3000 rpmSpeed Accuracy± 2%Timer1 minute to 99 hours, 59 minutesOrbit3 mm (0.12")Cooling Rateabove ambient 2-3° C/min; below ambient 0.5-1.0° C/minHeating Rate5° C/minOverall Dimensions (L x W x H)10.25 x 9.75 x 5.2" (26 x 24.8 x 13.2 cm)Ship Weight11.9 lbs (5.4 kg)Request a Formal Quote