Assistent Counter AC-12 Cell Counter

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The traditional manual interpretation of blood differential- srequires a high level of concentration (more) which can affect, adversely, the accuracy of the resulting differential count. The Assistent electronic memory counters facilitateaccurate recording of the blood cell differential profile.The microscopic image can be viewed continuously, and the count can be recorded blind.

Imaging performance Cell size: 5 – 300 microns (Cellometer CHT4-PD300 Slides are required for cells  (more)> 80 microns in diameter) Concentration range: 105 – 107 cells/ml Bright field imaging, fluorescent imaging and pattern-recognition software to quickly and accurately decluster, identify and count individual cells Fluorescent optics Excitation/Emission: 470nm/535nm Example fluorophores: Acridine Orange (+DNA) Calcein AM CFDA SYTO 9 SYTO 13 Excitation/Emission: 540nm/605nm Example fluorophores: Propidium iodide Ethidium bromide Dimensions (WxDxH): 280 x 300 x 330 mm Weight: 11.8 kg

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab This system was removed from a (more) university lab where it was surplus to requirement. Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility. Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware. Nucleocounter C-200Serial No. 9000201112003520 Lenovo Thinkpad T15 laptopWindows 10 operating systemSerial No. PF-2J1PMV Also includes the following: Included:2 x Low-voltage power supplies1 x Data lead

Accuris QuadCount Automated Cell Counter The Accuris QuadCount™ improves on the simple technique of  (more)brightfield microscopy by utilizing an LED light source, precision optics and a high resolution CMOS detector. A finely tuned, motorized XYZ positioning stage provides for extra fine focusing and ability to capture multiple images.With count speeds at fast as 20 seconds per sample, the Accuris QuadCount provides many advantages over the tedious and time consuming manual hemocytometry method. The advanced software eliminates human bias in dead/live determinations, reduces counting errors, saves time, and improves efficiency.The QuadCount utilizes a unique 4-chambered disposable QuadSlide™. Four samples can be processed in one slide (twice the capacity of standard 2-chambered slides), decreasing consumable costs. Each chamber has a hydrophilic inner surface with an engraved grid pattern. High precision production and molding ensure that each QuadSlide meets the rigorous standards and dimensional tolerances required for optimal counting performance. 3 Count Modes Available to analyze different sample volumes. - Quick Mode: 0.15uL / 20 seconds (1 image frame) - Normal Mode: 0.9 uL / 30 seconds (6 image frames) - Precise Mode: 3.6 uL/ 100 seconds (24 image frames) The QuadCount’s ability to analyze larger sample volumes/multiple images provides significantly better accuracy.The Accuris QuadCount incorporates the highest quality optical and electronic components, such as a 4X objective lens and 5MP CMOS detector, to ensure reliable performance and consistent results. The precision motorized stage adjusts the position of the lens and sensor assembly in micron increments for automatic focus. Multiple image frames (up to 24) can be captured to increase the volume of sample counted, providing a higher level of accuracy.Correct focus is crucial for accurate counts of viable cells. The QuadCount’s proprietary autofocus system and image analysis software work in conjunction with the motorized stage to analyze and capture images in the proper focal plane.Advanced detection algorithms easily manage irregularly shaped and aggregated cells. Often misinterpreted by visual counting, correct analysis of these cells is performed by QuadCount’s software, resulting in more accurate counts. User to user variation is eliminated. Click Here to View Product Video INCLUDED: The Accuris QuadCount Automated Cell Counter includes: - USB Flash Drive - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for a VWR VMS-C10 S2 Magnetic Hotplate Stirrer. The unit is in full working conditi (more)on and is ready for immediate release. Compact stirrers with a ceramic glass plate provide excellent chemical resistance. Units feature digital error code display, a ‘hot’ top indicator to warn users that surface is hot, a fixed safety circuit that shuts off the heater if temperature rises above 550 °C, and three operating modes to choose from (standard, safe and adjustment protection). Stirrers have a speed display scale and optional capability to connect directly to a PT1000 temperature sensor; when using this functionality, control accuracy in the medium is ±0,5 °C. Features: Exact temperature setting via digital potentiometer Simultaneous digital display of target and actual temperatures via LCD display Display of actual temperature value in medium with 0,1 °C resolution when using PT1000 temperature sensor Stirrer can be controlled using two microcontrollers Specifications: Model VMS-C10 Advanced Max. stirring capacity H₂O (l) 15 Speed range (min-1) 100 – 1500 Temperature range (°C) 50…500 Heat output (W) 1500 Power input/output (W) 15/1,5 Plate material Glass-ceramic Plate dimensions (mm) 260×260 W×D×H (mm) 300×415×105 Weight (kg) 6

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 1200 model (measured with ethanol): - a 20°C, 1.20 kW - a 10°C, 1.00 kW - a 0°C, 0.70 kW - a -10°C, 0.40 kW - a -20°C, 0.18 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41027ITEM-28378 SCIEX Equipment Piece ITEM-28376 Control System ITEM-28368 Consort E844 ITEM-28369 Consort E844 ITEM-28370 Consort E844 ITEM-28374 Alaris Infusion SystemITEM-28387 Nanospray Switch ModuleITEM-28381 Artesyn Power SMP/PF ITEM-28384 Coil ITEM-28383 Coil ITEM-28371 Stuart Turner Pump ITEM-28379 SCIEX Equipment Piece ITEM-28385 Vibration GeneratorITEM-28382 Unknown metal component ITEM-28084 Alaris Infusion System ITEM-28386 Plitron ComponentITEM-28375 Lambda Alpha 600W ITEM-27965 Elgameter Elgastat ITEM-28380 Coil C ITEM-28367 Graseby PCA Pump 3300 ITEM-27940 Glassware Stand ITEM-28086 Graseby PCA Pump 3300 ITEM-28085 Graseby PCA Pump 3300 ITEM-27955 Miscellaneous electrophoresis equipment ITEM-28372 Flowgen AccessoryITEM-28373 Durapipe Accessory ITEM-27960 4x system controllers ITEM-27966 Orion Star A111 pH Meter ITEM-27961 Miscellaneous pieces left over from ITEM-18980 ITEM-27964 Grant Water Bath Stirrer ITEM-27957 Biometra PS304 II ITEM-27959 Cuvettes 10x4x45mm ITEM-27956 Consort E143 ITEM-27946 8x boxes of 110x30 mm thermopaper ITEM-27947 Precision Microplate Reader ITEM-27945 Vickers Instruments Microscope in box ITEM-27958 Bag of Short clamps ITEM-27949 Microliter Syringe 100 µL REAGENT ITEM-27951 Microliter 100 µL Syringe ITEM-27954 Flowgen MH1070B ITEM-27952 Flowgen MH1070B ITEM-27953 Flowgen MH1070BITEM-27941 Plastic components ITEM-27942 Cobra Fara sample wheels & accessories ITEM-27943 500 Watt Auto TransformerITEM-27944 Vacuum Pump ITEM-27948 Grant LTD6G ITEM-27939 Box of 1.5 ml microtubes ITEM-27938 Mixed Lab GlassITEM-21723 VG Pirani UnitITEM-26098 Glassware

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.