Amersham Biosciences IN Cell Analyzer 1000 Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The FACSCanto II system is an easy-to-use benchtop analyzer that delivers proven performance, accura (more)cy, and high-quality results. The FACSCanto II can be configured with two or three lasers to detect up to eight colors. It features many innovations, including a true fixed alignment flow cell to minimize startup time and improve  reproducibility. The optical system maximizes signal detection and increases sensitivity and resolution for each color in a multicolor assay. These and other capabilities make the BD FACSCanto II ideal for today’s busy clinical lab, providing a high degree of automation and quality control. With optimal reproducibility, the FACSCanto II system reduces hands-on technician time and costs associated with repeat testing. Lasers: 405-nm solid state diode, 30-mW fiber power output 488-nm solid state, 20-mW laser output 633-nm HeNe, 17-mW laser output Laser Configuration: Spatially separated beams with 9 x 65- μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 180 x 430-μm rectangular quartz flow cell Collection Optics: Optical-gel coupled 1.2 NA lens FSC Resolution: 1.0 μm SSC Resolution: 0.5 μm Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT FSC Detector: Photodiode with 488/10 BP SSC Detector: PMT with 488/10 BP Fluorescence Detectors: 8 PMTs in 4-2-2 configuration Violet Laser Dyes: Pacific Blue, AmCyan (455, 488 nm) Blue Laser Dyes: FITC, PE, PerCP or PerCP-Cy 5.5, PE-Cy 7 (525, 575, 678 or 695, 785 nm) Red Laser Dyes: APC, APC-Cy7 (660, 785 nm) Detector Bands: Violet Laser: 450/50; 502 to 525 nm Blue Laser: 530/30; 585/42; >670; 780/60 nm Red Laser: 660/20; 780/60 nm Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF Max Particle Size: 50 μm Sample Flow Rate: 10 μL/min to 120 μL/min Sample Acquisition Rate: 10,000 events/second, 6 compensated fluorescence parameters and 2 scatter parameters Sample Dead Volume: 30 μL (BD Falcon tubes 12 x 75-mm) Dimensions (DxWxH): Cytometer: 610 x 910 x 640 mm Fluidics cart: 610 x 790 x 640 mm Weight: Cytometer: 145 kg Fluidics cart: 51 kg

2 x Becton-Dickinson Remote Pre Amp - BD Biosciences LSR II Boards These were removed from a univers (more)ity lab where they were surplus to requirements. They are in good cosmetic condition but have not been tested.

MoFlo Astrios EQS Cell Sorter in BSL Hood. All units are in good used cosmetic condition. The system (more) powers up as it should. We were informed by the lab that the Red laser is faulty and requires replacement. The unit has the following lasers installed: 1 X 640NM - 106MW.1 X 561NM - 202MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 09/30/2013. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use.Powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser &amp; computer system powers up fine. 1 x Thermo/Haake SC100/A28 re-circulator/chiller.Powers up fine. 1 x Intellipower UPS.Powers up fine. 1 x Jun-Air OF302 Silent Air Compressor.It was noted by the lab that this is quite loud. We powered it on and it sounds normal for one of these units. Also includes various spares and accessories shown in pictures.3 x '100' spare nozzle tips8 x '70' spare nozzle tips.

BD Accuri C6 Flow Cytometer This system was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition and powers on with all lights and buttons functioning. No further testing has been conducted due to the absence of software. The power supply is included. Also included: - 2x Large Waste Bottle - 2x Small Waste Bottle

Temperature range: +7°C to 85°C Speed: 3 – 4 rpm (± 1) Max No. of Tubes: 3 large 80 mm tubes (2 incl (more)uded) Dimensions (DxWxH): 555 x 325 x 375 mm Internal Dimensions (DxWxH): 320 x 270 x 250 mm

This S&amp;M CAHN 28 Automatic Electro Microbalance Model 10028E was removed from a university lab w (more)here it was surplus to requirements. The unit powers up but the lamp is not working. &nbsp;E3 appears on the screen when pressing the CAL button. Placing weights on the scales generates numbers but they do not match the weights placed. It probably needs some sort of calibration. It was not tested further.

Hoefer PS600 Electrophoresis Power Supply Voltage 10 to 600 V in 1 V step Current 4 to 750 mA in 1 m (more)A steps Maximum Wattage 150 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 600 V, 3 to 750 mA, 150 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS600 Electrophoresis Power Supply is a robust midrange solution designed for a wide range of electrophoresis and blotting techniques, including large format and high throughput applications. Featuring a compact design, large handle, and user-friendly interface, the PS600 is easy to set up and operate in any lab setting. Its large, easy-to-read LED display allows for simple configuration of constant voltage or current parameters, timer settings up to 999 minutes, and effortless initiation of runs. With a power output range of 5 to 600 V and 3 to 750 mA, this unit provides a dependable 150 W of maximum power. The PS600 supports three key modes of operation: Constant Voltage Mode, where the power supply maintains the user-selected voltage by adjusting the current flow; Constant Current Mode, where the supply maintains the chosen current by modulating the voltage supplied; and Automatic Crossover, which seamlessly shifts between modes when the constant parameter cannot be sustained due to power limits. Additional features such as automatic recovery after power failure, short circuit and open circuit protection, and four sets of 4 mm output jacks add to its versatility and safety. Ideal for both continuous and timed operations, the Hoefer PS600 ensures reliable performance for various electrophoresis applications. INCLUDED: The Hoefer PS600 Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 200 g.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).