Gene Pulser MXcell Electroporation System

System consists of: Bio-Rad Mini-Sub Cell GT Electrophoresis Cell Bio-Rad PowerPac HV High-Voltage P (more)ower Supply Mini-Sub Cell GT: Bio-Rad offers a range of mini horizontal electrophoresis chambers to resolve DNA fragments on either handcast agarose gels or ReadyAgarose precast gels. These cells include a buffer tank, safety lid with cables, and leveling bubble. Fast and flexible, the Mini-Sub cell GT cell is our most popular classroom gel box. The Mini-Sub cell GT cell holds either a 7 x 7 cm or a 7 x 10 cm gel tray. A 10 cm agarose gel poured with two 8-well combs easily accommodates two student teams at a time. At 100 V, this cell resolves DNA fragments from 20–20,000 base pairs in just under 30 min. Cell size (WxLxH): 120 x 260 x 65 mm Gel tray sizes (OD) (WxL): 70 x 70 mm ReadyAgarose gels accommodated: Yes, mini format Sample throughput: 8–30 Base buffer volume: ~270 ml Buffer recirculation: No Bromophenol blue migration: 4.5 cm/hr (at 75 V) PowerPac HV: Output (programmable): Voltage 20–5,000 V, Current 0.01–500 mA, Power 1–400 W Type of output: Constant voltage, constant current, constant power, or constant temperature (with automatic crossover) Timer control: 1 min–99 hr 59 min, fully adjustable Volt-hour control: Yes, 99,999 V-hr Pause/resume function: Yes Display functions: 128 x 64 pixel, yellow-green backlit graphics LCD Programmable methods: Stores up to 9 basic and 9 IEF methods, each with up to 9 steps Real-time editing: Yes Real-time clock: Yes Automatic recovery after power failure: Yes, user-selectable; setup values maintained Data transfer/archiving: Yes Temperature control: Yes, via temperature probe (not included); 30–90°C ±2°C Microampere readout and control: Yes Safety features: No-load detection, sudden load change detection, ground leak detection, overload/short circuit protection, overvoltage protection Number of output jacks: 4 sets in parallel Dimensions (WxLxH): 75 x 340 x 100 mm Weight: 2.85 kg

The QIAxcel Advanced system replaces traditional, labor-intensive gel analysis of DNA and RNA by ful (more)ly automating sensitive, high-resolution capillary electrophoresis of up to 96 samples per run. The QIAxcel ScreenGel software ensures convenient analysis and documentation of data. The QIAxcel Advanced system operates in conjunction with the QIAxcel DNA Kits and QIAxcel RNA QC Kit v2.0

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ZYMARK TurboVap II Evaporation/Concentrator System The Turbovap 2 has 6 sample positions of 200 ml T (more)he TurboVap II Concentrator Workstation is a microprocessor-controlled concentrator that provides automated sample evaporation, unattended operation, convenience and speed. Water bath capacity: 6.4 L of distilled water Gas Supply Requirements: Minimum inlet pressure 30 psi/2.1 bar. Maximum inlet pressure 80 psi/5.5 bar. Power supply: 220–240 V~, 50 Hz, 5 A Dimensions (LxDxH): 53.8 cm x 30.5 cm x 30.5 cm / 21.2" x 12" x 12" Weight 18.4 kg/40.5 pounds Without tubes / Matra With traces of rust Functional heating system No leak optical sensor not checked

Bench scale Defender 3000 i-D33 in Ohaus stainless steel Ideal for general weighing, simple counting (more) and checkweighing applications in humid environments or when frequent cleaning of environments is required. The Defender 3000 Series features a simple yet rugged stainless steel design and an IP67 stainless steel gauge with tactile keys, multi-color backlit LCD display, standard AC power or rechargeable battery operation, and flexible mounting options. In weight control mode, the display changes color (yellow / green / red) to alert the user when it is within the target weight range. Applications Weighing, weight control, counting, totalization Display 7-segment LCD with multicolor backlight Operation AC power cord (supplied) or rechargeable battery (supplied) Communication RS232 interface included and optionally USB Device or Ethernet for printing or data connectivity. Structure 304 stainless steel platform and frame, stainless steel IP66 gauge, stainless steel IP67 load cell, non-slip rubber adjustable feet Construction features Overload protection up to 150% of range

Cabin / Suction hood HI5VP FTM TECHNOLOGIES Standard single-station cabin without door for laborator (more)y The cabin hoods are used for filtration needs requiring a space containment. Construction: aluminum profiles, 6 mm thick safety glass Use: Application in aerosol can, spray or gun, spraying... Handling of chemical products in the laboratory, varnishing... Also suitable for solvent cleaning tanks or machines giving off heavy fumes. Can be used: In recycling: Activated carbon filter, particle filter or HEPA H14 filter In external discharge (dust filter + Ø125 mm exhaust duct) Variable flow rate: from 50 to 450-600 m3/h Power: 80 W Power supply: 230 V / 50 Hz W x H x D: 800 x 700 x 700 mm Weight: 35 kg Maintenance: Periodic filter change Rear outlet: Yes, external Ø125 mm exhaust (external discharge)

Refurbished Thermo Herasafe KS 18 Biological Safety Cabinet. 6 months warranty. Microbiological safe (more)ty cabinet HERAsafe KS 18, ergonomic safety cabinet class 2 according to EN 12469, for safe working in laboratory safety levels 1 to 3, with display in the working area and remote control for increased safety and contamination protection. The stand is included in the price. Delivery incl. new pre-filter and main filter