Invitrogen XCell SureLock Electrophoresis Cell

This Beckman Coulter Genomelab GeXP Genetics Analysis was removed from a university lab where it was (more) surplus to requirements. The item powers on, we are unable to test it further at our facility. The lab confirmed it was in working order prior to removal. Successfully performed self-calibration upon powering up. It is in good cosmetic condition internally and externally, with minor marks from use. The power lead and control cable are included.

Hoefer SE600X Chroma Deluxe Dual Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glas (more)s Plate Sizes (W x H) 18 x 16 cm or 18 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 16 cm - Gels are fully submerged for greater temperature equilibration - Produces straight lanes and sharp,well-defined bands - Run up to four gels (maximum 112 samples) at one time under identical conditions - Accommodates denaturing and native polyacrylamide gels, and the second-dimension of 2-D electrophoresis - Run gels at uniform temperature from 1 to 45°C - A wide array of accessories enables you to tailor gel configurations to your needs The Hoefer SE600X Chroma Deluxe Dual Cooled Vertical Protein Electrophoresis Basic Unit is an advanced, ergonomic system designed for efficient protein separation and gel handling. With dual cooling capabilities, the SE600X offers precise temperature control across fully submerged gels, resulting in superior temperature equilibration and sharp, well-defined bands. Accommodating glass plates up to 18 x 16 cm, this unit is ideal for labs focused on achieving high-resolution protein and nucleic acid analysis. Its flexible design supports a variety of applications, including denaturing and native polyacrylamide gels, as well as the second-dimension of 2-D electrophoresis. The SE600X can run up to four gels at once, allowing for simultaneous processing of up to 112 samples under identical conditions—ideal for high-throughput and comparative studies. With an array of accessories available, this system is easily customizable, enabling labs to configure gel setups tailored to specific research needs. Operating smoothly in standard lab conditions, it handles temperatures up to 45°C and humidity up to 80%, while power settings of up to 1000 V and 500 mA ensure reliable performance across diverse experimental setups. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm-6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Combs, 15-well, 1.5 mm thick, 2 pcs - Spacers, 1.5 mm thick, 2 cm wide, 4 pcs INCLUDED: The Hoefer SE600X Chroma Deluxe Dual Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm-6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

NOVEX QuickPoint EI9700 Electrophoresis Cell. Cell dimensions (L/W): 11*12*16 cm. Gel size: 8*8 cm.  (more)Lower buffer chamber capacity: 600 L. Upper buffer chamber capacity: 200 mL. Cell voltage limit: 1500 V. Cell power limit: 50 watts. Novex precast gels (not included) are only 12.5 cm long and can be used in 15 minutes. Novex Quickpoint (from Invitrogen) is a fast and easy acrylamide gel electrophoresis system for separating nucleic acids. It can be used in many applications in place of large sequencing gels such as in RNase protection (RPA), differential display and phage display. The system can also be used to run sequencing reactions where short DNA read lengths (60-80bp) may be sufficient, such as in site directed mutagenesis. This system uses a pH-neutral buffer that increases the stability of the gel and allows better resolution of bands compared to the usual TBE buffer.

Biorad MINI-SUB CELL GT electrophoresis cuvette. Includes cover and power cables, 1 gel tray, 1 limi (more)ter for the formation of gels and 2 combs of 8 and 15 wells, respectively. User manual. Specifications:

Amersham ECL Gel Box is a mini-gel system for high quality separation of proteins. Amersham ECL Gel  (more)is compatible with Tris-Glycine buffer and contain no SDS, makingit ideal for protein analysis under both native and denaturing conditions. Amersham ECL Gel is compatible with standard protein detection protocols.

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

As a workhorse for HPLC method development, XBridge BEH C18 sorbent can be used over an entire range (more) of mobile phase pH (1-12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

External dimensions (WxDxH): 601 x 594 x 631 mm Internal dimensions (WxDxH): 480 x 424 x 380 mm Max  (more)single load: 10 L Max symmetrical distributed load: 30 kg Weight: 110 kg Equipped with waste liquid connector