Canon XF305 HD PAL Video Camera Camcorder and Charger_Power Adapter

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This SYNGENE GeneFlash Gel Imaging System with PULNiX TM-300 Camera was removed from a university la (more)b where it was surplus to requirements. The system powers up and is in full working order, though one of the bulbs in the transilluminator needs replacing. It is in good cosmetic condition with minor marks from use. Camera PULNiX - TM-300Transilluminator - GVM200 Internal dimensions - 35 x 37 x 40 cm

Canon XF305 HD Video Camera with Charger w/ Power Adapter This Video Camera was removed from a unive (more)rsity lab where it was surplus to requirements. The item is in reasonably good cosmetic condition and is in full working order. Accessories included: Shoulder soft carry bagPower lead

PicoView PV 5000 w/ Model-XC-ST30CE Camera Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition, we are unable to power on or test it further at our facility. This item is fitted with the following: - Melles Griot 160/0.17 2.5/0.07 Objective - CCD Video Camera Module

Nikon OPTIPHOT-2 Microscope System with Sony CCD-IRIS Camera This system was removed from a universi (more)ty lab where it was surplus to requirements. All included item are in good cosmetic condition. The microscope powered on via test leads due to a disconnected door trip switch.Voltage selector, lamps, and stage movement are all functioning correctly. The cabinet is faulty, but the scope inside is operational. System Components: - Microscope Base: Nikon OPTIPHOT-2 with Nikon Transformer Model UN - Objectives Included: - Nikon 241187 M Plan 40/0.40 210/0 SLWD - Nikon 322002 M Plan 100 0.90 Dry 210/0 - Nikon 322580 M Plan 60 0.80 210/0 - Nikon 334439 M Plan 40 0.65 210/0 - Nikon 328356 M Plan 20 0.4 LWD 210/0 - Additional Equipment: - Bruker Infrared Microscope Power Supply - Door Trip Switch Override - Sony CCD-IRIS Camera Condition and Testing:The microscope was powered on using test IEC leads due to the door trip switch being disconnected, preventing a direct power connection.- Voltage selector is operational. - Both lamps power on as expected. - Stage movement is functioning correctly.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

External dimensions (WxDxH): 1196 x 616 x 1968 mm Internal dimensions (WxDxH): 1050 x 524 x 1742 mm  (more)Weight: 483 kg Min. quantity of exhaust air 10 times: 10 m³/h Pressure difference at 10 times: 5 Pa Differential pressure at 10-fold EK5/AK4: 5 Pa Floor load: 528 kg/m² Maximum load: 600 kg Max. load tray: 60.00 kg Collecting capacity bottom sump tray: 29 litres

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

HTA Xdc-96pro HT112E Automated Capper for 96 Well Format Sample Storage Tubes This was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and runs through the start sequence without fault. It is in good cosmetic condition with marks from use.

Memmert IN450 Natural Convection Incubator 449L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 449 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Spacious 449 L (15.9 cu.ft.) capacity, suitable for a wide range of applications - ControlCOCKPIT with SingleDISPLAY, adaptive PID-microprocessor controller and high-definition TFT-color display - Inner glass doors with fully insulated stainless steel exterior doors and 2-point compression locking system - Adjustable settings for temperature (Celsius or Fahrenheit), air flap position, and timer, with calibration for three user-selected temperature values - Natural convection system with pre-heated fresh air admixture through electronically adjustable air flap - Comprehensive AtmoCONTROL software for data logging, available via Ethernet or USB - Maximum chamber load of 661 lbs, with eight shelf positions and a 66 lbs load capacity per shelf The Memmert IN450 Natural Convection Incubator 449L, 115V offers a generous 449 L (15.9 cu.ft.) chamber, ideal for a variety of applications requiring consistent temperature control. With a temperature range from +20°C to +80°C, it can maintain precise settings as low as 5°C above ambient. The ControlCOCKPIT with SingleDISPLAY provides adaptive control via a high-definition TFT display, allowing easy adjustments in temperature (Celsius or Fahrenheit), air flap position, and timer settings. Featuring an inner glass door within a fully insulated stainless steel exterior with a 2-point compression locking system, the incubator combines visibility with security. The natural convection system and pre-heated fresh air admixture ensure uniform chamber conditions, while AtmoCONTROL software enables efficient data logging and management. With a sturdy design supporting up to eight shelves, a max load of 661 lbs, and advanced safety features, this incubator meets the rigorous demands of laboratory environments. INCLUDED: The Memmert IN450 Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).